Lexus UX 300e (2022 year). Manual in english — page 27
457
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
Q
AC charging port lid
1
Remove the cover inside the lug-
gage compartment by inserting a
flathead screwdriver.
When removing the cover, to prevent
damage, cover the tip of the screwdriver
with a rag.
2
Pull the lever (white).
If you lose your keys
New genuine mechanical keys can
be made by any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer
using another mechanical key and
the key number stamped on your
key number plate. Keep the plate in
a safe place such as your wallet, not
in the vehicle.
NOTICE
Q
When an electronic key is lost
If the electronic key remains lost, the risk
of vehicle theft increases significantly.
Visit any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer immediately with all
remaining electronic keys and the card
key (if equipped) that were provided with
your vehicle.
If the charging port lids can-
not be opened
If the charging port lids cannot be
opened when using the normal pro-
cedure, the following procedure
can be used to open the charging
port lids.
Opening the charging port lids
458
8-2. Steps to take in an emergency
Q
DC charging port lid
1
Remove the cover inside the lug-
gage compartment by inserting a
flathead screwdriver.
When removing the cover, to prevent
damage, cover the tip of the screwdriver
with a rag.
2
Pull the lever (black).
Q
When the electronic key does not work
properly
O
Make sure that the smart entry & start
system has not been deactivated using
the Remote Touch or at any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer. If it is
off, turn the function on.
O
Check if battery-saving mode is set. If it is
set, cancel the function. (
P.197)
Q
Unlocking the driver’s door
Use the mechanical key to perform the
following operations. (
P.176)
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (
P.197) or the electronic
key cannot be used because the
battery is depleted, the smart entry
& start system and wireless remote
control cannot be used. In such
cases, the doors can be opened and
the EV system can be started by fol-
lowing the procedure below.
NOTICE
Q
In case of a smart entry & start system
malfunction or other key-related
problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
Locking and unlocking the
driver’s door
459
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
1
Insert the mechanical key while
pulling on the driver’s door handle.
2
Unlock the door.
3
Remove the key, return the handle,
and then pull the handle again.
Q
Locking the driver’s door
1
With the door open, push down the
inside lock button.
2
Close the door while pulling the
door handle.
Q
Key linked functions
The opening and closing of the power win-
dows and moon roof (if equipped) can be
linked to key operation by a customized
setting.
1
Closes the windows and moon roof
(turn and hold)
2
Opens the windows and moon roof
(turn and hold)
WARNING
Q
When using the mechanical key and
operating the power windows or
moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof.
Also, do not allow children to operate the
wireless remote control or mechanical
key. It is possible for children and other
passengers to get caught in the power
window or moon roof.
460
8-2. Steps to take in an emergency
1
Depress the brake pedal.
2
Touch the Lexus emblem side of
the electronic key to the power
switch.
When the electronic key is detected, a
buzzer sounds and the power switch will
turn to ON.
When the smart entry & start system is
deactivated in customization setting, the
power switch will turn to ACC.
3
Firmly depress the brake pedal and
check that
is shown on the
multi-information display.
4
Press the power switch.
In the event that the EV system still cannot
be started, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
Q
Stopping the EV system
Set the parking brake, shift the shift position
to P and press the power switch as you nor-
mally do when stopping the EV system.
Q
Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (
P.414)
Q
Alarm (if equipped)
Using the mechanical key to lock the doors
will not set the alarm system.
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered. (
P.73)
Q
Changing power switch modes
Release the brake pedal and press the
power switch in step
3
above.
The EV system does not start and modes
will be changed each time the switch is
pressed. (
P.227)
Starting the EV system
461
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
If you have a set of jumper (or booster)
cables and a second vehicle with a 12-
volt battery, you can jump start your
vehicle by following the steps below.
1
Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and the doors may
lock. (
P.74)
2
Open the hood (
P.389).
3
Open the positive (+) battery ter-
minal cover while pushing the side
of the cover as shown in the illustra-
tion.
If the 12-volt battery is dis-
charged
The following procedures may be
used to start the EV system if the
vehicle’s 12-volt battery is dis-
charged.
You can also call any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Restarting the EV system
462
8-2. Steps to take in an emergency
4
Connect a positive jumper cable clamp to
on your vehicle and connect the
clamp on the other end of the positive cable to
on the second vehicle. Then,
connect a negative cable clamp to
on the second vehicle and connect the
clamp at the other end of the negative cable to
.
Positive (+) battery terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Solid, stationary, unpainted metallic point away from the battery and any mov-
ing parts as shown in the illustration
5
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
6
Open and close any of the doors of
your vehicle with the power switch
OFF.
7
Maintain the engine speed of the
second vehicle and start the EV
system of your vehicle by turning
the power switch to ON.
8
Make sure the “READY” indicator
comes on. If the indicator light does
not come on, contact any autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable
repairer.
9
Once the EV system has started,
remove the jumper cables in the
exact reverse order from which
they were connected.
Once the EV system starts, have the
vehicle inspected at any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer as
A
B
C
D
A
B
C
D
463
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
soon as possible.
Q
Starting the EV system when the 12-volt
battery is discharged
The EV system cannot be started by push-
starting.
Q
To prevent 12-volt battery discharge
O
Turn off the headlights, the air condition-
ing system, the audio system, etc. while
the EV system is off.
O
Turn off any unnecessary electrical com-
ponents when the vehicle is running at a
low speed for an extended period, such
as in heavy traffic.
Q
Charging the 12-volt battery
The electricity stored in the 12-volt battery
will discharge gradually even when the
vehicle is not in use, due to natural dis-
charge and the draining effects of certain
electrical appliances. If the vehicle is left for
a long time, the 12-volt battery may dis-
charge, and the EV system may be unable
to start. (The 12-volt battery recharges
automatically while the EV system is oper-
ating.)
Q
When the 12-volt battery is removed or
discharged
O
Information stored in the ECU is cleared.
When the 12-volt battery is depleted,
have the vehicle inspected at any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
O
In some cases, it may not be possible to
unlock the doors using the smart entry &
start system when the 12-volt battery is
discharged. Use the wireless remote
control or the mechanical key to lock or
unlock the doors.
O
The EV system may not start on the first
attempt after the 12-volt battery has
recharged but will start normally after the
second attempt. This is not a malfunction.
O
The power switch mode is memorized by
the vehicle. When the 12-volt battery is
reconnected, the system will return to the
mode it was in before the 12-volt battery
was discharged. Before disconnecting
the 12-volt battery, turn the power switch
off.
If you are unsure what mode the power
switch was in before the 12-volt battery
discharged, be especially careful when
reconnecting the 12-volt battery.
O
If the 12-volt battery discharges, it may
not be possible to shift the shift position to
other positions. In this case, the vehicle
cannot be towed without lifting both front
wheels because the front wheels will be
locked. (
P.428)
O
The power back door (if equipped) must
be initialized. (
P.190)
Q
When replacing the 12-volt battery
O
Use a 12-volt battery that conforms to
European regulations.
O
Use a 12-volt battery that the case size is
same as the previous one (LN0), 20
hour rate capacity (20HR) is equivalent
(35Ah) or greater, and performance rat-
ing (CCA) is equivalent (240A) or
greater.
• If the sizes differ, the 12-volt battery can-
not be properly secured.
• If an improper 12-volt battery is used, bat-
tery performance may decrease and the
EV system may not be able to restart.
• If the 20 hour rate capacity is low, even if
the time period where the vehicle is not
used is a short time, the 12-volt battery
may discharge and EV system may not
be able to start.
For details, consult with at any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer as soon as possible.
WARNING
Q
When removing the 12-volt battery
terminals
Always remove the negative (-) terminal
first. If the positive (+) terminal contacts
any metal in the surrounding area when
the positive (+) terminal is removed, a
spark may occur, leading to a fire in addi-
tion to electrical shocks and death or
serious injury.
464
8-2. Steps to take in an emergency
WARNING
Q
Avoiding 12-volt battery fires or
explosions
Observe the following precautions to
prevent accidentally igniting the flamma-
ble gas that may be emitted from the 12-
volt battery:
O
Make sure each jumper cable is con-
nected to the correct terminal and that
it is not unintentionally in contact with
any other than the intended terminal.
O
Do not allow the other end of the
jumper cable connected to the “+” ter-
minal to come into contact with any
other parts or metal surfaces in the
area, such as brackets or unpainted
metal.
O
Do not allow the + and - clamps of the
jumper cables to come into contact
with each other.
O
Do not smoke, use matches, cigarette
lighters or allow open flame near the
12-volt battery.
Q
12-volt battery precautions
The 12-volt battery contains poisonous
and corrosive acidic electrolyte, while
related parts contain lead and lead com-
pounds. Observe the following precau-
tions when handling the 12-volt battery:
O
When working with the 12-volt battery,
always wear safety glasses and take
care not to allow any battery fluids
(acid) to come into contact with skin,
clothing or the vehicle body.
O
Do not lean over the 12-volt battery.
O
In the event that battery fluid (acid)
comes into contact with the skin or
eyes, immediately wash the affected
area with water and seek medical
attention.
Place a wet sponge or cloth over the
affected area until medical attention
can be received.
O
Always wash your hands after han-
dling the 12-volt battery and other bat-
tery-related parts.
O
Do not allow children near the 12-volt
battery.
Q
When replacing the 12-volt battery
O
When the vent plug is close to the hold
down clamp, the battery fluid (acid)
may leak.
O
For information regarding battery
replacement, contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
NOTICE
Q
When handling jumper cables
When connecting the jumper cables,
ensure that they do not become entan-
gled in the cooling fans.
465
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
1
Stop the vehicle in a safe place and
turn off the air conditioning system.
2
Leave the EV system operating and
carefully lift the hood.
3
Check if the cooling fans are oper-
ating.
If the fans are operating:
Wait until the “EV System over-
heated Output power reduced”
message disappears and then stop
the EV system. If the message does
not disappear, call any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
If the fans are not operating:
Stop the EV system immediately
and call any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
4
After the EV system has cooled
down, inspect the hoses and radia-
tor core (radiator) for any leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
5
The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
If your vehicle overheats
When “EV System overheated
Output power reduced” is shown
on the multi-information display,
your vehicle may be overheating.
Correction procedures
A
B
A
B
C
466
8-2. Steps to take in an emergency
6
Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
Have the vehicle inspected at the near-
est authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer as soon as possible.
WARNING
Q
To prevent an accident or injury when
inspecting under the hood of your
vehicle
Observe the following precautions.
Failure to do so may result in serious
injury such as burns.
O
If steam is seen coming from under the
hood, do not open the hood until the
steam has subsided. The motor com-
partment may be very hot.
O
Keep hands and clothing (especially a
tie, a scarf or a muffler) away from the
fans. Failure to do so may cause the
hands or clothing to be caught, result-
ing in serious injury.
O
Do not loosen the coolant reservoir
cap while the EV system and radiator
are hot. High temperature steam or
coolant could spray out.
NOTICE
Q
When adding power control unit
coolant
Add coolant slowly after the EV system
has cooled down sufficiently. Adding
cool coolant to a hot EV system too
quickly can cause damage to the EV sys-
tem.
Q
To prevent damage to the cooling
system
Observe the following precautions:
O
Avoid contaminating the coolant with
foreign matter (such as sand or dust,
etc.).
O
Do not use any coolant additive.
467
8
8-2. Steps to take in an emergency
Wh
en
troubl
e ar
ises
1
Stop the EV system. Set the park-
ing brake and shift the shift position
to P.
2
Remove the mud, snow or sand
from around the front wheels.
3
Place wood, stones or some other
material under the front wheels to
help provide traction.
4
Restart the EV system.
5
Shift the shift position to D or R and
release the parking brake. Then,
while exercising caution, depress
the accelerator pedal.
Q
When it is difficult to free the vehicle
Press the
switch to turn off TRC.
(
P.329)
If the vehicle becomes stuck
Carry out the following procedures
if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Recovering procedure
WARNING
Q
When attempting to free a stuck vehi-
cle
If you choose to push the vehicle back
and forth to free it, make sure the sur-
rounding area is clear to avoid striking
other vehicles, objects or people. The
vehicle may also lunge forward or lunge
back suddenly as it becomes free. Use
extreme caution.
Q
When shifting the shift position
Be careful not to shift the shift position
with the accelerator pedal depressed.
This may lead to unexpected rapid accel-
eration of the vehicle that may cause an
accident resulting in death or serious
injury.
NOTICE
Q
To avoid damage to the transmission
and other components
O
Avoid spinning the tires and depress-
ing the accelerator pedal more than
necessary.
O
If the vehicle remains stuck even after
these procedures are performed, the
vehicle may require towing to be
freed.
9
469
9
Vehic
le spe
cif
ic
at
ion
s
Vehicle specifications
9-1. Specifications
Maintenance data. . . . . .
470
9-2. Customization
Customizable features . . ...
475
9-3. Initialization
Items to initialize . . . . . .
489
470
9-1. Specifications
9-1.Specifications
*1
: Overall width not including parts
Outside rear view mirrors
*2
: Unladen vehicle
*3
: Vehicles with 215/60R17 tires
*4
: Vehicles with 225/50R18 tires
Q
Vehicle identification number
The vehicle identification number
(VIN) is the legal identifier for your
vehicle.
This is the primary identification num-
ber for your Lexus. It is used in regis-
tering the ownership of your vehicle.
This number is on the top left of the
instrument panel.
This number is also on the manufac-
turer’s label.
Maintenance data
Dimensions and weights
Overall length
4495 mm (177.0 in.)
Overall width
*1
1840 mm (72.4 in.)
Overall height
*2
1545 mm (60.8 in.)
Wheelbase
2640 mm (103.9 in.)
Tread
Front
1558 mm (61.3 in.)
*3
1548 mm (60.9 in.)
*4
Rear
1560 mm (61.4 in.)
*3
1550 mm (61.0 in.)
*4
Gross vehicle mass
2245 kg (4949 lb.)
Maximum permissi-
ble axle capacity
Front
1270 kg (2800 lb.)
Rear
1270 kg (2800 lb.)
Vehicle identification
471
9
9-1. Specifications
Vehic
le spe
cif
ic
at
ion
s
This number is also stamped under the
right-hand front seat.
Q
Motor model type and motor num-
ber
The motor model type and the motor
number are stamped on the motor as
shown.
Electric motor (traction motor)
Model
4KM
Type
Permanent magnet synchronous motor
Maximum output
150 kW
Maximum torque
300 N•m (30.6 kgf•m, 221.3 ft•lbf)
Traction battery
Type
Lithium-ion battery
Voltage
3.7 V/cell
Capacity
153 Ah
Quantity
288 cells
Nominal voltage
355.2 V
472
9-1. Specifications
Q
Power control unit
*
: The coolant capacity is the quantity of reference.
If replacement is necessary, contact any authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Q
12-volt battery
Cooling system
Capacity
*
2.5 L (2.6 qt., 2.3 Imp.qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.
Heater system
Capacity
1.4 L (1.5 qt., 1.2 Imp.qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.
Electrical system
Specific gravity reading at 20°C
(68°F):
1.250 or higher
If the specific gravity is lower than the standard value,
charge the 12-volt battery.
Charging rates:
Quick charge
Slow charge
15 A max.
5 A max.
473
9
9-1. Specifications
Vehic
le spe
cif
ic
at
ion
s
*
: The fluid capacity is a reference quantity.
If replacement is necessary, contact any authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
*1
: Minimum pedal clearance when depressed with a force of 300 N (31 kgf, 66 lbf) while
the EV system is operating.
*2
: Make sure to confirm that the brake system warning light (yellow) does not illuminate. (If
the brake system warning light illuminates, refer to P.433)
Transmission
Fluid capacity
*
4.3 L (4.5 qt., 3.8 Imp.qt.)
Fluid type
Toyota Genuine ATF WS
NOTICE
Q
Transmission fluid type
Using transmission fluid other than the above type may cause abnormal noise or vibra-
tion, or ultimately damage the transmission of your vehicle.
Brakes
Pedal clearance
*1
109 mm (4.29 in.) Min.
Pedal free play
1.0 - 6.0 mm (0.04 - 0.24 in.)
Parking brake indicator
*2
When pushing the parking brake switch for 1 to 4
seconds: comes on
When pulling the parking brake switch for 1 to 4
seconds: turns off
Fluid type
SAE J1703 or FMVSS No. 116 DOT 3,
SAE J1704 or FMVSS No. 116 DOT 4
Steering
Free play
Less than 30 mm (1.2 in.)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст