Geely EC718, EC718RV, EC715, EC715RV. Manual part — 398
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 398
11.4.7.9 Reverse Lamp Inoperative
Schematic:
IF14
4
SO41
1
SO41
4
SO37
1
SO37
Reverse Lamp Switch
Left Reverse Lamp
Right Reverse Lamp
FE11-5344b
Diagnostic Steps:
Step 1
Check reverse lamp bulbs.
(a)
Remove the brake lamp bulbs.
Is the the bulb filament blown?
No
Yes
Step 2
Replace the reverse lamp bulbs.
(a)
Replace the faulty reverse lamp bulb.
Confirm brake lamps are working properly.
Yes
System normal
No
Step 3
Check the fuse IF14 circuit.
Body Electric
Lighting System
11-105
IF14
IF2
IF1
IF5
IF7
IF3
IF16
IF27
IF25
IF26
IF28
IF30
IF24
IF20
IF19
IF23
IF18
IF21
IF13
IF12
IF15
IF9
IF10
IF8
F17
F22
M
FE11-5346b
(a)
Check whether the fuse IF14 is blown.
Fuse Rating: 10 A
Is the fuse blown?
Yes
No
Step 4
Repair the fuse IF14 circuit.
(a)
Check the fuse IF14 short circuit.
(b)
Repair the circuits. Confirm that there are no short circuits.
(c)
Replace with fuses with rated current.
Confirm whether the reverse lamps are working properly.
Yes
System normal
No
Step 5
Measure the reverse lamp switch wiring harness connector EN22 terminal No.2 voltage.
1
2
Reverse Switch Harness Connector EN22
FE11-5347b
(a)
Measure the reverse lamp switch wiring harness connector
EN22 terminal No.2 voltage with a multimeter.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
No
Step 6
Repair the open circuit between the reverse lamp switch wiring harness connector terminal and the fuse
IF14.
(a)
Confirm the open circuit between the reverse lamp switch
wiring harness connector terminal and the fuse IF14 repair is
completed.
Confirm whether the reverse lamps are working properly.
11-106
Lighting System
Body Electric
Yes
System normal
No
Step 7
Check the reverse lamp switch.
(a)
Turn the ignition switch. Do not start the engine. Engage
reverse gear, disconnect the reverse switch wiring harness
connector.
(b)
Measure resistance between the brake switch terminal No.1
and No.2 with a multimeter .
Standard Resistance: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 8
Replace the reverse switch.
(a)
Replace the reverse switch. Refer to
.
Confirm whether the reverse lamps are working properly.
Yes
System normal
No
Step 9
Test continuity between the reverse lamp switch harness connector SO41/37 and reverse lamp switch
harness connector EN22 terminal No.1.
1
2
1
2
6
5
4
3
Reverse Switch Harness Connector EN22
Tail Lamp Harness Connector SO37/SO41
FE11-5348b
(a)
Confirm continuity between the reverse lamp switch harness
connector SO41/37 and reverse lamp switch harness
connector EN22 terminal No.1.
Confirm whether the reverse lamps are working properly.
Yes
System normal
No
Step 10
Repair the open circuit between reverse lamp wiring harness connector SO41/37 terminal No.1 and the body
ground.
Body Electric
Lighting System
11-107
1
2
6
5
4
3
Tail Lamp Harness Connector SO37/SO41
FE11-5349b
(a)
Confirm the open circuit between reverse lamp wiring
harness connector SO41/37 terminal No.1 and the body
ground repair is completed.
Confirm the repair completed.
Next
Step 11
System normal.
11.4.7.10 Courtesy Lamp Inoperative
Schematic:
Driver Side Courtesy Lamp
Passenger Side Courtesy Lamp
Left Front Door Lock Assembly
Right Front Door Lock Assembly
Body
Control
Module
FE11-5350b
11-108
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст