Geely Emgrand X7. Manual part — 550
Geely Emgrand X7. Manual part - 550
Test terminal
Test conditions
Specified value
DR08 (A)—DR08(B)
Upward
11-14V
DR08 (A)—DR08(B)
Downward
11-14V
DR18 (A)—DR18(B)
Upward
11-14V
DR18 (A)—DR18(B)
Downward
11-14V
Confirm whether the terminal voltage accords with the standard value.
9
Repair the open circuit fault of the upper and lower control signal circuits of the
fault-side electric rearview mirror.
(a) Repair open-circuit fault between up and down control signal circuit of fault side electric
rearview mirror.
Confirm whether the electric rear view mirror is working normally?
10
Replace side power rearview mirror motor assembly with fault.
(a) Replace power rearview mirror assembly with fault; refer to11.4.8.1 power rearview mirror
replacement.
Confirm whether the electric rearview mirror can be regulated left and right.
11
Inspect the left and right control signal circuit of the fault-side electric rearview mirror.
Yes
Go to step 12
No
Yes
The system is normal.
No
Yes
Go to step 10
No
2199
(a) Operate electric rearview mirror
left and right adjusting button of
left front glass lifter switch
(b) Meanwhile, use multimeter to
measure voltage between
terminal C and B of electric
rearview mirror wire harness
connector DR08 (left) or DR18
(right side) on fault side.
NL11-4025b
A
B
C
D
E
F
G
H
I
DR08/DR18 车外后视镜线束连接器
B
C
Test terminal
Test conditions
Specified value
DR08 (A)—DR08(B)
Upward
11-14V
DR08 (A)—DR08(B)
Downward
11-14V
DR18 (A)—DR18(B)
Upward
11-14V
DR18 (A)—DR18(B)
Downward
11-14V
Confirm whether the terminal voltage accords with the standard value.
12
Repair the open circuit fault of the left and right control signal circuits of the fault-side
electric rearview mirror.
(a) Repair open-circuit fault between left and right control signal circuit of fault side electric
rearview mirror.
Confirm whether the electric rear view mirror is working normally?
13
Replace side power rearview mirror motor assembly with fault.
(a) Replace power rearview mirror motor assembly with fault, Refer to
Confirm the completion of repair.
Yes
Go to step 13
No
Yes
Go to step 13
No
DR08/DR18 outer rearview
mirrorharness connector
2200
14
The system is normal.
11.4.7.11 power rearview mirror can not heat
See 11.10.6.3 rear air window defroster does not work.
Next
2201
11.5.8 Dismantle and install
11.5.8.1 Replacement of electric rear view mirror
Dismantlement procedure
Warning!
Warning: refer to warning on battery
disconnection in warnings and
precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
NL11-0004b
2. For dismantling of front door
treble speaker, refer to 11.2.7.1
Replacement of front door
speaker.
3. Disconnect power rearview
mirror harness connector.
4. Dismantle fixing nut of electric
rearview mirror.
NL11-0005b
Installation procedure:
1. Install electric rearview mirror
fixing nut.
Torque:8 Nm(Metric) 5.8 lb-ft(English
system)
NL11-0005b
2202
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст