Geely Emgrand X7. Manual part — 558
Geely Emgrand X7. Manual part - 558
6. Install and tighten the fixing bolt
for the rear door window guide
groove.
Torque: 8Nm(Metric) 6lb-ft(English
system)
NL11-0054b
7. Paste the retaining membrane and
install the window lifter switch
bracket.
NL11-0055b
8. Install the door external trim
corner.
NL11-0056b
2231
9. Tighten the fixing bolt for the
door external trim corner.
Torque: 8Nm(Metric) 6lb-ft(English
system)
NL11-0057b
10. Install angle decoration of door
inner trimming plate.
11. Install the door interior trim
panel.
12. Connect the battery negative
cable.
NL11-0058b
2232
11.5.8.11 Replacement of rear door window regulator motor
Dismantlement procedure
Warning!
Warning: refer to "warning on battery
disconnection" in "warnings and
precautions".
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. For dismantling of rear door glass
lifter, refer to "replacement of
rear door glass lifter".
3. Dismantle the fixing bolts of rear
door glass lifter motor.
NL11-0059b
Installation procedure:
1. Install the fixing bolts of rear
door window regulator motor.
Torque:10Nm(Metric) 7.4lb-ft(English
system)
2. Install the rear door window
regulator.
3. Connect the battery negative
cable.
NL11-0060b
2233
11.5.8.12 Replacement of rear door window slot
Dismantlement procedure
Warning!
Warning: refer to "warning on battery disconnection" in "warnings and precautions".
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. For dismantling of door inner
trimming plate, refer to 12.9.1.9
Replacement of rear door inner
trimming plate.
3. Dismantle door inner trimming
plate angle decoration.
NL11-0040b
4. Dismantle fixing bolt of outer
angle decoration of rear door.
NL11-0041b
5. Remove the rear door external
trim mirror.
NL11-0042b
2234
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст