Geely Emgrand X7. Manual part — 269
Geely Emgrand X7. Manual part - 269
Inspection Procedure:
1. Inspect all oil pump parts for
worn and torn.
2. Apply clean engine oil to all oil
pump parts.
Precautions:
A: Apply lubrication grease to the
oil pump gear chamber in order
to ensure initial oil pump
lubrication.
B. When :install engine oil pump
gear . shall aim at reference
position .
FE02-0370b
3. Install oil pump rear cover, and
tighten connecting bolts.
FE02-0371b
1075
2.14.8.3 Replacement of Oil Pan
Dismantlement Procedure
Warning: Refer to "Warning on
Battery Disconnection" in
"Warnings and Precautions".
Warning: Refer to Warning on
Vehicle Lifting and Jacking in
Warnings and Precautions.
1. Disconnect the battery negative
electrode cable. Refer to 2.11.8.1
Battery Disconnection.
2. Lifting
and
Jacking
Vehicle
3. Loosen oil drain bolt of engine
oil reservoir, and drain
lubricating oil from engine
crankcase.
FE02-0372b
4. Dismantle anti-dust plate of
crankshaft case.
FE02-0373b
5. Dismantle the fixing bolts and
nuts of oil pan.
FE02-0374b
1076
6. Dismantle the oil sump from the
cylinder body.
FE02-0375b
Installation Procedure:
1. Inspect and clean the strainer
before installing the oil pan.
FE02-0376b
2. Clean combination surface of oil
reservoir and cylinder.
3. Apply sealant uniformly on
engine oil reservoir disc.
4. Install oil reservoir, and tighten
16 fixing bolts and nuts
according to the sequence shown
in figure.
Torque
:
9N.m(metric )
6.7lb-ft(English system)
1
11
6
14
8
4
16
10
9
5
3
12
15
13
7
2
FE02-0377b
1077
5. Install the crankcase dust guard.
FE02-0372b
6. Install and tighten the oil
reservoir disc refueling bolt.
Torque
:
9N.m(metric )
6.7lb-ft(English system)
FE02-0373b
1078
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст