Geely EC718, EC718RV, EC715, EC715RV. Manual part — 92
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 92
Symptoms
Suspect Part
Refer to Page
3. Anti-theft Module
4. ECM
5. Instrument Cluster
6. Wiring Harness Connector
Anti-theft system can not detect the valid key.
1. Anti-theft Coil
-
2. Anti-theft Module
-
Keys do not match
1. Anti-theft Coil
-
2. Anti-theft Module
-
3. Key
-
ECM always detects Anti-theft malfunction
1. Wiring Harness and
Connector
theft Warning Lamp Flashing,
Vehicle Can Not Start
.
2. Anti-theft Module
3. ECM
2.5.7.7 Replaced Key Programming
Note
Engine Anti-theft Warning Lamp Flashing, Vehicle Can Not Start.
Step 1
Insert a new key.
Next
Step 2
Turn the ignition switch to "ON" position.
Next
Step 3
Enter into the anti-theft system.
FE02-7002b
Engine
Engine Anti-theft System JL4G18-D
2-283
Next
Note
Before enter the security code please contact the manufacturers technical department, as the Anti-theft computer will
be locked after the wrong security code entered seven consecutive times.
Step 4
Enter the security code.
Next
Step 5
Learn the key.
Next
Step 6
Key programming.
Next
Step 7
Place the ignition switch at "OFF" position and wait about 5 min or so.
Next
Step 8
New key learn successful.
2.5.7.8 Ignition Key Erase
Step 1
Insert a new key.
Next
Step 2
Turn the ignition switch to "ON" position.
Next
Step 3
Enter into the anti-theft system.
FE02-7002b
2-284
Engine Anti-theft System JL4G18-D
Engine
Next
Step 4
Enter the security code.
Next
Step 5
Erase the key: select the recorded key location and erase. If you select all, all the keys will be removed.
Next
Step 6
Place the ignition switch at "OFF" position and wait about 5min or so.
Next
Step 7
Key erase successful .
2.5.7.9 Replaced Security Module Programming
Step 1
Insert a new key.
Next
Step 2
Turn the ignition switch to "ON" position.
Next
Step 3
Enter into the anti-theft system.
FE02-7002b
Next
Step 4
Set security code.
Next
Step 5
Enter the security code (preset the four-digit security code).
Engine
Engine Anti-theft System JL4G18-D
2-285
Next
Step 6
Read the security module from ECM.
Next
Step 7
.
2.5.7.10 Replaced ECM Programming
Step 1
Insert a new key.
Next
Step 2
Turn the ignition switch to "ON" position.
Next
Step 3
Enter into the anti-theft system.
FE02-7002b
Next
Step 4
Enter the security code.
Next
Step 5
Read the anti-theft module
to ECM.
2.5.7.11 Replaced Anti-theft Module and ECM Programming
Step 1
Insert a new key.
Next
Step 2
Turn the ignition switch to "ON" position.
2-286
Engine Anti-theft System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст