Geely EC718, EC718RV, EC715, EC715RV. Manual part — 84
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 84
FE02-0070b
1.
Release fuel pressure. Refer to
2.
Disconnect the battery negative cable. Refer to
.
3.
Remove the rear seat cushion. Refer to
4.
Remove fuel pump inspection cover.
FE02-0071b
5.
Disconnect fuel pump harness connector.
FE02-0072b
6.
Disconnect the fuel pump inlet and outlet pipes.
Engine
Fuel System JL4G18-D
2-251
FE02-0073b
7.
Unscrew counter-clockwise and remove the fuel pump
lock ring.
FE02-0074b
8.
Remove fuel pump assembly.
Note
Pay attention to not to drop gasoline on the floor and
the interior, otherwise it will corrode sealant and the
interior.
Installation Procedure:
FE02-0075b
1.
Clean fuel pump seals and tank mating surface.
2.
Install new fuel pump seals.
3.
Install fuel pump assembly.
Note
During installation, make ensure the outlet pipe and
return pipe face the rear of the vehicle body,
otherwise the pipes can not be installed.
2-252
Fuel System JL4G18-D
Engine
FE02-0076b
4.
Install fuel pump clockwise to tighten fuel pump lock ring.
Note
During installation, make ensure the outlet pipe and
return pipe face the rear of the vehicle body.
FE02-0077b
5.
Connect the fuel pump outlet pipe.
Warning!
Refer to "Fuel Pipe Joints Warning" in "Warnings
and Notices".
FE02-0078b
6.
Connect the fuel pump return pipe.
Engine
Fuel System JL4G18-D
2-253
FE02-0079b
7.
Connect the fuel pump wiring harness connector.
FE02-0080b
8.
Install fuel pump inspection cover, note that the arrow is
pointing to the vehicle body front.
9.
Install the rear seat.
10. Connect the battery negative cable.
2.3.8.4 Fuel Level Sensor Replacement
Removal Procedure:
Warning!
Refer to "Release Fuel Pressure Warning" in "Warnings
and Notices".
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
2-254
Fuel System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст