Geely Emgrand X7. Manual part — 18
Geely Emgrand X7. Manual part - 18
7. Engine
model
8. Engine
rated
power
9. Engine
displacement
NL01-0016b
The conformity certification label is located at the topside of the driver-side front frame plate.
1.9.1.4 Tire message billboard
NL01-0017b
Tire placard is located on the vehicle body surface under the driver door striker. For tire
information. Please refer to tire placard. Wheel and tire dimensions (including spare tire), inflation
pressures (including spare tire) and load capacity are specified on a tire placard.
1.9.1.5 Engine mark No.and position
Engine mark No,(JL4G18-E)
Brand
Complete vehicle model
Engine model
Max.design gross weight
Rated power of engine
Ex-factory dates
Engine displacement
Numberof the
transportable people
中国浙江豪情汽车制造有限公司制造
Tire pressure
Tire model
Air
pressure
Made by China Zhejiang Haoqing Automobile
Manufacturing co. , ltd
71
NL01-0018b
–
JL: Enterprise code
–
A: years (A means 2010)
– 4:
months
–
N: Ningbo base
– E:
4G18E
– 00001:
S/N
Engine identification number position
NL01-0019b
Engine identification number is stamped on the platform at the edge of cylinder on the side of air
inlet at engine flywheel end.
Notes: JLD-4G20、JLD-4G24 engine mark No. Position is same with JL4G18E.
1.9.1.6 Identification numberand position of manual transmission
Identification number label of manual transmission (JL-S170BⅡ)
72
NL01-0020b
1. JL: Enterprise code
2. S: Operation type
3. 170:
Torque
number
4. B: Improved code
Manual transmission Identification number label and its position
NL01-0021b
Notes: DSI transmission mark No. is same with JL-S170BⅡ.
Product certificate of
Zhejiang Geely Motor
Group Ltd
Product model:
Product name: Transmission
Inspecter:
Ex-factory
date:
This product is permitted to leave the
factory after strict inspection
73
1.10 Noise, vibration and abnormal sound
1.10.1 Description and operation
1.10.1.1 Diagnostic information and procedures
Wind noise/air sound
Warning!
Refer to "warning on assistant driving" in "warnings and precautions".
Notes:
When the technician checks the fault part to be repaired, the assistant shall drive the vehicle;
otherwise, it may cause personal injury.
A test drive is needed in order to identify the position of wind noise. In general, the wind noise
includes major leaks and minor leaks. If the repair process does not fix all the leaks, it will only
reduce wind noise, but not completely eliminate the wind noise.
A technician must bring the following tools to help diagnose the specific position of wind noise:
– Stethoscope
– Masking
tape
– Plug
strip
– Marking
pen
– Screwdriver
A road test should be carried out as following:
–
Select an even and straight road, with an east, a south, a west and a north exit.
–
Select a road with minimal traffic and noise in order to avoid affecting the test.
–
Test the vehicle at the speed when the noise is most obviously heard. Do not speed above
speed limit.
–
The noise can be identified as external wind noise, under the following conditions as soon as
lowering the windows of the running vehicle; the wind noise can be heard.
•
You may hear wind noise when drive vehicle after reduced window glass .
•
Internal wind noise is caused by air escaping from the car. The repair should take the
following approaches:
–
When trying to determine the leak position, attach tapes to the body pressure relief valve.
•
With confirm leakage position, Tape was sticked on the relief valve of door lock post. Use
stethoscope to identify the leak position.
•
Use masking tapes for temporary repair.
•
Continue the road test to confirm whether all the wind noise has been eliminated or there are
still leaks at other parts.
•
Return to workshop after having identified all the leaks during road test.
•
Use specialized methods and sealing material to carry out permanent repair,adopted special
position method and sealing material to permanent repair
74
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст