Lexus LC Cabriolet (2021 year). Manual in english — page 14
304
5-2. Lexus Climate Concierge
5-2.Lexus Climate Concierge
Select
The indicator on the Lexus Climate Con-
cierge control screen illuminates, and the
automatic air conditioning system, seat
heaters and ventilators, heated steering
wheel, and neck heaters operate in auto-
matic mode.
If any of the system is operated manually,
the indicator turns off. However, all other
functions continue to operate in automatic
mode.
Q
When using the Lexus Climate Con-
cierge
Lexus Climate Concierge can be operated
on the sub function menu or option control
screen. (
P.309)
Q
Automatic air conditioning system
(
P.306)
The temperature can be adjusted indi-
vidually for the driver seat and passen-
ger seat.
Q
Seat heaters and ventilators
(
P.314)
Heating or ventilation is automatically
selected according to the set tempera-
ture of the air conditioning system, the
outside temperature, opening/closing
status of the soft top roof, etc.
The seat heater and ventilator of the
front passenger seat operate in auto-
matic mode if a passenger is detected.
Q
Heated steering wheel (if
equipped) (
P.314)
Heated steering wheel operates auto-
matically according to the set tem-
perature of the air conditioning system,
the outside temperature, open-
Lexus Climate Concierge
The seat heaters, seat ventilators,
heated steering wheel (if equipped)
and neck heaters (if equipped) are
each automatically controlled
according to the set temperature of
the air conditioning system, the out-
side and cabin temperature, etc.
Lexus Climate Concierge allows a
comfortable condition to be main-
tained without adjusting each sys-
tem.
Press the “MENU” button on the
Remote Touch and select “Cli-
mate” to display the air condition-
ing control screen. Then, select
on the sub menu (
P.309) to dis-
play the Lexus Climate Concierge
control screen.
Turning on Lexus Climate Con-
cierge
Operation of each system
305
5
5-2. Lexus Climate Concierge
In
te
rior f
eat
ur
es
ing/closing status of the soft top roof,
etc.
Q
Neck heaters (if equipped)
(
P.314)
Temperature and fan speed of the
neck heater are changed automatically
according to the set temperature of the
air conditioning system, the outside
temperature, opening/closing status of
the soft top roof, vehicle speed, etc.
The neck heater of the front passenger
seat operate in automatic mode if a
passenger is detected.
Q
Seat heater/ventilator/neck heater
operation
When automatic mode is selected using the
seat heater/ventilator switch, passenger
detection is not performed.
306
5-3. Using the air conditioning system
5-3.Using the air conditioning system
Automatic mode switch
Off switch
Left-hand side temperature control switch
Fan speed control switch
Outside/recirculated air mode switch
Right-hand side temperature control switch
Windshield defogger switch
Rear window and outside rear view mirror defoggers switch
Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the tem-
perature setting or opening/closing state of the soft top roof.
Press the “MENU” button on the Remote Touch, then select “Climate” to dis-
play the air conditioning control screen. (
P.301)
The air conditioning system can be displayed and operated on the side display.
The illustrations below are for left-hand drive vehicles.
The button positions and shapes will differ for right-hand drive vehicles.
Air conditioning controls
A
B
C
D
E
F
G
H
307
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
Q
Adjusting the temperature
Operate the temperature control
switch upwards to increase the tem-
perature and downwards to decrease
the temperature.
If the “A/C” indicator is turned off, the sys-
tem will blow ambient temperature air or
heated air.
Q
Setting the fan speed
Operate the fan speed control switch
upwards to increase the fan speed and
downwards to decrease the fan speed.
Press the off switch to turn the fan off.
Q
Changing the air flow mode
P.309
Q
Switching between outside air and
recirculated air modes
Operate the outside/recirculated air
mode switch upwards or downwards.
The mode changes as follows each time
the switch is operated.
automatic mode
(outside air
mode)
(recirculated air mode)
automatic mode
When the system is switched to automatic
mode, the air conditioning system oper-
ates automatically.
Q
Defogging the windshield
Defoggers are used to defog the wind-
shield and front side windows.
Press the windshield defogger switch.
Set the outside/recirculated air mode
switch to outside air mode if the recircu-
lated air mode is used. (It may switch auto-
matically.)
To defog the windshield and the side win-
dows early, turn the air flow and tempera-
ture up.
To return to the previous mode, press the
windshield defogger switch again when the
windshield is defogged.
Q
Defogging the rear window and
outside rear view mirrors
Defoggers are used to defog the rear
window, and to remove raindrops, dew
and frost from the outside rear view
mirrors.
Press the rear window and outside
rear view mirror defoggers switch.
The defoggers will automatically turn off
after 15 to 60 minutes. The operation time
changes according to the ambient tem-
perature and vehicle speed.
Q
Windshield wiper de-icer (if
equipped)
P.311
Q
Blower customization
P.311
Q
Fogging up of the windows
The windows will easily fog up when the
humidity in the vehicle is high. Turning
“A/C” on will dehumidify the air from the
outlets and defog the windshield effectively.
O
If you turn “A/C” off, the windows may
fog up more easily.
O
The windows may fog up if the recircu-
lated air mode is used.
Q
When driving on dusty roads
Close all windows. If dust thrown up by the
vehicle is still drawn into the vehicle after
closing the windows, it is recommended
that the air intake mode be set to outside air
mode and the fan speed to any setting
except off.
308
5-3. Using the air conditioning system
Q
Outside/recirculated air mode
O
Setting to the recirculated air mode tem-
porarily is recommended in preventing
dirty air from entering the vehicle interior
and helping to cool the vehicle when the
outside air temperature is high.
O
Outside/recirculated air mode may
automatically switch depending on the
temperature setting or the inside tem-
perature.
Q
Registering air conditioning settings to
electronic keys
O
Unlocking the vehicle using an electronic
key and turning the engine switch to ON
will recall that key’s registered air condi-
tioning settings.
O
When the engine switch is turned off, the
current air conditioning settings will auto-
matically be registered to the electronic
key that was used to unlock the vehicle.
O
The system may not operate correctly if
more than one electronic key is in the
vicinity or if the smart entry & start system
is used to unlock the passenger door.
O
The doors that can recall the air condi-
tioning setting
*
when unlocked using the
smart entry & start system can be
changed. For details, contact any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
*
: The doors that can recall the driving posi-
tion memory are changed at the same
time.
Q
Operation of the air conditioning sys-
tem in Eco drive mode
In Eco drive mode, the air conditioning sys-
tem is controlled as follows to prioritize fuel
efficiency:
O
Engine speed and compressor operation
controlled to restrict heating/cooling
capacity
O
Fan speed restricted when automatic
mode is selected
To improve air conditioning performance,
perform the following operations:
O
Adjust the fan speed
O
Turn off Eco drive mode (
P.262)
Q
When the outside temperature falls to
nearly 0°C (32°F)
The dehumidification function may not
operate even when “A/C” is selected.
Q
Ventilation and air conditioning odors
O
To let fresh air in, set the air conditioning
system to the outside air mode.
O
During use, various odors from inside
and outside the vehicle may enter into
and accumulate in the air conditioning
system. This may then cause odor to be
emitted from the vents.
O
To reduce potential odors from occur-
ring:
• It is recommended that the air condition-
ing system be set to outside air mode
prior to turning the vehicle off.
• The start timing of the blower may be
delayed for a short period of time imme-
diately after the air conditioning system is
started in automatic mode.
O
When parking, the system automatically
switches to fresh air intake mode to
encourage better air circulation through-
out the vehicle, helping to reduce odors
that occur when starting the vehicle.
Q
Air conditioning filter
P.368
Q
Customization
Settings (e.g. A/C auto switch operation)
can be changed.
(Customizable features
P.435)
WARNING
Q
To prevent the windshield from fog-
ging up
Do not use the windshield defogger
switch during cool air operation in
extremely humid weather. The difference
between the temperature of the outside
air and that of the windshield can cause
the outer surface of the windshield to fog
up, blocking your vision.
309
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
Q
Main control screen
Using the touchpad of the Remote
Touch, select the button on the screen.
to
can be adjusted by perform-
ing the following operations.
Flick operation: Move the pointer to
the desired item and flick the touchpad
up or down.
The item can be adjusted by one level.
Trace operation: After selecting the
desired item, trace the pad surface.
The item can be adjusted by the amount
that you trace.
Trace operation cannot be used while driv-
ing.
Sub menu
Selecting the sub menu item to switch the
main screen.
: Display the air conditioning control
screen
: Display the heated steering wheel (if
equipped)/seat heater/seat ventilator con-
trol screen (
P.314)
: Display the neck heater control
screen (if equipped) (
P.314)
: Display the Lexus Climate Con-
cierge control screen (
P.304)
: Display the option control screen
Adjust the left-hand side tempera-
ture setting
Adjust the fan speed setting
Select the air flow mode
: Air flows to the upper body
: Air flows to the upper body and
feet
: Air flows to the feet
: Air flows to the feet and the wind-
shield defogger operates
WARNING
Q
When the outside rear view mirror
defoggers are operating
Do not touch the outside rear view mir-
ror surfaces, as they can become very
hot and burn you.
NOTICE
Q
To prevent battery discharge
Do not leave the air conditioning system
on longer than necessary when the
engine is off.
Air conditioning control screen
B
E
A
B
C
D
310
5-3. Using the air conditioning system
Adjust the right-hand side tem-
perature setting
Function on/off indicators
When the function is on, the indicator illu-
minates on the control screen.
Sub function menu
When the sub function button on the
Remote Touch is pressed, the following
functions can be switched on and off.
: Set Lexus Climate Concierge
(
P.304)
“AUTO”: Set automatic mode on/off
(
P.312)
“Off”: Turn the fan off
“A/C”: Set cooling and dehumidification
function
“DUAL”: Adjust the temperature for driver
and passenger seats separately (“DUAL”
mode) (
P.313)
: Changing the fan speed setting
during the automatic mode operation
(Blower customization)
Q
Option control screen
Select
on the sub menu to display
the option control screen.
The functions can be switched on and off.
When the function is on, the indicator illu-
minates on the screen.
Set Lexus Climate Concierge
(
P.304)
Adjusting the temperature for
driver and passenger seats sepa-
rately (“DUAL” mode) (
P.313)
Cooling and dehumidification func-
tion
nanoe™
*
system on/off
Prevent ice from building up on the
windshield and wiper blades
(Windshield wiper de-icer) (if
equipped)
Removing pollen from the air (Pol-
len removal mode)
*
: nanoe™ and the nanoe™ mark are
trademarks of Panasonic Corporation.
Q
Side display
Display the heated steering
wheel/seat heaters/seat ventilators
control screen (if equipped)
(
P.315)
Adjust the left-hand side tempera-
ture setting
Adjust the fan speed setting
Adjust the right-hand side tem-
perature setting
E
F
G
A
B
C
D
E
F
A
B
C
D
311
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
Set cooling and dehumidification
function on/off
Adjust the temperature for the
driver’s and front passenger’s seats
separately (“DUAL” mode)
(
P.313)
Select the air flow mode
Q
Windshield wiper de-icer (if equipped)
This feature is used to prevent ice from
building up on the windshield and wiper
blades.
The windshield de-icer will automatically
turn off after approximately 15 minutes.
Q
Blower customization
Fan speed setting during the automatic
mode operation can be customized.
Each time
is selected, the fan speed
setting mode changes as follows.
“NORMAL”
“ECO”
“FAST”
“NORMAL”
Q
Pollen removal mode
Outside air mode switches to
(recirculated air) mode. Pollen is removed
from the air and the air flows to the upper
part of the body.
Usually the system will automatically turn
off after approximately 1 to 3 minutes.
In order to prevent the windshield from fog-
ging up when the outside air is cold, the
dehumidification function may operate or
the outside/recirculated air mode may not
switch to
(recirculated air) mode.
Pollen is filtered even if the pollen removal
mode is turned off.
Q
nanoe™ system
This vehicle incorporates a biocidal prod-
uct.
Ionised air generated by a device incorpo-
rated in the vehicle purifies the air in the
cabin by suppressing bacteria.
Active substance: Free radicals generated
in situ from ambient air or water
nanoe™ helps to provide purified air by
emitting electrically charged water parti-
cles through the front center vent on the
driver’s side
*
.
O
When the fan is turned on and nanoe™
on the option control screen is selected,
the nanoe™ system is activated.
O
When the fan is operated in the following
conditions, system performance will be
maximized. If the following conditions are
not met, performance will be limited.
• The ,
or
air
outlets
are
being used.
• The front center vent on driver’s side is
open.
O
When nanoe™ is generated, a small
amount of ozone is emitted and may be
faintly smelled in some situations. How-
ever, this is approximately the same as
the amount that already exists in nature,
such as in forests, and it has no affect on
the human body.
O
A slight noise may be heard during oper-
ation. This is not a malfunction.
*
: According to temperature and humidity
conditions, fan speed and direction of the
air flow, the nanoe™ system may not
operate at full capacity.
E
F
G
WARNING
Q
To prevent burns (vehicles with wind-
shield wiper de-icer)
Do not touch the glass at lower part of
the windshield or to the side of the front
pillars when the windshield wiper de-icer
is on.
312
5-3. Using the air conditioning system
1
Press the automatic mode switch
or select “AUTO” on the sub func-
tion menu. (
P.309)
2
Press the outside/recirculated air
mode switch to switch to automatic
air intake mode.
The air conditioning system automatically
switches between outside air and recircu-
lated air modes.
3
Adjust the temperature setting.
4
To stop the operation, press the off
switch or select “Off” on the sub
function menu. (
P.309)
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
Q
Using automatic mode
O
Fan speed is adjusted automatically
according to the temperature setting and
the ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after the automatic mode switch is
pressed or “AUTO” is selected.
O
Cool air may blow around the upper
body even when the heater is on due to
sunlight.
O
When the soft top roof is opened, the fan
speed and air outlets may be automati-
cally changed according to the sunlight
or vehicle speed.
Q
Windshield fog detection function
When automatic mode is set, the humidity
sensor detects fog on the windshield and
controls the air conditioning system to pre-
vent fog.
Q
Automatic mode for air intake control
In automatic mode, the system detects
exhaust gas and other pollutants and auto-
matically switches between outside air and
recirculated air modes.
When the dehumidification function is off,
and the fan is operating, turning automatic
mode on will activate the dehumidification
function.
WARNING
Q
nanoe™ generator
Do not disassemble or repair the gener-
ator because it contains high voltage
parts. Contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer if the generator
needs repair.
NOTICE
Q
To prevent damage to the nanoe™
Do not insert anything into the driver’s
side vent, attach anything to it, or use
sprays around the driver’s side vent.
These things may cause the generator
not to work properly.
Using automatic mode
NOTICE
Q
Humidity sensor
In order to detect fog on the windshield,
a sensor which monitors the temperature
of the windshield, the surround humidity,
etc. is installed.
Follow these points to avoid damaging
the sensor:
O
Do not disassemble the sensor
O
Do not spray the glass cleaner on the
sensor or subject it to strong impacts
313
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
To turn on the “DUAL” mode, perform
any of the following procedures:
Select “DUAL” on the sub function
menu. (
P.309)
Select “DUAL” on the option con-
trol screen.
Adjust the passenger’s side tem-
perature setting.
The indicator on the main control screen
comes on when the “DUAL” mode is on.
Q
Location of air outlets
The air outlets and air volume changes
according to the selected air flow
mode.
Q
Adjusting the air flow direction and
opening/closing the air outlets
Center/side
1
Direct air flow to the left or right, up
or down
2
Turn the knob to open or close the
vent
Above the glove box
1
Direct air flow to the left or right, up
or down
2
Move the knob to the most outside
position to close the vent
NOTICE
O
Do not stick anything on the sensor
Adjusting the temperature for
driver and passenger seats sepa-
rately (“DUAL” mode)
Air outlet layout and operations
314
5-3. Using the air conditioning system
Q
If an object falls into the air outlet above
the glove box
Remove the panel inside the glove box to
take out the object. (
P.368)
*
: If equipped
WARNING
Q
To prevent the windshield defogger
from operating improperly
Do not place anything on the instrument
panel which may cover the air outlets.
Otherwise, air flow may be obstructed,
preventing the windshield defoggers
from defogging.
Heated steering wheel
*
/seat
heaters/seat ventila-
tors/neck heaters
*
Heated steering wheel
Warms up the grip of the steering
wheel
Seat heaters
Warm up the seat upholstery
Seat ventilators
Maintain good air flow on the seat
upholstery by sucking air into the
seats
Press the “MENU” button on the
Remote Touch and select “Cli-
mate” to display the air condition-
ing control screen. Then, select
on the sub menu (
P.309) to dis-
play the heated steering
wheel/seat heaters/seat ventila-
tors control screen.
Neck heaters
Warm up the head restraints near
the neck by blowing the warm air
from the air outlet on the head
restraints
Press the “MENU” button on the
Remote Touch and select “Cli-
mate” to display the air condition-
ing control screen. Then, select
on the sub menu (
P.308) to dis-
play the neck heaters control
screen.
315
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
Q
Main display
Using the touchpad of the Remote
Touch, select the button on the screen.
Except the neck heaters
to
can be adjusted by perform-
ing the following operations.
Flick operation: Move the pointer to
the desired item and flick the touchpad
up or down.
The item can be adjusted by one level.
Trace operation: After selecting the
desired item, trace the pad surface.
The item can be adjusted by the amount
that you trace.
Trace operation cannot be used while driv-
ing.
Adjust the seat ventilator fan speed
level
The seat ventilator can be adjusted in 3
levels.
When the seat ventilator is operated, the
fan speed level is displayed on the screen.
WARNING
Q
To prevent minor burn injuries
Care should be taken if anyone in the fol-
lowing categories comes in contact with
the steering wheel, seats or neck heaters
when the heater is on:
O
Babies, small children, the elderly, the
sick and the physically challenged
O
Persons with sensitive skin
O
Persons who are fatigued
O
Persons who have taken alcohol or
drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
Q
To prevent burns and fire
Do not put fingers or foreign matters into
the air outlets or intake vents. Doing so
may cause burns or fire.
NOTICE
Q
To prevent damage to the seat heat-
ers and seat ventilators
Do not put heavy objects that have an
uneven surface on the seat and do not
stick sharp objects (needles, nails, etc.)
into the seat.
Q
To prevent damage to the neck heat-
ers
Do not block the air outlets or intake
vents of the neck heaters. If the air outlets
or intake vents become blocked, heat is
accumulated and the neck heaters may
be damaged.
Q
To prevent battery discharge
Do not use the functions when the
engine is off.
Control screen
A
C
A
316
5-3. Using the air conditioning system
Adjust the seat heater temperature
level
The seat heater can be adjusted in 3 levels.
When the seat heater is operated, the tem-
perature level is displayed on the screen.
Adjust the heated steering wheel
temperature level
The heated steering wheel can be adjusted
in 2 levels.
When the heated steering wheel is oper-
ated, the temperature level is displayed on
the screen.
Automatic mode on/off indicators
When the automatic mode is on, the indi-
cator illuminates on the screen.
Sub function menu
When the sub function button on the
Remote Touch is pressed, the following
functions can be set to automatic mode.
: Left-hand side seat heater/seat
ventilator
: Heated steering wheel
: Right-hand side seat heater/seat
ventilator
Neck heaters
can be adjusted by performing the
following operations.
Flick operation: Move the pointer to
the desired item and flick the touchpad
up or down.
The item can be adjusted by one level.
Trace operation: After selecting the
desired item, trace the pad surface.
The item can be adjusted by the amount
that you trace.
Trace operation cannot be used while driv-
ing.
Adjust the neck heater fan speed
level
The neck heater can be adjusted in 3 lev-
els.
When the neck heater is operated, the fan
speed level is displayed on the screen.
Automatic mode on/off indicators
When the automatic mode is on, the indi-
cator illuminates on the screen.
Sub function menu
When the sub function button on the
Remote Touch is pressed, the following
functions can be set to automatic mode.
: Left-hand side neck heater
: Right-hand side neck heater
Q
Side display
Display the air conditioning control
screen (
P.309)
B
C
D
E
A
A
B
C
A
317
5
5-3. Using the air conditioning system
In
te
rior f
eat
ur
es
Adjust the seat heater temperature
level
Each time the switch is selected, the tem-
perature level and level indicator (orange)
change as follows:
AUTO
Hi
Mid
Lo
Off
Adjust the seat ventilator fan speed
level
Each time the switch is selected, the fan
speed level and level indicator (blue)
change as follows:
AUTO
Hi
Mid
Lo
Off
Adjust the heated steering wheel
temperature level
Each time the switch is selected, the tem-
perature level and level indicator change
as follows:
AUTO
Hi
Lo
Off
Q
The heated steering wheel, seat heaters
and seat ventilators can be used when
The engine switch is in ON.
Q
Air conditioning system-linked control
mode
When the seat ventilator fan speed level is
Hi, the seat ventilator fan speed may
become higher according to the fan speed
of the air conditioning system.
Q
Customization
Steering wheel heating preference in auto-
matic mode and the automatic mode set-
tings for the seat heaters and ventilators can
be changed.
(Customizable features:
P.435)
*
: If equipped
Q
Location of the neck heater air out-
let
Q
Adjusting the air flow direction
WARNING
Q
To prevent overheating and minor
burn injuries
Observe the following precautions when
using the seat heaters.
B
C
D
O
Do not cover the seat with a blanket or
cushion when using the seat heater.
O
Do not use seat heater more than nec-
essary.
Location and operation of the
neck heaters
*
air outlet
318
5-4. Using the interior lights
5-4.Using the interior lights
Outside door handle lights
Personal lights (
P.319)
Seat lights
Shift lever light
Door trim ornament lights
Door courtesy lights
Footwell lights
Q
Personal lights automatic on/off
O
Illuminated entry system: The lights auto-
matically turn on/off according to the
engine switch mode, the presence of the
electronic key, whether the doors are
locked/unlocked, and whether the doors
are opened/closed.
O
If the personal lights remain on when the
engine switch is turned off, the lights will
go off automatically after 20 minutes.
Q
When personal lights do not respond as
normal
O
When water, dirt, etc., have adhered to
the lens surface
O
When operated with a wet hand
O
When wearing gloves, etc.
Interior lights list
Location of the interior lights
A
B
C
D
E
F
G
319
5
5-4. Using the interior lights
In
te
rior f
eat
ur
es
Q
The interior lights will turn on automati-
cally when
If any of the SRS airbags deploy (inflate) or
in the event of a strong rear impact, the
interior lights will turn on automatically. The
interior lights will turn off automatically after
approximately 20 minutes.
The interior lights can be turned off manu-
ally. However, in order to help prevent fur-
ther collisions, it is recommended that they
be left on until safety can be ensured. (The
interior lights may not turn on automatically
depending on the force of the impact and
conditions of the collision.)
Q
Customization
Setting (e.g. the time elapsed before lights
turn off) can be changed.
(Customizable features:
P.435)
Q
Turning the door position on
Press the door-linked personal light
switch
The lights are turned on and off according
to whether the doors are opened/closed.
When the door position is on, the indicator
illuminates.
Q
Turning the lights on/off
Touch the light
When a door is opened while the door
position is on, the lights turn on.
NOTICE
Q
Removing light lenses
Never remove the lens for the personal
lights. Otherwise, the lights will be dam-
aged.
Q
To prevent battery discharge
Do not leave the lights on longer than
necessary when the engine is off.
Operating the personal lights
A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст