Geely EC718, EC718RV, EC715, EC715RV. Manual part — 223
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 223
2.13.2 Removal and Installation
2.13.2.1 Fuel Injector Replacement
Removal Procedure:
Warning!
Warning: Refer to "Battery Disconnection Warning" in
"Warnings and Notices"
FE02-8023b
1.
Release fuel system pressure. Refer to
2.
Disconnect the battery negative cable. Refer to
.
3.
Remove the hood. Refer to
4.
Disconnect the crankcase ventilation tube from the
cylinder head cover.
FE02-8024b
5.
Disconnect the engine fuel injector harness connector.
Note
Pull up the gray self-locking device, and then press
to Disconnect the connector.
Engine
Fuel System JL4G15-D
2-807
FE02-8025b
6.
Remove the fuel pipe form fuel rail.
FE02-8026b
7.
Remove the fuel rail retaining bolts and remove the fuel
rail.
FE02-0028b
8.
Remove fuel injectors spring and unplug the fuel injectors.
2-808
Fuel System JL4G15-D
Engine
Installation Procedure:
FE02-0030b
1.
Apply a small amount of engine oil to lubricate the fuel
injector O-ring.
2.
Install the fuel injectors to the fuel rail.
Note
Fuel injectors terminal should face outward.
FE02-0028b
3.
Install fuel injectors springs, make sure that the fuel
injector wiring harness connector port and the fuel rail
mounting hole are in the same direction.
FE02-8026b
4.
Install the fuel rail and tighten the retaining bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
Engine
Fuel System JL4G15-D
2-809
FE02-8025b
5.
Connect the fuel pipe into fuel rail.
Note
Fuel pipe must be inserted into the fuel rail after the
second boss and then tighten.
FE02-8027b
6.
Connect engine fuel injector wiring harness connector.
FE02-8023b
7.
Connect crankcase ventilation tube.
8.
Connect the battery negative cable.
2-810
Fuel System JL4G15-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст