Geely EC718, EC718RV, EC715, EC715RV. Manual part — 352
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 352
9.2.4 Component Locator
9.2.4.1 Component Locator
1
2
3
6
5
4
FE09-1001b
Legend
1. Passenger Front Airbag
2. Passenger Curtain Airbag
3. Driver Curtain Airbag
4. Driver Side Airbag (Located inside the seat back)
5. Passenger Side Airbag (Located inside the seat back)
6. Driver Side Airbag and Clock Spring
Safety Protection Device
Airbag System
9-7
1
2
3
4
7
6
5
FE09-1002b
Legend
1. Front Collision Sensor (Right)
2. Airbag Control Module
3. Driver Side Collision Sensor
4. Passenger Side Collision Sensor
5. Passenger Seat Belt Pretensioner
6. Driver Seat Belt Pretensioner
7. Front Collision Sensor (Left)
9-8
Airbag System
Safety Protection Device
9.2.5 Schematic
9.2.5.1 Schematic
Instrument Cluster
Passenger Recognition Sensor
Left Front Collision Sensor
Right Front Collision Sensor
Driver Side Collision Sensor
Passenger Side Collision Sensor
Driver Front Air Bag
Passenger Front Air Bag
Driver Side Air Bag
Passenger Side Air Bag
Driver Curtain Air Bag
Passenger Curtain Air Bag
Driver Seat Belt Pretensioner
Passenger Seat Belt Pretensioner
Airbag Control Module
CAN-Bus
FE09-5101b
Safety Protection Device
Airbag System
9-9
9.2.6 Diagnostic Information and Procedures
9.2.6.1 Visual Inspection
–
Confirm Fault Symptoms
During diagnostic, the most difficult situation is that there is not any symptom. In this case, the technician must thoroughly analyze
the described fault, and then simulate the conditions and the environment when the fault occurs. Even for a very experienced
technician, if the fault system has not been confirmed before the diagnostic, it is likely to ignore a number of important things,
and misjudge a fault, which will lead to diagnostic failure.
–
Check the easy to access system components to identify whether there is a significant damage or potential failure.
–
Connectors and vibration pivot joints should be thoroughly examined. If it is a vibration caused fault, it is recommended to use
vibration method.
1. With a finger to gently shake the possible faulty part and inspect for malfunction.
2. Shake the connector vertically and horizontally gently.
3. Shake the wiring harness vertically and horizontally gently.
9.2.6.2 Fault Diagnostic Code (DTC) Table
Airbag Control Module Status
DTC Code
Description
B1021
Driver Front Airbag Circuit Short To GND
B1026
Passenger Front Airbag Circuit Short To GND
B1031
Driver Seat Belt Circuit Short To GND
B1036
Passenger Seat Belt Circuit Short To GND
B1041
Driver Side Airbag Circuit Short To GND
B1046
Passenger Side Airbag Circuit Short To GND
B1051
Driver Curtain Airbag Circuit Short To GND
B1056
Passenger Curtain Airbag Circuit Short To GND
B1022
Driver Front Airbag Circuit Short To + B
B1027
Passenger Front Airbag Circuit Short To + B
B1032
Driver Seat Belt Circuit Short To + B
B1037
Passenger Seat Belt Circuit Short To + B
B1042
Driver Side Airbag Circuit Short To + B
B1047
Passenger Side Airbag Circuit Short To + B
B1052
Driver Curtain Airbag Circuit Short To + B
B1057
Passenger Curtain Airbag Circuit Short To + B
B1023
Driver Front Airbag Low Resistance
B1028
Passenger Front Airbag Low Resistance
B1033
Driver Seat Belt Low Resistance
9-10
Airbag System
Safety Protection Device
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст