Geely Emgrand X7. Manual part — 575
Geely Emgrand X7. Manual part - 575
11.6.8.7 Front/rear washing motor and hose replacement
Replacement of washer motor
Dismantlement procedure
Warning!
Warning: refer to warning on battery
disconnection in warnings and
precautions.
1. Completely rotate front wheel to
right direction to allow for
enough operation space.
2. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
3. Dismantle the left front fender
liner. Refer to 12.10.1.9
Replacement of Front Fender
Liner.
NL11-0135b
4. Disconnect the front / rear washer
motor harness connector.
5. Disconnect the washing fluid
hose from the front and rear
washer motors.
6. Extract the front and rear
washing fluid pumps.
NL11-0136b
Installation procedure:
1. Install front, rear washer motor.
2. Connect the washer liquid hose.
NL11-0136b
2299
3. Connect washing agent pump
wire harness connector.
4. Install right front wheel
splashboard.
5. Connect the battery negative
cable.
6. Turn the front wheels back to
straight.
NL11-0137b
Replacement of hose
Dismantlement procedure
1. Completely rotate front wheel to
right direction to allow for
enough operation space.
2. For dismantling of engine cover
vibration insulation pad, refer to
12.10.1.2 Replacement of engine
cover vibration insulation pad.
3.
Disconnect connection of
washing fluid and nozzle, Refer
to 11.5.8.5 wiper nozzle
replacement.
4. Dismantle the left front fender
liner. Refer to 12.10.1.9
Replacement of Front Fender
Liner.
NL11-0138b
5. Disconnect the washing fluid
hose from the front and rear
washer motors.
6. Dismantle the front washing fluid
hose.
NL11-0139b
2300
7. Detach the rear washing fluid
hose from the rear wiper nozzle.
NL11-0133b
Installation procedure:
1. Install washing solution hose
onto front, rear washer motors.
NL11-0140b
2. Pass through and install front
wiper washing reservoir hose.
3. Connect washing agent hose to
wiper nozzle.
4. For installation of sound
insulation pad of engine cover,
refer to "Replacement of sound
insulation pad of engine cover".
NL11-0130b
2301
5. Install the rear washing fluid hose
onto the rear wiper nozzle.
6. Install the front fender liner.
NL11-0132b
2302
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст