Geely Emgrand X7. Manual part — 160
Geely Emgrand X7. Manual part - 160
2.11.6 Removal and installation
2.11. 6 . 1disconnect and connect process of battery cable
Disconnecting Procedure:
Warning: Refer to "Warning on Battery Disconnection" in "Warning and Precautions"!
1. Turn off all electrical equipment,
and turn the ignition switch to
"OFF" position.
LOCK
ACC
ON
ST
AR
T
LOC
K
ACC
ON
S
T
A
R
T
NL02-0356b
2. Release the battery negative
cable fixing bolt and disconnect
the battery negative cable.
NL02-0357b
3. Release the battery positive cable
fixing bolt and disconnect the
battery positive cable.
NL02-0358b
639
Connecting Procedure:
1. Connect battery positive cable,
and tighten the fixing nut.
Torque:10 Nm(Metric) 7.4
lb-ft(English system)
2. Make sure the ignition switch is
turned to "OFF" position.
NL02-0358b
3. Connect the battery negative
cable.
Torque:10 Nm(Metric) 7.4
lb-ft(English system)
NL02-0357b
640
2.11.6.2 Replacement of Battery
Warning: refer to "warning of battery disconnection" in "warnings and precautions".
Dismantlement Procedure
1. Disconnect the battery negative
cable. Refer to 2.12.6.1 Battery
Cable Disconnection/Connection
Procedures.
2. Dismantle the battery fixing strap
nuts.
NL02-0361b
3. Remove the battery .
NL02-0362b
4. Remove the battery base plate.
NL02-0363b
641
Installation Procedure:
1. Install the battery base plate.
Note: The battery base plate is
retained by two convex sets, and pay
attention during installation to
aligning the convex with the bracket
holes.
2. Install
the
battery.
NL02-0364b
3. Install the battery fastening board
and tighten the strap nuts.
Torque:10 Nm(Metric) 7.4
lb-ft(English system)
4. Connect the battery negative
cable .
NL02-0361b
642
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст