Lexus UX 300e (2022 year). Manual in english — page 10
175
4
4-1. Key information
Before drivi
ng
that the electronic key battery may be
depleted. Replace the battery when nec-
essary. (
P.414)
• The smart entry & start system or the
wireless remote control does not oper-
ate.
• The detection area becomes smaller.
• The LED indicator on the key surface
does not turn on.
You can replace the battery by yourself
(
P.414). However, as there is a danger
that the electronic key may be damaged, it
is recommended that replacement be car-
ried out by any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer.
O
To avoid serious deterioration, do not
leave the electronic key within 1 m (3 ft.)
of the following electrical appliances that
produce a magnetic field:
• TVs
• Personal computers
• Cellular phones, cordless phones and
battery chargers
• Recharging cellular phones or cordless
phones
• Table lamps
• Induction cookers
Q
Replacing the battery
P.414
Q
Confirmation of the registered key
number
The number of keys already registered to
the vehicle can be confirmed. Ask any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer for
details.
Q
If “A New Key has been Registered
Contact Your Dealer for Details” is
shown on the multi-information display
This message will be displayed each time
the driver’s door is opened when the doors
are unlocked from the outside for approxi-
mately 10 days after a new electronic key
has been registered.
If this message is displayed but you have not
had a new electronic key registered, ask
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer
to check if an unknown electronic key
(other than those in your possession) has
been registered.
NOTICE
Q
To prevent key damage
O
Do not drop the keys, subject them to
strong shocks or bend them.
O
Do not expose the keys to high tem-
peratures for long periods of time.
O
Do not get the keys wet or wash them
in an ultrasonic washer, etc.
O
Do not attach metallic or magnetic
materials to the keys or place the keys
close to such materials.
O
Do not disassemble the keys.
O
Do not attach a sticker or anything else
to the surface of the electronic key.
O
Do not place the keys near objects that
produce magnetic fields, such as TVs,
audio systems and induction cookers,
or medical electrical equipment, such
as low-frequency therapy equipment.
Q
Carrying the electronic key on your
person
Carry the electronic key 10 cm (3.9 in.)
or more away from electric appliances
that are turned on. Radio waves emitted
from electric appliances within 10 cm
(3.9 in.) of the electronic key may inter-
fere with the key, causing the key to not
function properly.
Q
In case of a smart entry & start system
malfunction or other key-related
problems
P.458
Q
When an electronic key is lost
P.457
176
4-1. Key information
The electronic keys are equipped with
the following wireless remote control:
Locks all the doors (
P.178)
Closes the windows and moon
roof
*1, 2
(
P.178)
Unlocks all the doors (
P.178)
Opens the windows and moon
roof
*1, 2
(
P.178)
Opens and closes the power back
door
*1
(
P.185)
Operates Remote Air Condition-
ing System (
P.355)
*1
: If equipped
*2
: These settings must be customized at
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
To take out the mechanical key, push
the release button and take the key out.
The mechanical key can only be inserted in
one direction, as the key only has grooves
on one side. If the key cannot be inserted in
a lock cylinder, turn it over and re-attempt
to insert it.
After using the mechanical key, store it in
the electronic key. Carry the mechanical
key together with the electronic key.
NOTICE
Q
Handling the card key (if equipped)
O
If the battery or card key terminals get
wet, the battery may corrode and the
card key may stop working.
If the key is dropped into water, or if
drinking water, etc., is spilled on the
key, immediately remove the battery
cover and wipe the battery and termi-
nals. (To remove the battery cover,
lightly grasp and pull it.) If the battery is
corroded, have any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer replace the
battery.
O
Do not crush the battery cover or use
a screwdriver to remove the battery
cover.
Forcibly removing the battery cover
may bend or damage the key.
O
If the battery cover is frequently
removed, the battery cover may
become loose.
O
When installing the battery, make sure
to check the direction of the battery.
Installing the battery in the wrong
direction may cause the battery to
deplete rapidly.
O
The surface of the card key may be
damaged, or its coating may peel off in
the following situations:
• The card key is carried together with
hard objects, such as coins and keys.
• The card key is scraped with a sharp
object, such as the tip of a mechanical
pencil.
• The surface of the card key is wiped
with thinner or benzene.
Wireless remote control
Using the mechanical key
A
B
C
D
E
F
177
4
4-1. Key information
Before drivi
ng
If the electronic key battery is depleted or
the entry function does not operate prop-
erly, you will need the mechanical key.
(
P.458)
Q
When required to leave the vehicle’s
key with a parking attendant
Lock the glove box as circumstances
demand. (
P.365)
Remove the mechanical key for your own
use and provide the attendant with the elec-
tronic key only.
Q
If you lose your mechanical keys
P.457
Q
If a wrong key is used
The key cylinder rotates freely to isolate
inside mechanism.
Q
Card key (if equipped)
O
If it is difficult to take out the mechanical
key, push down the release button using
a pen tip, etc. If it is still difficult to pull it
out, use a coin, etc.
O
To store the mechanical key in the card
key, insert it while pressing the release
button.
NOTICE
Q
Handling the card key (if equipped)
Do not apply excess force when inserting
the mechanical key into the card key.
Doing so may damage the card key.
178
4-2. Opening, closing and locking the doors
4-2.Opening, closing and locking the doors
Q
Smart entry & start system (vehi-
cles with entry function)
Carry the electronic key to enable this
function.
1
Grip the front door handle to
unlock the doors.
*
Make sure to touch the sensor on the back
of the handle.
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
*
: The door unlock settings can be
changed.
2
Touch the lock sensor (the indenta-
tion on the upper part of the front
door handle) to lock all the doors.
Check that the door is securely locked.
Q
Wireless remote control
1
Locks all the doors
Check that the door is securely locked.
Press and hold to close the windows and
moon roof.
*1, 2
2
Unlocks all the doors
Press and hold to open the windows and
moon roof.
*1, 2
*1
: If equipped
*2
: These settings must be customized at
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
Q
Switching the door unlock function
(vehicles with entry function)
It is possible to set which doors the entry
function unlocks using the wireless remote
control.
1
Turn the power switch off.
2
Cancel the intrusion sensor and tilt sen-
sor of the alarm system to prevent unin-
tended triggering of the alarm while
changing the settings. (if equipped)
(
P.74)
3
When the indicator light on the key sur-
face is not on, press and hold
or
for approximately 5 seconds
while pressing and holding
.
The setting changes each time an operation
is performed, as shown below. (When
changing the setting continuously, release
Side doors
Unlocking and locking the doors
from the outside
179
4
4-2. Opening, closing and locking the doors
Before drivi
ng
the buttons, wait for at least 5 seconds, and
repeat step
3
.)
For vehicles with alarm: To prevent unin-
tended triggering of the alarm, unlock the
doors using the wireless remote control
and open and close a door once after the
settings have been changed. (If a door is not
opened within 30 seconds after
is
pressed, the doors will be locked again and
the alarm will automatically be set.)
In a case that the alarm is triggered, imme-
diately stop the alarm. (
P.73)
Q
Locking the front doors from the outside
without a key
1
Push down the inside lock button.
(
P.181)
2
Close the door while pulling the door
handle.
The door cannot be locked if the power
switch is in ACC or ON, or the electronic
key is left inside the vehicle.
The key may not be detected correctly and
the door may be locked.
Q
Impact detection door lock release sys-
tem
In the event that the vehicle is subject to a
strong impact, all the doors are unlocked.
Depending on the force of the impact or the
type of accident, however, the system may
not operate.
Q
Operation signals
The emergency flashers flash to indicate
that the doors have been locked/unlocked.
(Locked: once; Unlocked: twice)
A buzzer sounds to indicate that the win-
dows are operating.
Q
Security feature
If a door is not opened within approximately
30 seconds after the vehicle is unlocked,
the security feature automatically locks the
vehicle again.
Q
When the door cannot be locked by the
lock sensor on the upper part of the
door handle (vehicles with entry func-
tion)
When the door cannot be locked even if the
lock sensor on the upper part of the door
handle is touched by a finger, touch the lock
sensor with the palm.
When gloves are being worn, remove the
gloves.
Q
Open door warning buzzer
If an attempt to lock the doors is made when
a door is not fully closed, a buzzer sounds
continuously for 5 seconds. Fully close the
door to stop the buzzer, and lock the vehi-
cle once more.
Q
Setting the alarm (if equipped)
Locking the doors will set the alarm system.
Multi-information
display/Beep
Unlocking function
(Left-hand drive
vehicles)
(Right-hand drive
vehicles)
Exterior: Beeps 3
times
Interior: Pings once
Holding the driver’s
door handle unlocks
only the driver’s door.
Holding the front pas-
senger door handle
unlocks all the doors.
Exterior: Beeps twice
Interior: Pings once
Holding a front door
handle unlocks all the
doors.
180
4-2. Opening, closing and locking the doors
(
P.73)
Q
Conditions affecting the operation of
the smart entry & start system or wire-
less remote control
P.197
Q
If the smart entry & start system or the
wireless remote control does not oper-
ate properly
O
Use the mechanical key to lock and
unlock the doors. (
P.458)
O
Replace the key battery with a new one if
it is depleted. (
P.414)
Q
If the 12-volt battery is discharged
The doors cannot be locked and unlocked
using the smart entry & start system or
wireless remote control. Lock or unlock the
doors using the mechanical key. (
P.458)
Q
Rear seat reminder function
O
In order to remind you not to forget lug-
gage, etc. on the rear seat, when the
power switch is turned off after any of the
following conditions is met, a buzzer will
sound and a message will be displayed on
the multi-information display for approxi-
mately 6 seconds.
• The EV system is started within 10 min-
utes after opening and closing a rear
door.
• A rear door has been opened and closed
after the EV system was started.
However, if a rear door is opened and then
closed within approximately 2 seconds, the
rear seat reminder function may not oper-
ate.
O
The rear seat reminder function deter-
mines that luggage, etc. has been placed
on a rear seat based on opening and
closing of a rear door. Therefore,
depending on the situation, the rear seat
reminder function may not operate and
you may still forget luggage, etc. on the
rear seat, or it may operate unnecessar-
ily.
O
The rear seat reminder function can be
enabled/disabled. (
P.476)
Q
Customization
Settings (e.g. unlocking function using a
key) can be changed. (Customizable fea-
tures:
P.478)
WARNING
Q
To prevent an accident
Observe the following precautions while
driving the vehicle.
Failure to do so may result in a door
opening and an occupant falling out,
resulting in death or serious injury.
O
Ensure that all doors are properly
closed and locked.
O
Do not pull the inside handle of the
doors while driving.
Be especially careful for the front
doors, as the doors may be opened
even if the inside lock buttons are in
locked position.
O
Set the rear door child-protector locks
when children are seated in the rear
seats.
Q
When opening or closing a door
Check the surroundings of the vehicle
such as whether the vehicle is on an
incline, whether there is enough space
for a door to open and whether a strong
wind is blowing. When opening or clos-
ing the door, hold the door handle tightly
to prepare for any unpredictable move-
ment.
Q
When using the wireless remote con-
trol and operating the power win-
dows or moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof. Also, do not
allow children to operate the wireless
remote control. It is possible for children
and other passengers to get caught in
the power window or moon roof.
181
4
4-2. Opening, closing and locking the doors
Before drivi
ng
Q
Door lock switches (to
lock/unlock)
1
Locks all the doors
2
Unlocks all the doors
Q
Inside lock buttons (to lock)
Push down the inside lock button to
lock the door.
Q
Inside door handles (to unlock)
For the front doors
Pull the handle to unlock and open the
door.
When the door is unlocked, the inside lock
button will pop up.
For the rear doors
Pull the handle to unlock the door. Pull
the handle a second time to open the
door.
When the door is unlocked, the inside lock
button will pop up.
Q
If a symbol indicating one or more doors
are open is shown on the multi-informa-
tion display
The hood or one or more of the doors are
not fully closed. The system also indicates
which doors are not fully closed. If the vehi-
cle reaches a speed of 5 km/h (3 mph), a
buzzer sounds to indicate that the door(s)
are not yet fully closed. Make sure that the
hood and all the doors are closed.
The door cannot be opened from
inside the vehicle when the lock is set.
1
Unlock
2
Lock
These locks can be set to prevent children
from opening the rear doors. Push down
on each rear door switch to lock both rear
Unlocking and locking the doors
from the inside
Rear door child-protector lock
182
4-2. Opening, closing and locking the doors
doors.
The following functions can be set or
canceled:
For instructions on customizing, refer to
P.478.
Automatic door locking and
unlocking systems
Function
Operation
Speed linked door
locking function
All doors are auto-
matically locked
when vehicle speed
is approximately 20
km/h (12 mph) or
higher.
Shift position linked
door locking func-
tion
All doors are auto-
matically locked
when the shift posi-
tion is shifted to a
position other than
P.
Shift position linked
door unlocking
function
All doors are auto-
matically unlocked
when shift position is
shifted to P.
Driver’s door linked
door unlocking
function
All doors are auto-
matically unlocked
when driver’s door is
opened within
approximately 45
seconds after turn-
ing the power switch
off.
Back door
The back door can be
locked/unlocked and
opened/closed by the following
procedures.
WARNING
Q
Before driving the vehicle
Make sure that the back door is fully
closed. If the back door is not fully closed,
it may open unexpectedly while driving,
causing an accident.
Q
Caution while driving
O
Keep the back door closed while driv-
ing.
If the back door is left open, it may hit
nearby objects while driving or lug-
gage may be unexpectedly thrown
out, causing an accident.
O
Never let anyone sit in the luggage
compartment. In the event of sudden
braking, sudden swerving or a colli-
sion, they are susceptible to death or
serious injury.
Q
When children are in the vehicle
Observe the following precautions.
Failure to do so may result in death or
serious injury.
O
Do not allow children to play in the
luggage compartment.
If a child is accidentally locked in the
luggage compartment, they could
have heat exhaustion or other injuries.
O
Do not allow a child to open or close
the back door.
Doing so may cause the back door to
move unexpectedly, or cause the
child’s hands, arms, head, or neck to
be caught by the closing back door.
183
4
4-2. Opening, closing and locking the doors
Before drivi
ng
Q
Smart entry & start system (vehi-
cles with entry function)
Carry the electronic key to enable this
WARNING
Q
Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the
body to be caught, resulting in death or
serious injury.
O
Remove any heavy loads, such as
snow and ice, from the back door
before opening it. Failure to do so may
cause the back door to suddenly shut
again after it is opened.
O
When opening or closing the back
door, thoroughly check to make sure
the surrounding area is safe.
O
If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close.
O
Use caution when opening or closing
the back door in windy weather as it
may move abruptly in strong wind.
O
Vehicles without power back door:
The back door may suddenly shut if it is
not opened fully. It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.
O
Vehicles with power back door: The
back door may suddenly shut if it is not
opened fully, while on a steep incline.
Make sure that the back door is
secured before using the luggage
compartment.
O
When closing the back door, take
extra care to prevent your fingers, etc.,
from being caught.
O
When closing the back door, make
sure to press it lightly on its outer sur-
face. If the back door handle is used to
fully close the back door, it may result
in hands or arms being caught.
O
Do not pull on the back door damper
stay (vehicles without power back
door) (
P.185) or back door spindle
(vehicles with power back door)
(
P.192) to close the back door, and
do not hang on the back door damper
stay (vehicles without power back
door) or back door spindle (vehicles
with power back door).
Doing so may cause hands to be
caught or the back door damper stay
(vehicles without power back door) or
back door spindle (vehicles with
power back door) to break, causing an
accident.
O
If a bicycle carrier or similar heavy
object is attached to the back door, it
may suddenly shut again after being
opened, causing someone’s hands,
arms, head or neck to be caught and
injured. When installing an accessory
part to the back door, using a genuine
Lexus part is recommended.
Unlocking and locking the back
door from the outside
184
4-2. Opening, closing and locking the doors
function.
1
Locks all the doors
Check that the door is securely locked.
2
Unlocks all the doors
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
Q
Wireless remote control
P.178
Q
Door lock switch
P.181
Q
Open
Raise the back door while pressing up
the back door opener switch.
Q
Close
Lower the back door using the back
door handle, and make sure to push
the back door down from the outside
to close it.
Q
Luggage compartment light
O
The luggage compartment light turns on
when the back door is opened.
O
If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 20
minutes.
Q
If the back door opener is inoperative
The back door can be unlocked from the
inside.
1
Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
Unlocking and locking the back
door from the inside
Opening/closing the back door
(vehicles without power back
door)
185
4
4-2. Opening, closing and locking the doors
Before drivi
ng
2
Loose the screw and move the cover.
3
Move the lever.
Q
Opening/closing the back door
using the wireless remote control
Press the switch for 1 second.
If the back door is locked, unlock it before
operating the power back door.
NOTICE
Q
Back door damper stays
The back door is equipped with damper
stays
that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to
the back door damper stay
, resulting
in malfunction.
O
Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the damper stay rod.
O
Do not touch the damper stay rod with
gloves or other fabric items.
O
Do not attach any accessories other
than genuine Lexus parts to the back
door.
O
Do not place your hand on the damper
stay or apply lateral forces to it.
Opening/closing the back door
(vehicles with power back door)
A
A
186
4-2. Opening, closing and locking the doors
Q
Opening/closing the back door
from the inside
Press the switch for 1 second.
A buzzer sounds and the back door auto-
matically opens and closes.
Pressing the switch while the back door is
opening/closing stops the operation.
When the switch is pressed again for 1 sec-
ond during the halted operation, the back
door will perform the reverse operation.
Q
Opening/closing the back door
from the outside
Open
When the back door is unlocked: Press the
back door opener switch.
When the back door is locked: While car-
rying the electronic key on your person,
press the back door opener switch.
A buzzer sounds and the back door auto-
matically opens.
Pressing the switch while the back door is
opening stops the operation.
Close
Press the switch.
A buzzer sounds and the back door auto-
matically closes.
Pressing the switch while the back door is
closing stops the operation.
Pressing the switch again will open the
back door automatically.
Close the back door and lock all
doors (close & lock function)
Press the switch.
A different buzzer than the normal one will
sound and the power back door will begin
closing automatically. When the power
back door is closed, all of the doors will
lock simultaneously and operation signals
will indicate that all of the doors have been
locked.
If the switch is pressed while the power
back door is closing, the operation will
stop.
Pressing the switch again will close the
187
4
4-2. Opening, closing and locking the doors
Before drivi
ng
power back door automatically.
Q
Closing the back door using the
back door handle
Lower the back door using the back
door handle, then a buzzer sounds and
the back door automatically closes.
Q
Hands Free Power Back Door (if
equipped)
1
While carrying an electronic key,
stand within the smart entry & start
system operation range, approxi-
mately 50 to 70 cm (19.7 to 27.6
in.) from the rear bumper.
Kick sensor
Hands Free Power Back Door
operation detection area
Smart entry & start system opera-
tion detection area (
P.196)
A
B
C
188
4-2. Opening, closing and locking the doors
2
Perform a kick operation by mov-
ing your foot to within approxi-
mately 10 cm (3.9 in.) of the rear
bumper and then pulling it back.
• Perform the entire kick operation
within 1 second.
• The Hands Free Power Back Door
will not start operating while a foot is
detected under the rear bumper.
• Operate the Hands Free Power
Back Door without contacting the
rear bumper with your foot.
• If another electronic key is in the
cabin or luggage compartment, it
may take slightly longer than normal
for the operation to occur.
Kick sensor
Hands Free Power Back Door
operation detection area
3
When the kick sensor detects that
your foot is pulled back, a buzzer
will sound and the back door will
automatically fully open/close.
If a foot is moved under the rear bumper
while the back door is operating, the back
door will stop moving.
Q
Luggage compartment light
O
The luggage compartment light turns on
when the back door is opened.
O
If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 20
minutes.
Q
Power back door operating conditions
With the power back door operations set to
ON, it can automatically open and close for
the following conditions:
O
The power back door is unlocked. How-
ever, the power back door will operate if
it is locked, in the following situations:
• When an electronic key is being carried
and the back door opener switch is
pressed
• When opening of the power back door
using the wireless remote control when it
is locked is enabled by a customized set-
ting.
O
When the power switch is in ON during
opening operations, the back door
unlocks and operates for any of the fol-
lowing conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift position is in P
Q
Hands Free Power Back Door (if
equipped) operating conditions
O
When the Hands Free Power Back Door
(kick sensor) operation setting is turned
on
O
When an electronic key is carried within
the operation range
Q
Back door closer
In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the power switch, the
back door closer operates.
Q
Operation of the power back door
O
A buzzer sounds to indicate that the back
door is opening/closing.
O
When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
O
When the power back door automati-
cally opens, if an abnormality due to peo-
A
B
189
4
4-2. Opening, closing and locking the doors
Before drivi
ng
ple or objects is detected, operation will
stop.
Q
Back door reserve lock function
This function reserves locking of all doors
beforehand, when the power back door is
open.
When the following procedure is per-
formed, all the doors except the power
back door are locked and then power back
door will also be locked at the same time it
is closed.
1
Close all doors, except the back door.
2
During the power back door closing
operation, lock the doors using the
smart entry & start system (
P.183) or
the wireless remote control. (
P.176)
A buzzer sounds and the emergency flash-
ers flash to indicate that all the doors have
been closed and locked.
Before leaving the vehicle, make sure that
all the doors are closed and locked. The
doors may not be locked due to the jam
protection function or door lock prevention
function.
Q
Close & lock function
When the power back door is open, this
function closes the power back door and
then locks all of the doors simultaneously.
When the following procedures are per-
formed and there are no electronic keys for
the vehicle within the vehicle, all of the
doors will lock when the power back door is
completely closed.
1
Close all of the doors except the power
back door.
2
While carrying an electronic key, press
the
switch on the lower part of
the power back door (
P.186).
A different buzzer than the normal one will
sound and then the power back door will
begin closing automatically. When the
power back door is closed, all of the doors
will lock simultaneously and operation sig-
nals will indicate that all of the doors have
been locked.
The double locking system will not operate
at this time.
Q
Situations in which the close & lock
function may not operate properly
In the following situations, the close & lock
function may not operate properly:
O
If the
switch on the lower part of
the power back door (
P.186) is
pressed by a hand which is holding an
electronic key
O
If the
switch on the lower part of
the power back door (
P.186) is
pressed when the electronic key is in a
bag, etc. that is placed on the ground
O
If the
switch on the lower part of
the power back door (
P.186) is
pressed with the electronic key not near
the vehicle.
Q
Situations in which the Hands Free
Power Back Door (if equipped) may not
operate properly
In the following situations, the Hands Free
Power Back Door may not operate prop-
erly:
O
When a foot remains under the rear
bumper
O
If the rear bumper is strongly hit with a
foot or is touched for a while
If the rear bumper has been touched for a
while, wait for a short time before
attempting to operate the Hands Free
Power Back Door again.
O
When operated while a person is too
close to the rear bumper
O
When an external radio wave source
interferes with the communication
between the electronic key and the vehi-
cle (
P.197)
O
When charging from an external power
source or connecting the charging cable
O
When the vehicle is parked near an elec-
trical noise source or a metallic object
which affects the sensitivity of the Hands
Free Power Back Door, such as a pay
parking spot, gas station, electrically
heated road, fluorescent light or iron
plate
190
4-2. Opening, closing and locking the doors
O
When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
O
When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
O
When mud, snow, ice, etc. is attached to
the rear bumper
O
When the vehicle has been parked for a
while near objects that may move and
contact the rear bumper, such as plants
O
When an accessory is installed to the rear
bumper
If an accessory has been installed, turn
the Hands Free Power Back Door (kick
sensor) operation setting off.
Q
Preventing unintentional operation of
the Hands Free Power Back Door (if
equipped)
When an electronic key is in the operation
range, the Hands Free Power Back Door
may operate unintentionally, so be careful
in the following situations.
O
When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
O
When dirt is wiped off the rear bumper
O
When a small animal or small object, such
as a ball, moves under the rear bumper
O
When an object is moved from under the
rear bumper
O
If someone is swinging their legs while sit-
ting on the rear bumper
O
If the legs or another part of someone’s
body contacts the rear bumper while
passing by the vehicle
O
When the vehicle is parked near an elec-
trical noise source which affects the sen-
sitivity of the Hands Free Power Back
Door, such as a pay parking spot, gas sta-
tion, electrically heated road, or fluores-
cent light
O
When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
O
When the vehicle is parked in a place
where objects such as plants are near the
rear bumper
O
If luggage, etc. is set near the rear
bumper
O
If accessories or a vehicle cover is
installed/removed near the rear bumper
O
When the vehicle is being towed
To prevent unintentional operation, turn the
Hands Free Power Back Door (kick sensor)
operation setting off.
Q
When reconnecting the 12-volt battery
To enable the power back door to operate
properly, close the back door manually.
Q
Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
clamped, etc., the jam protection function
operates.
From that position the door automatically
moves a little in the opposite direction and
then the function stops.
Q
If the back door opener is inoperative
The back door can be unlocked from the
inside.
1
Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст