Lexus LS500h (2022 year). Manual in english — page 8
136
3-3. Adjusting the seats
LEXUS LS500h Owner's Manual
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■
Cancelation procedure
Carry only the key you want to cancel
and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled
properly.
1
Turn the power switch to ON
mode.
2
Check that the shift position is in P.
3
While pressing the “SET” button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■
Recall procedure
1
Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver’s door using the
smart access system with push-but-
ton start or wireless remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel and head-up display [if
equipped]). However, the seat will move to
a position slightly behind the recorded
position in order to make entering the vehi-
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the power switch to ACCES-
SORY mode or ON mode, or fas-
ten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
■
Recalling the driving position using the
memory recall function
●
Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If a door other than the driver’s door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
■
Customization
Some functions can be customized.
(
137
3-3. Adjusting the seats
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
*
: If equipped
1
Turn the power switch to ON
mode.
2
Display the home screen on the
Rear Multi Operation Panel
(
P.352) and then touch “Seat”.
3
Touch “Left” or “Right”.
4
Adjust the rear seat to the desired
position and then touch “SET”.
5
Touch “1” or “2”.
If the preset is being used, the previously
recorded seat position will be overwritten.
■
In order to correctly use the position
memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
1
Turn the power switch to ON
mode.
2
Display the home screen on the
Rear Multi Operation Panel
(
3
Touch “Left” or “Right”.
4
Touch “1” or “2”.
When the operating conditions are not
met, the buttons will be grayed out.
To stop the operation touch “STOP”.
If the seat is adjusted while a memorized
position is being recalled, the automatic
operation will stop. (The seat will change to
manual operation.)
■
Operating condition
The weight of an occupant is detected on
the rear seat or the rear seat belt is fas-
tened.
Once weight is detected on the seat, the
seat will be judged as occupied until the
rear door is opened then closed or the
power switch is turned off.
■
Recalling a rear seat position
If a memorized rear seat position is recalled,
the seat may stop part-way to ensure suffi-
cient space for the rear passenger.
■
Recalling the ottoman position (if
equipped)
When a seat position is recalled, the otto-
man will not raise or extend. The ottoman
position can only be recalled if the memo-
rized position is lower and shorter than the
current position.
Rear seat position memory
*
The rear seat position can be mem-
orized and recalled with the touch
of a button.
Recording a position into mem-
ory
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that
the rear passengers do not strike the
front seats.
Recalling the memorized posi-
tion
138
3-3. Adjusting the seats
LEXUS LS500h Owner's Manual
■
Front seats
Center Display
1
Press the seat switch.
2
Using the Remote Touch pad,
select “Driver Seat Adjustment” or
“Passenger Seat Adjustment”.
3
Select then the desired adjust-
ment
button , , ,
or
to
adjust the head restraint.
Up
Backward
Down
Forward
The head restraint moves while the adjust-
ment button is selected.
Head restraints
Head restraints are provided for all
seats.
Vehicles with power rear seat: The
head restraint for the rear center
seat is integrated into the seatback
and cannot be adjusted.
WARNING
■
Head restraint precautions
Observe the following precautions
regarding the head restraints. Failure to
do so may result in death or serious
injury.
●
Use the head restraints designed for
each respective seat.
●
Adjust the head restraints to the cor-
rect position at all times.
●
Manual type: After adjusting the head
restraints, push down on them and
make sure they are locked in position.
●
Do not drive with the head restraints
removed.
Adjusting a head restraint verti-
cally and horizontally (power
head restraints)
A
B
C
D
E
B
C
D
E
139
3-3. Adjusting the seats
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
Seat adjustment switches (on some
models)
1
Up
2
Down
■
Rear seats
1
Display the home screen on the
Rear Multi Operation Panel
(
P.352) and then touch “Seat”.
2
Touch “Left” or “Right”.
3
Touch then the desired adjust-
ment
button , , ,
or
to
adjust the head restraint.
Up
Backward
Down
Forward
The head restraint moves while the adjust-
ment button is touched.
1
Up
Pull the head restraints up.
2
Down
Push the head restraint down while press-
ing the lock release button
.
■
Front seat head restraints (power head
restraints)
Depending on the position of the front seat,
the front head restraint may not be able to
be adjusted upward if it is close to the ceil-
ing.
■
Adjusting the height of the head
restraints
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
■
Adjusting the rear seat head restraints
(manual head restraints)
Always raise the head restraint one level
from the stowed position when using.
A
B C D
E
B
C
D
E
Adjusting a head restraint verti-
cally (manual head restraints)
A
140
3-3. Adjusting the seats
LEXUS LS500h Owner's Manual
Push the sides of the head restraint.
Pull the head restraint up while press-
ing the lock release button .
■
Removing the head restraints (power
head restraints)
For removal and installation of the head
restraint, contact your Lexus dealer.
Align the head restraint with the instal-
lation holes and push it down to the
lock position.
Press and hold the lock release button
when lowering the head restraint.
Adjusting the side supports (if
equipped)
Removing the head restraints
(manual head restraints)
Installing the head restraints
(manual head restraints)
A
A
141
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
3-4.Adjusting the steering wheel and mirrors
Operating the switch moves the steer-
ing wheel in the following directions:
1
Up
2
Down
3
Toward the driver
4
Away from the driver
■
The steering wheel can be adjusted
when
The power switch is in ACCESSORY or
ON mode
*
.
*
: If the driver’s seat belt is fastened, the
steering wheel can be adjusted regard-
less of power switch mode.
■
Automatic adjustment of the steering
position
A desired steering position can be entered
to memory and recalled automatically by
the driving position memory system.
(
■
Power easy access system
The steering wheel and driver’s seat move
in accordance with power switch mode and
the driver’s seat belt condition. (
■
Customization
Some functions can be customized.
(
Press on or close to the
mark.
Steering wheel
Adjustment procedure
WARNING
■
Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury.
Sounding the horn
142
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
*
: If equipped
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
Turn the automatic anti-glare function
mode on/off
When the automatic anti-glare function is
in ON mode, the indicator
illuminates.
The function will set to ON mode each
time the power switch is turned to ON
mode.
Pressing the button turns the function to
OFF mode. (The indicator
also turns
off.)
■
To prevent sensor error
To ensure that the sensors operate properly,
do not touch or cover them.
Inside rear view mirror
*
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
WARNING
■
Caution while driving
Do not adjust the position of the mirror
while driving.
Doing so may lead to mishandling of the
vehicle and cause an accident, resulting
in death or serious injury.
Anti-glare function
A
A
143
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
*
: If equipped
Camera indicator
Indicates that the camera is operating nor-
mally.
Icon display area
Displays icons, adjusting gauge, etc.
(
Select button
Press to change the setting of the item you
want to adjust.
Menu button
Press to display the icon display area and
select the item you want to adjust.
Lever
Operate to change between digital mirror
mode and optical mirror mode.
Operate the lever to change between
digital mirror mode and optical mirror
mode.
Digital Rearview Mirror
*
The Digital Rearview Mirror is a
system that uses the camera on the
rear of the vehicle and displays its
image on the display of the Digital
Rearview Mirror.
The Digital Rearview Mirror can be
changed between optical mirror
mode and digital mirror mode by
operating the lever.
The Digital Rearview Mirror allows
the driver to see the rear view
despite obstructions, such as the
head restraints, luggage or rear
sunshade ensuring rear visibility.
Also, the rear seats are not dis-
played and privacy of the passen-
gers is enhanced.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
Before using the Digital Rearview
Mirror
●
Make sure to adjust the mirror before
driving. (
• Change to optical mirror mode and
adjust the position of the Digital Rear-
view Mirror so that the area behind
your vehicle can be viewed properly.
• Change to digital mirror mode and
adjust the display settings.
●
As the range of the image displayed by
the Digital Rearview Mirror is different
from that of the optical mirror, make
sure to check this difference before
driving.
System components
Changing modes
A
B
C
D
E
144
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
1
Digital mirror mode
Displays an image of the area behind the
vehicle.
will illuminate in this mode.
2
Optical mirror mode
Turns off the display of the Digital Rearview
Mirror allows it to be used as an optical
mirror.
■
Digital mirror mode operating condi-
tion
The power switch is turned to ON mode.
When the power switch is changed from
ON mode to off or ACCESSORY mode,
the image will disappear after several sec-
onds.
■
When using the Digital Rearview Mir-
ror in digital mirror mode
●
If it is difficult to see the displayed image
due to light reflected off the Digital Rear-
view Mirror, the camera being dirty, or if
lights of a vehicle behind your vehicle or
the displayed image are bothering you,
change to optical mirror mode.
●
When the trunk is open, the Digital Rear-
view Mirror image may not display prop-
erly. Before driving, make sure the trunk
is closed.
●
If the display is difficult to see due to
reflected light, close the sunshade for the
moon roof.
●
Any of the following conditions may
occur when driving in the dark, such as at
night. None of them indicates that a mal-
function has occurred.
• Colors of objects in the displayed image
may differ from their actual color.
• Depending on the height of the lights of
the vehicle behind, the area around the
vehicle may appear white and blurry.
• Automatic image adjustment for brighter
surrounding image may cause flickering.
If it is difficult to see the displayed image or
flickering bothers you, change to optical
mirror mode.
●
The Digital Rearview Mirror may
become hot while it is in digital mirror
mode.
This is not a malfunction.
●
Depending on your physical condition or
age, it may take longer than usual to focus
on the displayed image. In this case,
change to optical mirror mode.
●
Do not let passengers stare at the dis-
played image when the vehicle is being
driven, as doing so may cause motion
sickness.
■
When the system malfunctions
If the symbol shown in the illustration is dis-
played when using the Digital Rearview
Mirror in digital mirror mode, the system
may be malfunctioning. The symbol will dis-
appear in a few seconds. Operate the lever,
change to optical mirror mode and have the
vehicle inspected by your Lexus dealer.
■
Adjusting the mirror height
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Change to optical mirror mode, adjust-
ing the height of the rear view mirror by
Adjusting the mirror
145
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
moving it up and down.
■
Display settings (digital mirror
mode)
Settings of the display in the digital mir-
ror mode, on/off operation of the auto-
matic anti-glare function, etc. can be
changed.
1
Press the menu button.
The icons will be displayed.
2
Press the menu button repeatedly
and select the item you want to
adjust.
3
Press
or
to change the set-
ting.
The icons will disappear if a button is not
operated for approximately 5 seconds or
more.
*
: This is a function for the optical mirror
mode, however, the setting can also be
changed while using the digital mirror
mode.
■
Enabling/disabling the automatic
anti-glare function (optical mirror
mode)
The automatic anti-glare function in the
optical mirror mode can be
enabled/disabled. The setting can be
changed in both the digital mirror
mode and the optical mirror mode.
When using the digital mirror mode
When using the optical mirror mode
1
Press the menu button.
Icons
Settings
Select to adjust the brightness of
the display.
Select to adjust the area dis-
played up/down.
Select to adjust the area dis-
played to the left/right.
Select to adjust the angle of the
displayed image.
Select to zoom in/out the dis-
played image.
Select to enable/disable the
automatic anti-glare function.
*
Responding to the brightness of
the headlights of vehicles
behind, the reflected light is
automatically adjusted.
The automatic anti-glare func-
tion is enabled each time the
power switch is changed to ON
mode.
146
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
The icons will be displayed.
2
Press the menu button repeatedly
and select
.
The setting display will be displayed.
3
Press
or
to enable
(“ON”)/disable (“OFF”) the auto-
matic anti-glare function.
The icons will disappear if a button is not
operated for approximately 5 seconds or
more.
■
Adjusting the display (digital mirror
mode)
●
If the displayed image is adjusted, it may
appear distorted. This is not a malfunc-
tion.
●
If the brightness of the Digital Rearview
Mirror is set too high, it may cause eye
strain. Adjust the Digital Rearview Mirror
to an appropriate brightness. If your eyes
become tired, change to optical mirror
mode.
●
The brightness of the Digital Rearview
Mirror will change automatically accord-
ing to the brightness of the area in front of
your vehicle.
■
To prevent the light sensors from mal-
functioning
To prevent the light sensors from malfunc-
tioning, do not touch or cover them.
■
Cleaning the mirror surface
If the mirror surface is dirty, the image
on the display may be difficult to see.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
While driving
●
Do not adjust the position of the Digital
Rearview Mirror or adjust the display
settings while driving.
Stop the vehicle and operate the Digi-
tal Rearview Mirror control switches.
Failure to do so may cause a steering
wheel operation error, resulting in an
unexpected accident.
●
Always pay attention to the vehicle’s
surroundings.
The size of the vehicles and other objects
may look different when in digital mirror
mode and optical mirror mode.
When backing up, make sure to directly
check the safety of the area around your
vehicle, especially behind the vehicle.
Additionally, if a vehicle approaches from
the rear in the dark, such as at night, the
surrounding area may appear dim.
■
To prevent causes of fire
If the driver continues using the Digital
Rearview Mirror while smoke or odor
comes from the mirror, it may result in
fire. Stop using the system immediately
and contact your Lexus dealer.
Cleaning the Digital Rearview
Mirror
147
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
Clean the mirror surface gently using a
soft dry cloth.
■
Cleaning the camera
If the camera lens is dirty or covered
with foreign matter, such as water
droplets, snow, mud, etc., the displayed
image may not be clear. In this case,
rinse the camera lens with a large
quantity of water and then wipe it clean
with a soft cloth dampened with water.
Dirt on the camera lens can be cleaned
by operating the dedicated camera
cleaning washer. (
■
The camera
The camera for the Digital Rearview Mirror
is located as shown.
NOTICE
■
To prevent the Digital Rearview Mir-
ror from malfunctioning
●
Do not use detergents, such as thinner,
benzine, and alcohol to clean the mir-
ror. They may discolor, deteriorate or
damage the mirror surface.
●
Do not smoke, use matches, use ciga-
rette lighters or allow open flames
near the mirror. It may damage the
mirror or cause a fire.
●
Do not remove, disassemble or modify
the mirror.
■
To prevent the camera from malfunc-
tioning
●
Observe the following precautions,
otherwise the Digital Rearview Mirror
may not operate properly.
• Do not strike or hit the camera or sub-
ject it to a strong impact, as the camera
installation position and angle may be
changed.
• Do not remove, disassemble or modify
the camera.
• When washing the camera, rinse it
with a large quantity of water and then
wipe it clean with a soft cloth damp-
ened with water.
Do not strongly rub the camera lens,
as it may be scratched and will not be
able to transmit a clear image.
• Do not allow organic
solvent, car wax,
window cleaner or glass coat to
adhere to the camera cover. If this hap-
pens, wipe it off as soon as possible.
• Do not apply hot water to the camera
in cold weather, as the sudden change
of temperature may cause the camera
to not operate properly.
• When using a high pressure washer to
wash the vehicle, do not directly spray
the camera and its surrounding area,
as doing so may cause the camera to
not operate properly.
●
Do not subject the camera to a strong
impact as this could cause a malfunc-
tion.
If this happens, have the vehicle
inspected by your Lexus dealer as
soon as possible.
148
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
If you notice any of the following symptoms, refer to the following table for the likely
cause and the solution.
If the symptom is not resolved by the solution, have the vehicle inspected by your
Lexus dealer.
If you notice any symptoms
Symptom
Likely cause
Solution
The image is difficult to
see.
The mirror surface is dirty.
Clean the mirror surface
gently, using a soft dry cloth.
Sunlight or headlights are shining
directly into the Digital Rearview
Mirror.
Change to optical mirror
mode.
(If the light is coming through
the moon roof, close the sun-
shade.)
• The vehicle is in a dark area.
• The vehicle is near a TV tower,
broadcasting station, electric
power plant, or other location
where strong radio waves or
electrical noise may be pres-
ent.
• The temperature around the
camera is extremely high/low.
• The ambient temperature is
extremely low.
• It is raining or humid.
• Sunlight or headlights are shin-
ing directly into the camera
lens.
• The vehicle is under fluores-
cent lights, sodium lights, mer-
cury lights, etc.
• Exhaust gas is obstructing the
camera.
Change to optical mirror
mode.
(Change back to digital mir-
ror mode when the condi-
tions have improved.)
149
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
The image is difficult to
see.
Foreign matters (such as water
droplets, snow, mud, etc.) is on
the camera lens.
Operate the dedicated
camera cleaning washer
and clean the camera lens.
(
Change to optical mirror
mode.
Rinse the camera with a
large quantity of water,
wipe it clean with a soft
cloth dampened with water,
and then change back to
digital mirror mode.
The image is out of
alignment.
The trunk is not fully closed.
Fully close the trunk.
The camera or its surrounding
area has received a strong
impact.
Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.
The display is dim and
is displayed.
The system may be malfunction-
ing.
Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.
goes off.
Symptom
Likely cause
Solution
150
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
is displayed.
The Digital Rearview Mirror is
extremely hot.
(The display will gradually
become more dim. If the tem-
perature continues to increase,
the Digital Rearview Mirror will
turn off.)
Reducing the cabin tempera-
ture is recommended to
reduce the temperature of
the mirror.
(
will disappear when the
mirror becomes cool.)
If
does not disappear
even though the mirror is
cool, have the vehicle
inspected by your Lexus
dealer.
The lever cannot be
operated properly.
The lever may be malfunctioning.
Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.
(To change to optical mirror
mode, press and hold the
menu button for approxi-
mately 10 seconds.)
Symptom
Likely cause
Solution
151
3-4. Adjusting the steering wheel and mirrors
LEXUS LS500h Owner's Manual
3
Be
fore
dri
ving
1
To select a mirror to adjust, press
the switch.
The indicator comes on.
Left
Right
Pressing the same switch again will put the
switch in neutral.
2
To adjust the mirror, press the
switch.
Up
Right
Down
Left
■
Mirror angle can be adjusted when
The power switch is in ACCESSORY or
ON mode.
■
Defogging the mirrors
The outside rear view mirrors can be
cleared using the mirror defoggers. Turn on
the rear window defogger to turn on the
outside rear view mirror defoggers.
(
■
Auto anti-glare function
When the anti-glare inside rear view mirror
is set to automatic mode, the outside rear
view mirrors will activate in conjunction with
the anti-glare inside rear view mirror to
reduce reflected light. (
■
Automatic adjustment of the mirror
angle
A desired mirror face angle can be entered
to memory and recalled automatically by
the driving position memory. (
■
Linked mirror function when reversing
When either “L” or “R” of the mirror select
switch is selected, the outside rear view mir-
rors will automatically angle downwards
when the vehicle is reversing in order to
give a better view of the ground.
To disable this function, select neither “L”
Outside rear view mirrors
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
WARNING
■
Important points while driving
Observe the following precautions while
driving.
Failure to do so may result in loss of con-
trol of the vehicle and cause an accident,
resulting in death or serious injury.
●
Do not adjust the mirrors while driving.
●
Do not drive with the mirrors folded.
●
Both the driver and passenger side
mirrors must be extended and prop-
erly adjusted before driving.
Adjustment procedure
A
B
A
B
C
D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст