Geely EC718, EC718RV, EC715, EC715RV. Manual part — 486
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 486
Standard Voltage: 11-14 V
Yes
No
Step 10
Repair the horn power supply circuit open.
1 2
3
8
7
6
5
4
To I/P Fuse Block 3 Harness
Connector IP10
FE11-6202b
(a)
Repair the open circuit between the horn harness connector
terminal No.1 and the I/P fuse block wiring harness connector
IP10 terminal No.8.
Is horn working properly?
Yes
System normal
No
Step 11
Check the horn ground circuit.
(a)
Disconnect the horn wiring harness connector.
(b)
Measure resistance between the harness connector terminal
No.2 and ground with a multimeter.
Resistance Standard Value: Less than 1 Ω
Yes
No
Step 12
Repair the horn ground circuit open.
(a)
Repair the open circuit.
Is horn working properly?
Yes
System normal
No
Step 13
Replace the horn.
(a)
Confirm the repair completed.
Next
Step 14
System normal.
Body Electric
Horn
11-457
11.13.8 Removal and Installation
11.13.8.1 Horn Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-1110b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the radiator upper grille retaining clips.
FE11-1111b
3.
Disconnect the horn wiring harness connector.
11-458
Horn
Body Electric
FE11-1113b
4.
Remove the horn retaining bolts.
Installation Procedure:
FE11-1113b
1.
Tighten the horn retaining bolts.
Note
Refer to "Fastener Notice" in "Warnings and
Notices".
Torque: 8-11 Nm (Metric) 6-8 lb-ft (US English)
FE11-1114b
2.
Connect the horn wiring harness connector.
3.
Install the radiator upper grille.
4.
Connect the battery negative cable.
Body Electric
Horn
11-459
FE11-1115b
5.
When removing the horn button, please note that the
driver front airbag and the horn button is an integrated
part.
Warning!
For horn and the clock spring removal and
inspection, please strictly abide by the airbag
system safety operation. Refer to "SIR Warning."
11-460
Horn
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст