Geely Emgrand X7. Manual part — 368
Geely Emgrand X7. Manual part - 368
9. Fixing bolt between rear suspension No.2 swing
arm and rear axle spindle head bearing seat
Torque: 80 Nm (Metric) 59.2 lb-ft (English system)
10. Install left right rear wheel.
11. Lower
the
vehicle.
NL04-0039b
1471
4.3.7.8 Rear hub unit replacement
Dismantle procedure
1.
For dismantling of left, right rear wheel, refer to
4.4.5.1 replacement of wheel.
2.
For lifting of the vehicle, see 1.3 lifting vehicle.
3.
For dismantling of rear brake pad, refer to 6.3.5.1
replacement of brake pad - rear.
4. For dismantlement of the rear brake disc, see
6.3.5.3 Replacement of brake discs - rear.
5. For removal of the rear wheel speed sensor, see
6.6.7.3 Replacement of (rear) wheel speed
sensors.
6.
Remove the rear hub unit fixing bolt.
7.
Extract the rear hub unit.
NL04-0050b
Installation procedure:
1.
Install rea wheel hub unit and tighten fixing bolt.
Torque :80Nm (Metric) 59.2lb-ft (English system)
2.
Install rear wheel speed sensor.
3.
Install rear brake disc.
4.
Install rear brake pad.
5.
Install the front-right rear tire.
6. Lower
the
vehicle.
NL04-0050b
1472
4.4 Wheel and tire
4.4.1 Specifications
4.4.1.1 Fastener specifications
Torque Range
Fastener Name
Model
Metric (N.m)
English system
(lb-ft)
Vehicle wheel nut
M12×1.5
100~120 74~89
Tire specification
Specification
225/65 R17 102H
Cold pressure (front /rear)
220/220 kPa (Metric) /32/32 psi (English system)
Wheel rim
17×7J
Aeration pressure conversion table
kPa psi kPa psi kPa psi
140 20 185 27 235 34
145 21 190 28 240 35
155 22 200 29 250 36
160 23 205 30 275 40
165 24 215 31 310 45
170 25 220 32 345 50
180 26 230 33 380 55
1473
4.4.1.2 Front suspension position specification
Note: the following parameters refer to the technical parameters of the whole vehicle under the reorganizing
state!
Left internal
/ external
38.83°/30.77°
Front wheel
angle
Right
internal /
external
38.83°/30.77°
Front wheel camber
-0.21°±0.75°
Kingpin inclination angle
11.58°±0.75°
Kingpin caster angle
6.0°±0.75°
Front wheel toe-in
2.8±0.2 mm/0.04±0.008 in
Front tread
1560 mm/61 in
4.4.1.3 Rear suspension position specification
Note: the following parameters refer to the technical parameters of the whole vehicle under the reorganizing
state!
Rear wheel toe-in
-3.4±2 mm/-0.13±0.08 in
Rear wheel camber
-0.98°±0.75°
Rear tread
1560 mm/61 in
Wheelbase
2661 mm/105 in
1474
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст