Lexus ES300 (2002 year). Manual — part 449
Lexus Special Service Campaign 1LG
23
4. COMPLETE POSTCARD AND MAIL
(a) After completing the postcard, make a copy of
it and staple it to the dealership copy of the
Repair Order. This will assure you are able to
provide the information in the future if the
postcard is not received by Lexus.
(b) Mail the
Airbag Serial Number Registration
postcard
to Lexus to assure it is properly
registered.
(c)
Additional postcards, in packs of 50
(P/N 00410 − 92005), may be ordered
through the non−parts system on the TDN
system.
NOTE:
The VIN will not be preprinted on the
postcards ordered from the MDC. Please
assure that the VIN is recorded on the
postcard.
5. INSTALLING THE NEW STEERING WHEEL
PAD
(a) Connect the 2 airbag connectors.
(b) Install the new steering wheel pad after
confirming that the circumference groove of
the Torx
screws are caught in the screw
case.
(c) Using a T30 Torx
socket, tighten the 2
screws.
Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
(d) Reinstall the No. 2 and No. 3 covers.
(e) Reconnect the negative (−) battery terminal.
6. CHECK SRS WARNING LIGHT
(a) Turn ignition switch to the ON or ACC
position and check that the SRS warning light
illuminates.
(b) Verify that the SRS warning light goes out
after approximately 6 seconds.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст