Geely Emgrand X7. Manual part — 607
Geely Emgrand X7. Manual part - 607
11.9.4 Part position
11.9.4.1 Component position
Mechanical lock cylinder
1
2
NL11-2197b
1. Front door lock cylinder
2. Rear back-door lock assembly
2427
11.9.5 Electrical schematic diagram
11.9.5.1 Electrical schematic diagram
NL11-2196b
Combination
instrument
Speed signal
Key (radiofrequency
signal)
Left front door switch
Interlock switch
4doors contact switch
Ignition switch
Left front doorlock
assembly
Right front doorlock
assembly
Left reardoorlock
assembly
Right reardoorlock
assembly
Back door lock motor
2428
11.9.6 Diagnostic information and steps
11.9.6.1 Diagnosis descriptions
Refer to 11.7.2 description and operation to get familiar with the system functions and operation
before starting system diagnosis, so that it will help to determine the correct diagnostic steps, more
importantly, it will also help to determine whether the situation described by the customer is
normal.
11.9.6.2 Visual inspection
–
Inspect installed aftermarket equipment that may affect the operation of central control door
lock system.
–
Inspect components easy to access system to identify whether there is a significant damage
that may lead to the fault.
– Inspect and repair the poor connection or open circuit malfunction for power supply or
ground circuit before replacing the components, if the operation of all the door lock is
invalid.
11.9.6.3 Fault symptom list
Fault
symptom
Suspected fault part
Maintenance scheme
Mechanical
key can not
lock / unlock
the door
1. Power supply malfunction of central
control lock
2. Poor connection of unlock / lock switch
inside left front door lock
3. Poor connection of harness connector
4. Poor connection of relative ground
5. Harness
malfunction
6. Malfunction of central control lock motor
7. BCM
malfunctions
1. Inspect the power supply
circuit.
2. Inspect the harnesses and
connectors.
3.
Inspect the ground
malfunction
4. Replace the door lock
motor assembly.
5. Service the BCM and
replace if necessary.
Central
control lock
switch can
not lock /
unlock doors
1. Power supply malfunction of central
control lock
2. Central control lock switch of left front
window regulator switch assembly
malfunction
3
Poor connection of harness connector
4. Poor connection of relative ground
5. Harness
malfunction
6. Malfunction of central control lock motor
7. BCM
malfunctions
1. Inspect the power supply
circuit.
2. Inspect the harnesses and
connectors.
3.
Inspect the ground
malfunction
4. Inspect the left front door
window regulator switch.
5. Replace the door lock
motor assembly.
6. Service the BCM and
replace if necessary.
Only the left 1. Power supply malfunction of central 1. Inspect the power supply
2429
front door
lock can not
lock /unlock
the door
control lock
2. Poor connection of left front door lock
harness connector
3. Poor connection of left front door lock
ground
4. Harness
malfunction
5. Malfunction of left front door central
control lock motor
6. BCM
malfunctions
circuit.
2. Inspect the harnesses and
connectors.
3.
Inspect the ground
malfunction
4. Replace the door lock
motor assembly.
5. Service the BCM and
replace if necessary.
The remote
control unit is
unable to
lock/open
door
1. The application environment has
electromagnetic interference.
2. Remote
controller
malfunction
3. Power supply malfunction of central
control lock
4. Poor connection of harness connector
5. Poor connection of relative ground
6. Harness
malfunction
7. Malfunction of central control lock motor
8. BCM
malfunctions
1.
Move to a
non-interference
environment.
2.
Inspect the remote
controller battery, and
replace the remote
controller if necessary.
3. Inspect the power supply
circuit.
4. Inspect the harnesses and
connectors.
5.
Inspect the ground
malfunction
6. Replace the door lock
motor assembly.
7. Service the BCM and
replace if necessary.
Central lock
under the
anti-theft
state is
unable to
automatically
unlock.
1. Insufficient voltage of power supply
2. Poor connection of harness connector
3. Poor connection of relative ground
4. Harness
malfunction
5. Malfunction of central control lock motor
connection switch
6. BCM
malfunctions
1. Inspect the power supply
circuit.
2. Inspect the harnesses and
connectors.
3.
Inspect the ground
malfunction
4. Replace the door lock
motor assembly.
5. Service the BCM and
replace if necessary.
Door Lock
Runout
during
Driving
1. Mechanical lock mechanism malfunction
2. Poor connection of harness connector
3. Poor connection of relative ground
4. Harness
malfunction
5. Malfunction of central control lock motor
1. Adjust door lock
mechanism, if necessary,
please replace it.
2. Inspect the harnesses and
connectors.
3.
Inspect the ground
2430
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст