Geely EC718, EC718RV, EC715, EC715RV. Manual part — 458
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 458
1
2
3
4
5
6
7
8
Body Control Module 3 Harness Connector IP27
FE11-5807b
(a)
Confirm the open circuit between the BCM harness
connector IP27 and the electric door lock assembly harness
connector repair is completed.
Confirm the repair completed.
Next
Step 15
System normal.
11.9.7.6 Super Locking Inoperative
Schematic:
Body Control Module
Left Front Door Lock Assembly
Right Front Door Lock
Assembly
Left Rear Door Lock
Assembly
Right Rear Door Lock
Assembly
Left
Front
Door
switch
FE11-5801b
Body Electric
Central Locking
11-345
Diagnostic Steps:
Step 1
Use the remote key to perform the super locking.
Is the remote control super locking working?
Yes
No
Step 2
Check for remote anti-theft system potential malfunction.
(a)
Check and repair the remote anti-theft system potential
malfunction.
Is the super-locking working?
Yes
System normal
No
Step 3
Use a mechanical keys to lock and unlock.
Is the mechanical key working?
Yes
No
Step 4
Repair the locking and unlocking malfunction.
(a)
Repair the locking and unlocking malfunction. Refer to
Mechanical Key / Central Locking Switch Can Not
,
Mechanical key / Central Locking
Switch Can Not Unlock All Doors
Confirm the lock and unlocking are working properly.
Confirm the Super Lock function is normal.
Yes
System normal
No
Step 5
Measure the BCM harness connector IP28 terminal No.9 voltage.
11-346
Central Locking
Body Electric
1
9
2
10
11
12
13
14
15
16
17
3
4
5
6
7
8
Body Control Module 2 Harness Connector IP28
FE11-5814b
(a)
Perform the super locking, while measure the BCM harness
connector IP28 terminal No.9 voltage with a multimeter.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
No
Step 6
Replace the BCM.
(a)
Confirm the Super Locking function is normal.
Yes
System normal
No
Step 7
Check the circuit between the BCM harness connector IP28 and the electric door lock assembly harness
connector.
(a)
Disconnect the BCM harness connector IP28 and the electric
door lock assembly harness connector.
(b)
Measure resistance between the BCM harness connector
IP28 and the electric door lock assembly super-locking
harness connector with a multimeter
Standard Resistance: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 8
Check the open circuit between the BCM harness connector IP28 and the electric door lock harness
connector.
(a)
Repair the circuit between the BCM harness connector IP28
and the electric door lock assembly super-locking harness
connector.
Confirm Super Locking function is normal.
Yes
System normal
Body Electric
Central Locking
11-347
No
Step 9
Replace the lock motor.
(a)
Replace the lock motor.
Confirm the repair is completed.
Next
Step 10
System normal.
11.9.7.7 Rear Compartment Lid Can Not Be Opened (Sedan)
Schematic:
2
SO54
1
SO54
M
Rear Compartment Lid Release Switch
Rear Compartment Lid Release Motor
Body
Control
Module
FE11-5815b
Diagnostic Steps:
Note
When there is not a remote control key, use the scan tool special setting function to drive the door locks. Select as the
following sequence: body control module / BCM special set features / rear compartment Lid (rear compartment) open
control.
Step 1
Use the remote key to open the rear compartment lid.
Is the remote key working?
11-348
Central Locking
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст