Geely EC718, EC718RV, EC715, EC715RV. Manual part — 238
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 238
FE02-8003b
4.
Remove the ignition coil bolts and remove the ignition coil.
Installation Procedure:
FE02-8004b
1.
Install the ignition coil and tighten retaining bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
FE02-8005b
2.
Connect the ignition coil harness connector.
Engine
Ignition System JL4G15-D
2-867
4
1
3
2
FE02-8006b
3.
Connect high-voltage damping line according to the
number of labels on the ignition coil.
FE02-8001b
4.
Connect high-voltage damping line.
5.
Connect the battery negative cable.
2.20.5.3
High-voltage
Damping
Line
Replacement
Removal Procedure:
Warning!
Warning: Refer to "Battery Disconnection Warning" in
"Warnings and Notices".
2-868
Ignition System JL4G15-D
Engine
FE02-8043b
1.
Disconnect the battery negative cable. Refer to
.
2.
Disconnect high-voltage damping line from the ignition
coil.
FE02-8008b
3.
Unplug the high-voltage damping line and remove from
the high-voltage wire mount.
Installation Procedure:
FE02-8009b
1.
Install the high-voltage damping line to the engine.
Engine
Ignition System JL4G15-D
2-869
FE02-8001b
2.
Connect the high-voltage damping line to the ignition coil.
4
1
3
2
FE02-8006b
3.
Connect high-voltage damping line according to the
number of labels on the ignition coil.
FE02-8011b
4.
As shown in graphic, fix the high-voltage damping line on
the mount in order to avoid high-voltage damping line
interference with each other.
5.
Connect the battery negative cable.
2-870
Ignition System JL4G15-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст