Geely EC718, EC718RV, EC715, EC715RV. Manual part — 494
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 494
Symbols
Indicator
Color
Hood Is Not Closed Warning Lamp
Red
Rear Compartment Lid (Hatchback)
Is Not Closed Warning Lamp
Red
Clock
Blue Background With White
Text
Body Electric
Instrument Cluster
11-489
11.15.2 Description and Operation
11.15.2.1 Description and Operation
The time is displayed as a 24-hour clock on the LCD screen.
Even if the engine is shut down, the time is still displayed. set
the time Through the time adjustment button (Refer to
).
Clock error is less than ±10 s per month.
Trigger Clock Settings
Pressing and holding (greater than 2 s) the time adjustment
button, it will enter the clock setting mode. The number of hours
and a colon blink at 1Hz frequency. This mode is hours
configuration mode. When the hour is set, the number will no
longer blink.
Set Up Hours
In the hours setting mode, the number of hours will increase
with a short rod press (more than 300 ms and less than 2 s). If
press and hold the adjustment rod more than 2 s, the number
of hours will increase at 5 h/s rate.
If the rod is not pressed in 5 s, it will enter the minutes setting
mode. The number of minutes and a colon blink at 1 Hz
frequency, as described above.
Set Up Minutes
In the minutes setting mode, the number of minutes will
increase with a short rod press (more than 300ms and less than
2 s). If press and hold the adjustment rod more than 2 s, the
number of minutes will increase at 5 h/s rate.
If the rod is not pressed in 5 s, the setting mode will end, the
clock will not blink.
11-490
Instrument Cluster
Body Electric
Clock Settings Flowchart
Clock Display
Press and Hold
Setting Hours
Press and Hold
Press Briefly
Automatic
Increase Hours
Increase By
One Hour
No Operation Longer Than 5 Seconds
Setting Minutes
No Operation Longer Than 5 Seconds
Increase By One
Minute
Press Briefly
Press and Hold
Automatic
Increase Minutes
FE11-1301b
Body Electric
Instrument Cluster
11-491
11.15.3 System Working Principle
11.15.3.1 Warning Lamps Control
The instrument cluster has two warning lamps and their power
is supplied by the battery (the battery is inside the instrument
cluster). they are:
–
Front Fog Lamp Indicator
–
Rear Fog Lamp Indicator
–
Hood Not Closed Warning Lamp
–
Rear Compartment Lid (Hatchback) Not Closed Warning
Lamp
The following instrument cluster warning lamps are directly
controlled by the hardware:
–
Front Fog Lamp Indicator
–
Rear Fog Lamp Indicator
Note
Other warning lamps are controlled by the CAN bus
signal.
11-492
Instrument Cluster
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст