Geely EC718, EC718RV, EC715, EC715RV. Manual part — 328
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 328
FE07-0024b
3.
Mark the thead location on the inner steering horizontal
rod to facilitate the nut installation and adjustment.
4.
Remove the tie rod and the ball joint retaining nut and
separate the tie rod and the ball joint from the steering
knuckle.
FE07-0025b
5.
Loosen the steering tie rod adjustment nut and unscrew
the steering tie rod and ball joint.
Installation Procedure:
FE07-0026b
1.
Align the adjustment nut with the mark on the steering tie
rod.
2.
Install the tie rod and the ball joint to the inner steering
horizontal bar.
Steering System
Hydraulic Power Steering System
7-31
FE07-0024b
3.
Install the tie rod and the ball joint to the steering knuckle.
4.
Install the tie rod and the slotted hex nut and tighten.
Torque: 33 Nm (Metric) 24.3 lb-ft (US English)
5.
Install the tie rod ball nut locking pin.
6.
Install the tires.
7.
Carry out the front toe adjustment. Refer to
8.
Tighten the steering bar and the ball joint adjust nut.
Torque: 78 Nm (Metric) 57.5 lb-ft (US English)
7.2.8.12 Power Steering Dust Cover
Replacement
Removal Procedure:
FE07-0027b
1.
Remove the wheels. Refer to
2.
Remove the power steering steering tie rod and the ball
joint. Refer to
3.
Remove the tie rod adjustment nut.
4.
Remove the Power Steering dust cover external retaining
clamp.
FE07-0028b
5.
Remove the power steering dust cover internal retaining
clamp.
6.
Remove the power steering dust cover.
7-32
Hydraulic Power Steering System
Steering System
Installation Procedure:
FE07-0028b
1.
Install the power steering dust cover.
2.
Install the power steering dust cover internal retaining
clamp.
FE07-0027b
3.
Install the power steering dust cover external retaining
clamp.
4.
Install the tie rod adjustment nut.
5.
Install the the power steering steering tie rod and the ball
joint.
6.
Install the wheels.
7.
Carry out the front toe adjustment. Refer to
7.2.8.13 Power Steering Gear Assembly
Replacement
Removal Procedure:
Note
Before the removal, turn off the ignition switch.
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
Steering System
Hydraulic Power Steering System
7-33
FE07-0029b
1.
Disconnect the battery negative cable. Refer to
.
2.
Lift and support the vehicle. Refer to
3.
Remove the wheels. Refer to
4.
Place a recycling container under the steering system to
recycle the power steering fluid.
5.
Disconnect the power steering fluid inlet and outlet pipes
and return pipe from the power steering gear assembly.
FE07-0030b
6.
Turn the steering wheel to align the steering column with
the short axle shell mark.
FE07-0007b
7.
Remove the steering column assembly universal joint
bolt.
7-34
Hydraulic Power Steering System
Steering System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст