Geely EC718, EC718RV, EC715, EC715RV. Manual part — 134

FE02-0313b

3.

Remove the front and rear muffler to the rear muffler
retaining nuts and the exhaust pipe gasket.

FE02-0314b

4.

Remove the rubber bearings from the front muffler.

Note

Do not drop the front muffler during the removal.

5.

Remove the front muffler.

6.

Check whether the three-way catalytic muffler has holes,
damage and cracks.

Installation Procedure:

FE02-0310b

1.

Install the exhaust pipe gasket between the front muffler
and the three-way catalytic converter.

2.

Install and tighten the front muffler to the three-way
catalytic converter retaining nuts.

Torque: 52 Nm (Metric) 38.4 lb-ft (US English)

Engine

Exhaust System JL4G18-D

2-451

FE02-0315b

3.

Install the front muffler gasket.

4.

Install and tighten the front and rear muffler retaining nuts.

Torque: 52 Nm (Metric) 38.4 lb-ft (US English)

FE02-0314b

5.

Install the rubber bearings on both sides of the front
muffler.

6.

Lower the vehicle.

7.

Inspect the exhaust system leaks.

2.7.6.4 Rear Muffler Replacement

Removal Procedure:

Warning!

Refer to "Vehicle Lifting Warning" in "Warnings and
Notices".

Warning!

Do not carry out the removal procedure, as this may
result in burns.

2-452

Exhaust System JL4G18-D

Engine

FE02-0313b

1.

Lift the vehicle.

2.

Remove the rear muffler to front muffler retaining nuts and
the exhaust pipe gasket.

1

FE02-0316b

3.

Remove the rear rubber bearing (1).

2

FE02-0317b

4.

Remove the rear rubber bearing (2).

5.

Remove rear muffler

6.

Check whether there are holes, damage or cracks.

Engine

Exhaust System JL4G18-D

2-453

Installation Procedure:

2

FE02-0317b

1.

Install the rear rubber bearing (2).

1

FE02-0316b

2.

Install the rear rubber bearing (1).

FE02-0315b

3.

Install the exhaust pipe gasket.

4.

Install the rear muffler to front muffler retaining nuts.

Torque: 52 Nm (Metric) 38.4 lb-ft (US English)

5.

Lower the vehicle.

6.

Inspect the exhaust system leaks.

2-454

Exhaust System JL4G18-D

Engine