Lexus UX (2022 year). Manual in english — page 22
386
6-3. Do-it-yourself maintenance
displayed, have the vehicle inspected by
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
The tire pressure warning valve and
transmitter is equipped with a unique
ID code. When replacing a tire pres-
sure warning valve and transmitter, it is
necessary to register the ID code.
When registering the ID codes, per-
form the following procedure.
1
Park the vehicle in a safe place, wait
for approximately 20 minutes, and
then start the hybrid system.
(
P.184)
2
Press
or
of the meter con-
trol switches and select
.
3
Press
or
of the meter con-
trol switches and select “Vehicle
Settings”, and then press “OK”.
4
Press
or
of the meter con-
trol switches and select “TPWS”,
and then press “OK”.
5
Press
or
of the meter con-
trol switches and select “Change
Wheel Set”, and then press and
hold “OK” until the tire pressure
warning light starts slowly blinking
3 times.
The change wheel set mode is activated
and registration is started.
A message is displayed on the multi-infor-
mation display, and “--” is displayed for
inflation pressure of each tire. Then, the tire
pressure warning light blinks rapidly for
approximately 1 minute and stays on.
6
Drive at approximately 40 km/h
(25 mph) or more for approxi-
mately 10 to 30 minutes.
Registration is complete when the tire
pressure warning light turns off and the
inflation pressure of each tire is displayed
on the multi-information display.
Even if the vehicle is not driven at approxi-
mately 40 km/h (25 mph) or more, regis-
tration can be completed by driving for a
long time. However, if registration does
not complete after driving for 1 hour or
more, perform the procedure again from
the beginning.
7
Initialize the tire pressure warning
system. (
P.384)
Q
When registering ID codes
O
ID code registration is performed while
driving at a vehicle speed of approxi-
mately 40 km/h (25 mph) or more.
WARNING
Q
When initializing the tire pressure
warning system
Do not initialize tire inflation pressure
without first adjusting the tire inflation
pressure to the specified level. Other-
wise, the tire pressure warning light may
not come on even if the tire inflation
pressure is low, or it may come on when
the tire inflation pressure is actually nor-
mal.
Registering ID codes
387
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
O
Before performing ID code registration,
make sure that no wheels with tire pres-
sure warning valve and transmitters
installed are near the vehicle.
O
Make sure to initialize the tire pressure
warning system after registering the ID
codes. If the system is initialized before
registering the ID codes, the initialized
values will be invalid.
O
ID codes can be registered by yourself,
but depending on the driving conditions
and driving environment, registration
may take some time to complete.
Q
Canceling ID code registration
O
To cancel ID code registration after it has
been started, turn the power switch off
before driving the vehicle. If the vehicle is
driven after ID code registration is
started, to cancel registration, perform
the ID code registration start procedure
again and turn the power switch off
before driving.
O
If ID code registration has been can-
celed, the tire pressure warning light will
blink for approximately 1 minute when the
power switch is turned to ON and then
illuminate. The tire pressure warning sys-
tem will be operational when the tire
pressure warning light turns off.
O
If the warning light does not turn off even
after several minutes have elapsed, ID
code registration may not have been
canceled correctly. To cancel registra-
tion, perform the ID code registration
start procedure again and then turn the
power switch off before driving.
Q
If ID codes are not registered properly
O
In the following situations, ID code regis-
tration may take longer than usual to be
completed or may not be possible. Nor-
mally, registration completes within
approximately 30 minutes.
• Vehicle is not parked for approximately
20 minutes or more before driving
• Vehicle is not driven at approximately 40
km/h (25 mph) or more
• Vehicle is driven on unpaved roads
• Vehicle is driven near other vehicles and
system cannot recognize tire pressure
warning valves and transmitters of your
vehicle over those of other vehicles
• Wheel with tire pressure warning valve
and transmitter installed is inside or near
the vehicle
If registration does not complete after driv-
ing for 1 hour or more, perform the ID code
registration procedure again from the
beginning.
O
If the vehicle is reversed during registra-
tion, the data up to that point is reset, so
perform the registration procedure again
from the beginning.
O
In the following situations, ID code regis-
tration will not be started or was not com-
pleted properly and the system will not
operate properly. Perform the ID code
registration procedure again.
• If, when attempting to start ID code regis-
tration, the tire pressure warning light
does not blink slowly 3 times.
• If, when the vehicle has been driven for
about 20 minutes after performing ID
code registration, the tire pressure warn-
ing light blinks for approximately 1 minute
and then illuminates.
O
If ID code registration cannot be com-
pleted after performing the above proce-
dure, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
388
6-3. Do-it-yourself maintenance
Q
Effects of incorrect tire inflation pres-
sure
Driving with incorrect tire inflation pressure
may result in the following:
O
Reduced fuel economy
O
Reduced driving comfort and poor han-
dling
O
Reduced tire life due to wear
O
Reduced safety
O
Damage to the drive train
If a tire needs frequent inflating, have it
checked by any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
Q
Instructions for checking tire inflation
pressure
When checking tire inflation pressure,
observe the following:
O
Check only when the tires are cold.
If your vehicle has been parked for at
least 3 hours or has not been driven for
more than 1.5 km or 1 mile, you will get an
accurate cold tire inflation pressure read-
ing.
O
Always use a tire pressure gauge.
It is difficult to judge if a tire is properly
inflated based only on its appearance.
O
It is normal for the tire inflation pressure
to be higher after driving as heat is gener-
ated in the tire. Do not reduce tire infla-
tion pressure after driving.
O
Passengers and luggage weight should
be placed so that the vehicle is balanced.
Tire inflation pressure
Make sure to maintain proper tire
inflation pressure. Tire inflation
pressure should be checked at
least once per month. However,
Lexus recommends that tire infla-
tion pressure be checked once
every two weeks.
WARNING
Q
Proper inflation is critical to save tire
performance
Keep your tires properly inflated.
If the tires are not properly inflated, the
following conditions may occur which
could lead to an accident resulting in
death or serious injury:
O
Excessive wear
O
Uneven wear
O
Poor handling
O
Possibility of blowouts resulting from
overheated tires
O
Air leaking from between tire and
wheel
O
Wheel deformation and/or tire dam-
age
O
Greater possibility of tire damage
while driving (due to road hazards,
expansion joints, sharp edges in the
road, etc.)
NOTICE
Q
When inspecting and adjusting tire
inflation pressure
Be sure to put the tire valve caps back
on.
If a valve cap is not installed, dirt or mois-
ture may get into the valve and cause an
air leak, resulting in decreased tire infla-
tion pressure.
389
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
When replacing wheels, care should
be taken to ensure that they are equiv-
alent to those removed in load capac-
ity, diameter, rim width and inset
*
.
Replacement wheels are available at
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
*
: Conventionally referred to as offset.
Lexus does not recommend using the
following:
Wheels of different sizes or types
Used wheels
Bent wheels that have been
straightened
Q
When replacing wheels
The wheels of your vehicle are equipped
with tire pressure warning valves and trans-
mitters that allow the tire pressure warning
system to provide advance warning in the
event of a loss in tire inflation pressure.
Whenever wheels are replaced, tire pres-
sure warning valves and transmitters must
be installed. (
P.383)
Use only Lexus wheel nuts and
wrenches designed for use with
your aluminum wheels.
When rotating, repairing or chang-
Wheels
If a wheel is bent, cracked or heav-
ily corroded, it should be replaced.
Otherwise, the tire may separate
from the wheel or cause a loss of
handling control.
Wheel selection
WARNING
Q
When replacing wheels
O
Do not use wheels that are a different
size from those recommended in the
loss of handling control.
O
Never use an inner tube in a leaking
wheel which is designed for a tubeless
tire. Doing so may result in an acci-
dent, causing death or serious injury.
Q
Use of defective wheels prohibited
Do not use cracked or deformed wheels.
Doing so could cause the tire to leak air
during driving, possibly causing an acci-
dent.
NOTICE
Q
Replacing tire pressure warning
valves and transmitters
O
Because tire repair or replacement
may affect the tire pressure warning
valves and transmitters, make sure to
have tires serviced by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer or
other qualified service shop. In addi-
tion, make sure to purchase your tire
pressure warning valves and transmit-
ters at any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer.
O
Ensure that only genuine Lexus wheels
are used on your vehicle.
Tire pressure warning valves and
transmitters may not work properly
with non-genuine wheels.
Aluminum wheel precautions
390
6-3. Do-it-yourself maintenance
ing your tires, check that the wheel
nuts are still tight after driving 1600
km (1000 miles).
Be careful not to damage the alumi-
num wheels when using tire chains.
Use only Lexus genuine balance
weights or equivalent and a plastic
or rubber hammer when balancing
your wheels.
1
Turn the power switch off.
2
Open the glove box. Remove the
partition. (
P.342)
3
Remove the panel.
4
Unlock the filter cover (
), pull
the filter cover out of the claws
(
), and remove the filter cover.
Air conditioning filter
The air conditioning filter must be
changed regularly to maintain air
conditioning efficiency.
Removing the air conditioning
filter
A
B
391
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
5
Remove the filter case.
6
Remove the air conditioning filter
from the filter case and replace it
with a new one.
The “
UP” marks shown on the filter and
the filter case should be pointing up.
Q
Checking interval
Inspect and replace the air conditioning fil-
ter according to the maintenance schedule.
In dusty areas or areas with heavy traffic
flow, early replacement may be required.
(For scheduled maintenance information,
please refer to the “Lexus Service Booklet”
or “Lexus Warranty Booklet”.)
Q
If air flow from the vents decreases dra-
matically
The filter may be clogged. Check the filter
and replace if necessary.
Q
Air conditioning filter with deodorizing
function
When fragrances are placed in your vehi-
cle, the deodorizing effect may become sig-
nificantly weakened in a short period.
When an air conditioning odor comes out
continuously, replace the air conditioning
filter.
NOTICE
Q
When using the air conditioning sys-
tem
Make sure that a filter is always installed.
Using the air conditioning system with-
out a filter may cause damage to the sys-
tem.
Q
To prevent damage to the filter cover
When moving the filter cover in the
direction of arrow to release the fitting,
pay attention not to apply excessive
force to the claws. Otherwise, the claws
may be damaged.
392
6-3. Do-it-yourself maintenance
Remove the dust from the air intake
vent with a vacuum cleaner etc.
Make sure to only use a vacuum to suck
out dust and clogs. Attempting to blow out
dust and clogs using an airgun etc. may
push it into the air intake vent.
If dust and clogs cannot be completely
removed with the air intake vent cover
installed, remove the cover and clean
the filter.
1
Turn the power switch off.
2
Using a Phillips screwdriver,
remove the clip.
3
Remove the air intake vent cover.
1
Pull the cover as shown in the illus-
tration to disengage the 5 claws,
starting from the claw in the upper
right corner.
2
Pull the cover toward the front of
the vehicle to remove it.
Cleaning the hybrid battery
(traction battery) air intake
vent and filter
To prevent the fuel economy from
being affected, visually inspect the
hybrid battery (traction battery) air
intake vent periodically for dust and
clogs. If it is dusty or clogged or if
“Maintenance required for Trac-
tion battery cooling parts See
owner’s manual” is shown on the
multi-information display, clean the
air intake vent using the following
procedures:
Cleaning the air intake vent
If dust and clogs cannot be com-
pletely removed
393
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
4
Remove the air intake vent filter.
1
Disengage the 1 claw as shown in
the illustration.
2
Remove the filter from the cover.
5
Remove the dust and clogs from
the filter using a vacuum cleaner
etc.
Make sure to also remove the dust and
clogs from the inside of the air intake vent
cover.
6
Reinstall the filter to the cover.
1
Engage the filter to the 2 claws as
shown in the illustration.
2
Engage the 1 claw to install the fil-
ter.
Make sure that the filter is not crooked or
deformed when installing it.
7
Install the air intake vent cover.
1
Insert the tab of the cover as shown
in the illustration.
2
Push the cover to engage the 5
claws.
8
Using a Phillips screwdriver, install
the clip.
Q
Scheduled maintenance of the air
intake vent is necessary when
In some situations such as when the vehicle
is used frequently or in heavy traffic or dusty
areas, the air intake vent may need to be
cleaned more regularly. For details, refer to
the “Lexus Service Booklet” or “Lexus War-
ranty Booklet”.
Q
Cleaning the air intake vent
O
Dust in the air intake vent may interfere
with the cooling of the hybrid battery
394
6-3. Do-it-yourself maintenance
(traction battery). If charging/discharg-
ing of the hybrid battery (traction battery)
becomes limited, the distance that the
vehicle can be driven using the electric
motor (traction motor) may be reduced
and the fuel economy may be reduced.
Inspect and clean the air intake vent peri-
odically.
O
Improper handling of the air intake vent
cover and filter may result in damage to
them. If you have any concerns about
cleaning the filter, contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Q
If “Maintenance required for Traction
battery cooling parts See owner’s man-
ual” is shown on the multi-information
display
O
If this warning message is shown on the
multi-information display, remove the air
intake vent cover and clean the filter.
(
P.392)
O
After cleaning the air intake vent, start
the hybrid system and check that the
warning message is no longer shown. It
may take approximately 20 minutes after
the hybrid system is started until the
warning message disappears. If the warn-
ing message does not disappear, have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
WARNING
Q
When cleaning the air intake vent
O
Do not use water or other liquids to
clean the air intake vent. If water is
applied to the hybrid battery (traction
battery) or other components, a mal-
function or fire may occur.
O
Before cleaning the air intake vent,
make sure to turn the power switch off
to stop the hybrid system.
Q
When removing the air intake vent
cover
Do not touch the service plug located
near the air intake vent. (
P.82)
NOTICE
Q
When cleaning the air intake vent
When cleaning the air intake vent, make
sure to only use a vacuum to suck out
dust and clogs. If a compressed air blow
gun, etc. is used to blow out dust and
clogs, the dust or clogs may be pushed
into the air intake vent, which may affect
the performance of the hybrid battery
(traction battery) and cause a malfunc-
tion.
Q
To prevent damage to the vehicle
O
Do not allow water or foreign matter
to enter the air intake vent when the
cover is removed.
O
Carefully handle the removed filter so
that it will not be damaged. If the filter
is damaged, have it replaced with a
new filter by any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer.
O
Make sure to reinstall the filter and
cover to their original positions after
cleaning.
O
Do not install anything to the air intake
vent other than the exclusive filter for
this vehicle or use the vehicle without
the filter installed.
395
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
Q
If the electronic key battery is depleted
The following symptoms may occur:
O
The smart entry & start system and wire-
less remote control will not function
properly.
O
The operational range will be reduced.
Q
When the card key battery needs to be
replaced (if equipped)
The battery for the card key is available only
at Lexus dealers. Your Lexus dealer can
replace the battery for you.
Prepare the following before replacing
the battery:
Flathead screwdriver
Small flathead screwdriver
Lithium battery CR2032
Q
Use a CR2032 lithium battery
O
Batteries can be purchased at any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer, local
electrical appliance shops or camera
stores.
O
Replace only with the same or equivalent
type recommended by the manufacturer.
O
Dispose of used batteries according to
the local laws.
NOTICE
Q
If “Maintenance required for Trac-
tion battery cooling parts See
owner’s manual” is shown on the
multi-information display
If the vehicle is continuously driven with
the warning message (indicating that
charging/discharging of the hybrid bat-
tery [traction battery] may become lim-
ited) displayed, the hybrid battery
(traction battery) may malfunction. If the
warning message is shown, clean the air
intake vent immediately.
Electronic key battery
Replace the battery with a new one
if it is depleted.
Items to prepare
396
6-3. Do-it-yourself maintenance
1
Take out the mechanical key.
2
Remove the cover.
3
Remove the battery cover.
4
Remove the depleted battery using
the small flathead screwdriver.
Insert a new battery with the “+” terminal
facing up.
Replacing the battery
WARNING
Q
Battery precautions
Observe the following precautions.
Failure to do so may result in death or
serious injury.
O
Do not swallow the battery. Doing so
may cause chemical burns.
O
A coin battery or button battery is
used in the electronic key. If a battery
is swallowed, it may cause severe
chemical burns in as little as 2 hours
and may result in death or serious
injury.
O
Keep away new and removed batter-
ies from children.
O
If the cover cannot be firmly closed,
stop using the electronic key and stow
the key in the place where children
cannot reach, and then contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
O
If you accidentally swallow a battery or
put a battery into a part of your body,
get emergency medical attention
immediately.
Q
To prevent battery explosion or leak-
age of flammable liquid or gas
O
Replace the battery with a new battery
of the same type. If a wrong type of
battery is used, it may explode.
397
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
1
Turn the power switch off.
2
Open the fuse box cover.
Engine compartment: type A fuse
box
Push the tab in and lift the lid off.
Engine compartment: type B fuse
box
Push the tab in and lift the lid off.
WARNING
O
Do not expose batteries to extremely
low pressure due to high altitude or
extremely high temperatures.
O
Do not burn, break or cut a battery.
Q
Certification for the electronic key
battery
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE
INSTRUCTIONS.
NOTICE
Q
When replacing the battery
Use a screwdriver of appropriate size.
Applying excessive force may deform or
damage the cover.
Q
For normal operation after replacing
the battery
Observe the following precautions to
prevent accidents:
O
Always work with dry hands.
Moisture may cause the battery to
rust.
O
Do not touch or move any other com-
ponent inside the remote control.
O
Do not bend either of the battery ter-
minals.
Checking and replacing
fuses
If any of the electrical components
do not operate, a fuse may have
blown. If this happens, check and
replace the fuses as necessary.
Checking and replacing fuses
398
6-3. Do-it-yourself maintenance
Left side instrument panel (left-hand
drive vehicles)
Remove the lid.
Left side instrument panel (right-
hand drive vehicles)
Remove the cover
and then remove
the connector
.
Remove the lid.
Luggage compartment
Remove the 12-volt battery cover
(
P.378) and push the tab in and lift the
lid off.
3
Remove the fuse.
Only type A fuse can be removed using
the pullout tool.
4
Check if the fuse is blown.
Replace the blown fuse with a new fuse of
an appropriate amperage rating. The
amperage rating can be found on the fuse
box lid.
A
B
399
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
Type A
Normal fuse
Blown fuse
Type B
Normal fuse
Blown fuse
Type C
Normal fuse
Blown fuse
Type D
Normal fuse
Blown fuse
Q
After a fuse is replaced
O
When installing the lid, make sure that the
tab is installed securely.
O
If the lights do not turn on even after the
fuse has been replaced, a bulb may need
replacement.
O
If the replaced fuse blows again, have the
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Q
If there is an overload in a circuit
The fuses are designed to blow, protecting
the wiring harness from damage.
Q
When replacing light bulbs
Lexus recommends that you use genuine
Lexus products designed for this vehicle.
Because certain bulbs are connected to cir-
cuits designed to prevent overload, non-
genuine parts or parts not designed for this
vehicle may be unusable.
A
B
A
B
A
B
A
B
400
6-3. Do-it-yourself maintenance
Front turn signal light (vehicles with
single-beam headlights)
Q
Bulbs that need to be replaced by
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer
Headlights
Front position lights and daytime
running lights
Front turn signal lights (vehicles with
WARNING
Q
To prevent system breakdowns and
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
O
Never use a fuse of a higher amperage
rating than that indicated, or use any
other object in place of a fuse.
O
Always use a genuine Lexus fuse or
equivalent.
Never replace a fuse with a wire, even
as a temporary fix.
O
Do not modify the fuses or fuse boxes.
Q
Fuse box near the power control unit
Never check or replace the fuses as
there are high voltage parts and wiring
near the fuse box.
Doing so may cause electric shock,
resulting in death or serious injury.
NOTICE
Q
Before replacing fuses
Have the cause of electrical overload
determined and repaired by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer as soon
as possible.
Light bulbs
You may replace the following
bulbs by yourself. Before replacing,
check the wattage of the light bulb
to be replaced. As there is a danger
that components may be damaged,
we recommend that replacement is
carried out by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Bulb location
A
401
6
6-3. Do-it-yourself maintenance
M
ain
ten
an
ce a
nd
ca
re
triple-beam headlights)
Front fog lights (if equipped)
Cornering lights (if equipped)
Side turn signal lights
Tail lights
Stop lights
Tail lights/stop lights
Rear turn signal lights
Rear fog lights
Back-up lights
High mounted stoplight
License plate lights
Q
LED lights
Vehicles with single-beam headlights: The
lights other than the front turn signal light
each consist of a number of LEDs. If any of
the LEDs burn out, take your vehicle to any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer to
have the light replaced.
Vehicles with triple-beam headlights: The
lights consist of a number of LEDs. If any of
the LEDs burn out, take your vehicle to any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer to
have the light replaced.
Q
Condensation build-up on the inside of
the lens
Temporary condensation build-up on the
inside of the headlight lens does not indi-
cate a malfunction. Contact any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer for more informa-
tion in the following situations:
O
Large drops of water have built up on the
inside of the lens.
O
Water has built up inside the headlight.
Q
When replacing light bulbs
P.399
Q
Front turn signal lights (vehicles
with single-beam headlights)
1
Turn the bulb base counterclock-
wise.
2
Remove the light bulb.
3
When installing, reverse the steps
listed.
Replacing light bulb
WARNING
Q
Replacing light bulb
O
Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст