LEXUS GX 460 (2019 year). Instruction — part 31
488
6-3. Do-it-yourself maintenance
Slide and pull out the filter. Replace
the filter with a new one.
The “
UP” marks shown on the filter
should be pointing up.
■
Changing interval
Inspect and replace the air conditioning filter according to the maintenance schedule. In
dusty areas or areas with heavy traffic flow, early replacement may be required.
(For scheduled maintenance information, please refer to the “Owner’s Manual
Supplement” or “Scheduled Maintenance”.)
■
If air flow from the vents decreases dramatically
The filter may be clogged. Check the filter and replace if necessary.
4
NOTICE
■
When using the air conditioning system
Make sure that a filter is always installed.
Using the air conditioning system without a filter may cause damage to the system.
489
6-3. Do-it-yourself maintenance
6
Main
Electronic key battery
●
Flathead screwdriver
●
Small Phillips-head screwdriver
●
Lithium battery (CR1632)
Take out the mechanical key.
Remove the cover.
To prevent damage to the key, cover the
tip of the screwdriver with a rag.
Remove the depleted battery.
Insert a new battery with the “+” termi-
nal facing up.
Replace the battery with a new one if it is depleted.
You will need the following items:
Replacing the battery
1
2
3
490
6-3. Do-it-yourself maintenance
■
Use a CR1632 lithium battery
●
Batteries can be purchased at your Lexus dealer, local electrical appliance shops or
camera stores.
●
Replace only with the same or equivalent type recommended by the manufacturer.
●
Dispose of used batteries according to the local laws.
■
If the electronic key battery is depleted
The following symptoms may occur:
●
The smart access system with push-button start and wireless remote control will not
function properly.
●
The operational range will be reduced.
CAUTION
■
Removed battery and other parts
These parts are small and if swallowed by a child, they can cause choking. Keep away
from children. Failure to do so could result in death or serious injury.
NOTICE
■
For normal operation after replacing the battery
Observe the following precautions to prevent accidents:
●
Always work with dry hands.
Moisture may cause the battery to rust.
●
Do not touch or move any other component inside the remote control.
●
Do not bend either of the battery terminals.
491
6-3. Do-it-yourself maintenance
6
Main
Checking and replacing fuses
Turn the engine switch off.
Open the fuse box cover.
Remove the fuse with the pull-out tool.
Only type A fuse can be removed using
the pull-out tool.
If any of the electrical components do not operate, a fuse may have blown. If
this happens, check and replace the fuses as necessary.
1
2
Engine compartment
Driver’s side instrument panel
Push the tab in and lift the lid off.
Remove the lid.
3
492
6-3. Do-it-yourself maintenance
Check if the fuse is blown.
Normal fuse
Blown fuse
Type A:
Replace the blown fuse with a new fuse of an appropriate amperage rating. The
amperage rating can be found on the fuse box lid.
Type B, C and D:
Contact your Lexus dealer.
4
1
2
Type A
Type B
Type C
Type D
493
6-3. Do-it-yourself maintenance
6
Main
■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb may need
replacement. (
●
If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
■
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
■
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
●
Never use a fuse of a higher amperage rating than indicated, or use any other object
in place of a fuse.
●
Always use a genuine Lexus fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
●
Do not modify the fuses or the fuse boxes.
NOTICE
■
Before replacing fuses
Have the cause of electrical overload determined and repaired by your Lexus dealer,
as soon as possible.
494
6-3. Do-it-yourself maintenance
Headlight aim
Adjustment bolt A
Adjustment bolt B
Make sure the vehicle has a full tank of gasoline and the area around the
headlight is not deformed.
Park the vehicle on level ground.
Sit in the driver’s seat.
Bounce the vehicle several times.
Vertical movement adjusting bolts
1
2
Before checking the headlight aim
1
2
3
4
495
6-3. Do-it-yourself maintenance
6
Main
Using a Phillips-head screwdriver, turn bolt A in either direction.
Remember the turning direction and the number of turns.
Turn bolt B the same number of turns
and in the same direction as step .
If the headlight cannot be adjusted using
this procedure, take the vehicle to your
Lexus dealer to adjust the headlight aim.
Adjusting the headlight aim
1
Left-hand side
Right-hand side
2
1
496
6-3. Do-it-yourself maintenance
Light bulbs
Check the wattage and color of the light bulb being replaced. (
■
Front
You may replace the following bulbs yourself. The difficulty level of replace-
ment varies depending on the bulb. If necessary bulb replacement seems diffi-
cult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
Preparing for light bulb replacement
Removing the engine compartment covers
Bulb locations
Front turn signal light
Headlight high beam
1
2
497
6-3. Do-it-yourself maintenance
6
Main
■
Rear
Rear turn signal light
Back-up light
Rear side marker light
Running board lights
1
2
3
4
498
6-3. Do-it-yourself maintenance
■
Headlight high beams
Turn the cover counterclockwise.
Turn the bulb base counterclock-
wise.
Unplug the connector while pull-
ing the lock release.
Replacing light bulbs
1
2
3
499
6-3. Do-it-yourself maintenance
6
Main
Replace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb with
the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to check
that it is not loose, turn the headlights
on once and visually confirm that no
light is leaking through the mounting.
When installing the cover, conduct in reverse.
4
5
6
1
500
6-3. Do-it-yourself maintenance
■
Front turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
1
2
3
501
6-3. Do-it-yourself maintenance
6
Main
■
Rear turn signal lights and rear side marker lights
Open the back door.
Left-hand side
Remove the bolts and lamp assem-
bly.
Right-hand side
Remove the bolts.
Close the back door half way
and remove the lamp assem-
bly.
1
1
2
502
6-3. Do-it-yourself maintenance
Unplug the connector while
pushing the lock release.
Turn the bulb bases counter-
clockwise.
Rear turn signal light
Rear side marker light
Remove the light bulb.
Rear turn signal light
Rear side marker light
When installing, reverse the steps listed.
2
3
1
2
4
1
2
5
503
6-3. Do-it-yourself maintenance
6
Main
■
Back-up lights
Remove the bolts and pull down
the under cover.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
1
2
3
4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст