LEXUS LC 500H (2019 year). Instruction — part 8
122
3-3. Adjusting the seats
1
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
2
Check that the shift position is in P.
3
Adjust the driver’s seat, steering
wheel, outside rear view mirrors
and head-up display to the desired
positions.
4
While pressing the “SET” button, or
within 3 seconds after the “SET”
button is pressed, press button “1”,
“2” or “3” until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
WARNING
■
Lever-operated “Front, Fold &
Return” seat
●
Before operating the lever-operated
“Front, Fold & Return” seat, ensure that
any surrounding passengers or objects
will not contact the seat.
●
Make sure the seatback is locked
securely before driving.
●
Never operate the lever-operated
“Front, Fold & Return” seat while the
vehicle is moving.
■
Jam protection function
Do not use a hand, foot, or any other part
of your body to intentionally activate the
jam protection function.
Driving position memory
This feature automatically adjusts
the positions of the driver’s seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to suit your preferences.
Up to 3 different driving positions
can be recorded.
Each electronic key (including a
card key) can be registered to
recall your preferred driving posi-
tion.
Recording a driving position into
memory
123
3-3. Adjusting the seats
3
Be
fore
dri
ving
will be overwritten.
■
Seat positions that can be memorized
(
The adjusted positions other than the posi-
tion adjusted by lumbar support switch can
be recorded.
■
In order to correctly use the driving
position memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
1
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
2
Check that the shift position is in P.
3
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■
To stop the position recall operation
part-way through
Perform any of the following:
●
Press the “SET” button.
●
Press button “1”, “2” or “3”.
●
Operate any of the seat adjustment
switches (only cancels seat position
recall).
●
Operate the tilt and telescopic steering
control switch (only cancels steering
wheel position recall).
■
Operating the driving position memory
after turning the engine switch <power
switch> off
Recorded seat positions can be activated
up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is
closed again.
■
Registering procedure
Record your driving position to button
“1”, “2” or “3” before performing the
following:
Carry only the key you want to register,
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that
the seat does not strike the rear passen-
ger or squeeze your body against the
steering wheel.
Recalling a driving position
Registering/canceling/recall a
driving position to an electronic
key (including a card key) (mem-
ory recall function)
124
3-3. Adjusting the seats
and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
2
Check that the shift position is in P.
3
Recall the driving position that you
want to record.
4
While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■
Cancelation procedure
1
Carry only the key you want to can-
cel and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled prop-
erly.
2
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
3
While pressing the “SET” button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■
Recall procedure
1
Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver’s door using the
smart access system with push-but-
ton start or wireless remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel and head-up display).
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the engine switch <power
switch> to ACCESSORY mode or
IGNITION ON mode <ON
mode>.
The steering wheel and head-up display
will move to the recorded position.
■
Recalling the driving position using the
memory recall function
●
Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If the passenger’s door is unlocked with
the smart access system with push-but-
ton start, the driving position cannot be
recalled. In this case, press the driving
position button which has been set.
■
Customization
The unlock door settings of the memory
recall function can be changed.
(Customizable features:
125
3-3. Adjusting the seats
3
Be
fore
dri
ving
Manual type
1
Up
Pull the head restraints up.
2
Down
Push the head restraint down while press-
ing the lock release button
.
Power type
1
Up
2
Down
■
Adjusting the height of the head
restraints
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
Pull the head restraint up while press-
ing the lock release button
.
If the head restraint touches the ceiling,
making the removal difficult, change
the seat height or angle. (
Head restraints
Head restraints are provided for
front seats.
WARNING
■
Head restraint precautions
Observe the following precautions
regarding the head restraints. Failure to
do so may result in death or serious
injury.
●
Adjust the head restraints to the cor-
rect position at all times.
●
Manual type: After adjusting the head
restraints, push down on them and
make sure they are locked in position.
●
Manual type: Do not drive with the
head restraints removed.
Vertical adjustment
A
Removing the head restraints
(manual type only)
A
126
3-3. Adjusting the seats
■
Removing the head restraints (power
type only)
For removing and installation of the head
restraint, contact your Lexus dealer.
Align the head restraint with the instal-
lation holes and push it down to the
lock position.
Press and hold the lock release button
when lowering the head restraint.
Installing the head restraints
(manual type only)
A
127
3-4. Adjusting the steering wheel and mirrors
3
Be
fore
dri
ving
3-4.Adjusting the steering wheel and mirrors
Operating the switch moves the steer-
ing wheel in the following directions:
1
Up
2
Down
3
Toward the driver
4
Away from the driver
■
The steering wheel can be adjusted
when
The engine switch <power switch> is in
ACCESSORY or IGNITION ON mode
<ON mode>.
■
Automatic adjustment of the steering
position
A desired steering position can be entered
to memory and recalled automatically by
the driving position memory system.
(
■
Enabling easier driver entry and exit
(auto tilt away)
When the engine switch <power switch> is
turned off, the steering wheel returns to its
stowed position by moving up and away.
Turning the engine switch <power switch> to
ACCESSORY or IGNITION ON mode
<ON mode> will return the steering wheel
to the original position.
■
Customization
The auto tilt away function can be changed.
(Customizable features:
Press on or close to the
mark.
Steering wheel
Adjustment procedure
WARNING
■
Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury.
Sounding the horn
128
3-4. Adjusting the steering wheel and mirrors
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
Turn the automatic anti-glare function
mode on/off
When the automatic anti-glare function is
in ON mode, the indicator
illuminates.
The function will set to ON mode each
time the engine switch <power switch> is
turned to IGNITION ON mode <ON
mode>.
Pressing the button turns the function to
OFF mode. (The indicator
also turns
off.)
■
To prevent sensor error
To ensure that the sensors operate properly,
do not touch or cover them.
Inside rear view mirror
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
WARNING
■
Caution while driving
Do not adjust the position of the mirror
while driving.
Doing so may lead to mishandling of the
vehicle and cause an accident, resulting
in death or serious injury.
Anti-glare function
A
A
129
3-4. Adjusting the steering wheel and mirrors
3
Be
fore
dri
ving
1
To select a mirror to adjust, press
the switch.
The indicator comes on.
Left
Right
Pressing the same switch again will put the
switch in neutral.
2
To adjust the mirror, press the
switch.
Up
Right
Down
Left
■
Mirror angle can be adjusted when
The engine switch <power switch> is in
ACCESSORY or IGNITION ON mode
<ON mode>.
■
Defogging the mirrors
The outside rear view mirrors can be
cleared using the mirror defoggers. Turn on
the rear window defogger to turn on the
outside rear view mirror defoggers.
(
■
Auto anti-glare function
When the anti-glare inside rear view mirror
is set to automatic mode, the outside rear
view mirrors will activate in conjunction with
the anti-glare inside rear view mirror to
reduce reflected light. (
■
Automatic adjustment of the mirror
angle
A desired mirror face angle can be entered
to memory and recalled automatically by
the driving position memory. (
Outside rear view mirrors
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
WARNING
■
Important points while driving
Observe the following precautions while
driving.
Failure to do so may result in loss of con-
trol of the vehicle and cause an accident,
resulting in death or serious injury.
●
Do not adjust the mirrors while driving.
●
Do not drive with the mirrors folded.
●
Both the driver and passenger side
mirrors must be extended and prop-
erly adjusted before driving.
Adjustment procedure
A
B
A
B
C
D
130
3-4. Adjusting the steering wheel and mirrors
■
Using the switch
Press the switch to fold the mirrors.
Press it again to extend them to the original
position.
■
Setting automatic mode
Automatic mode allows the folding or
extending of the mirrors to be linked to
locking/unlocking of the doors.
Press the “AUTO” switch to set auto-
matic mode.
The indicator
will come on.
Pressing the switch once more will return
to manual mode.
■
When disconnecting and reconnecting
12-volt battery terminals
The automatic folding/extending mirror
function will return to off as default. To turn
the function on, press the switch again to
select on.
■
Using automatic mode in cold weather
When automatic mode is used in cold
weather, the door mirror could freeze up
and automatic stowing and return may not
be possible. In this case, remove any ice and
snow from the door mirror, then either
operate the mirror using manual mode or
move the mirror by hand.
■
Customization
The automatic mirror folding and extending
operation can be changed.
(Customizable features:
When either “L” or “R” of the mirror
select switch is selected, the outside
rear view mirrors will automatically
angle downwards when the vehicle is
reversing in order to give a better view
of the ground.
WARNING
■
When the outside rear view mirror
defoggers are operating
Do not touch the outside rear view mir-
ror surfaces, as they can become very
hot and burn you.
Folding and extending the mir-
rors
A
WARNING
■
When a mirror is moving
To avoid personal injury and mirror mal-
function, be careful not to get your hand
caught by the moving mirror.
Linked mirror function when
reversing
131
3-4. Adjusting the steering wheel and mirrors
3
Be
fore
dri
ving
To disable this function, select neither
“L” nor “R”.
■
Adjusting the mirror angle when
the vehicle is reversing
With the shift position in R, adjust the
mirror angle at a desired position.
The adjusted angle will be memorized
and the mirror will automatically tilt to
the memorized angle whenever the
shift position is shifted to R from next
time.
The memorized downward tilt position of
the mirror is linked to the normal position
(angle adjusted with the shift position in
other than R). Therefore, if the normal posi-
tion is changed after adjustment, the tilt
position will also change.
When the normal position is changed,
readjust the angle in reversing.
132
3-5. Opening and closing the windows
3-5.Opening and closing the windows
The power windows can be opened
and closed by one-touch operation of
the switches.
1
Closing
2
One-touch closing
*
3
Opening
4
One-touch opening
*
*
: To stop the window partway, operate the
switch in the opposite direction.
■
The power windows can be operated
when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
■
Operating the power windows after
turning the engine <hybrid system> off
The power windows can be operated for
approximately 45 seconds after the engine
switch <power switch> is turned to ACCES-
SORY mode or turned off. They cannot,
however, be operated once either door is
opened.
■
Jam protection function
If an object becomes jammed between the
window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
■
Catch protection function
If an object becomes caught between the
door and window while the window is open-
ing, window movement is stopped.
■
When the window cannot be opened or
closed
When the jam protection function or catch
protection function operates unusually and
the door window cannot be opened or
closed, perform the following operations
with the power window switch of that door.
●
Stop the vehicle. With the engine switch
<power switch> in IGNITION ON mode
<ON mode>, within 4 seconds of the jam
protection function or catch protection
function activating, continuously operate
the power window switch in the one-
touch closing direction or one-touch
opening direction so that the door win-
dow can be opened and closed.
●
If the door window cannot be opened
and closed even when performing the
above operations, perform the following
procedure for function initialization.
1
Close both side doors.
2
Turn the engine switch <power switch>
to IGNITION ON mode <ON mode>.
3
Pull and hold the power window switch
in the one-touch closing direction and
completely close the door window.
4
Release the power window switch for a
moment, resume pulling the switch in
the one-touch closing direction, and
hold it there for approximately 6 sec-
onds or more.
5
Press and hold the power window
switch in the one-touch opening direc-
tion. After the door window is com-
pletely opened, continue holding the
switch for an additional 1 second or
more.
6
Release the power window switch for a
moment, resume pushing the switch in
the one-touch opening direction, and
hold it there for approximately 4 sec-
onds or more.
7
Pull and hold the power window switch
in the one-touch closing direction
again. After the door window is com-
Power windows
Opening and closing the power
windows
133
3-5. Opening and closing the windows
3
Be
fore
dri
ving
pletely closed, continue holding the
switch for a further 1 second or more.
If you release the switch while the window is
moving, start again from the beginning.
If the window reverses and cannot be fully
closed or opened, have the vehicle
inspected by your Lexus dealer.
■
Door lock linked window operation
●
The power windows can be opened and
closed using the mechanical key.
*
(
●
The power windows can be opened using
the wireless remote control.
*
(
*
: These settings must be customized at
your Lexus dealer.
■
Power windows open warning buzzer
The buzzer sounds and “Window Open” is
shown on the multi-information display in
the instrument cluster when the engine
switch <power switch> is turned off and the
driver’s door is opened with the power win-
dows open.
■
Customization
Settings (e.g. linked door lock operation)
can be changed.
(Customizable features:
This function can be used to prevent
children from accidentally opening or
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
Closing the windows
●
The driver is responsible for all the
power window operations, including
the operation for the passengers. In
order to prevent accidental operation,
especially by a child, do not let a child
operate the power windows. It is possi-
ble for children and other passengers
to have body parts caught in the power
window. Also, when riding with a child,
it is recommended to use the window
lock switch. (
●
Check to make sure that all passen-
gers do not have any part of their body
in a position where it could be caught
when a window is being operated.
●
When using the wireless remote con-
trol or mechanical key and operating
the power windows, operate the
power window after checking to make
sure that there is no possibility of any
passenger having any of their body
parts caught in the window. Also do
not let a child operate window by the
wireless remote control or mechanical
key. It is possible for children and other
passengers to get caught in the power
window.
●
When exiting the vehicle, turn the
engine switch <power switch> off, carry
the key and exit the vehicle along with
the child. There may be accidental
operation, due to mischief, etc., that
may possibly lead to an accident.
■
Jam protection function
●
Never use any part of your body to
intentionally activate the jam protec-
tion function.
●
The jam protection function may not
work if something gets jammed just
before the window is fully closed. Be
careful not to get any part of your body
jammed in the window.
■
Catch protection function
●
Never use any part of your body or
clothing to intentionally activate the
catch protection function.
●
The catch protection function may not
work if something gets caught just
before the window is fully opened. Be
careful not to get any part of your body
or clothing caught in the window.
Preventing accidental operation
(window lock switch)
134
3-5. Opening and closing the windows
closing a passenger window.
Press the switch.
The indicator
will come on and the
passenger window will be locked.
■
The power windows can be operated
when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
■
When the 12-volt battery is discon-
nected
The window lock switch is disabled. If nec-
essary, press the window lock switch after
reconnecting the 12-volt battery.
A
135
4
4
Driving
Driving
4-1. Before driving
Driving the vehicle. . . . . .
Cargo and luggage. . . . ...
Vehicle load limits. . . . . ..
Trailer towing. . . . . . . ...
Dinghy towing . . . . . . . .
4-2. Driving procedures
Engine (ignition) switch (LC500)
. . . . . . . . . . . . . . .
Power (ignition) switch (LC500h)
. . . . . . . . . . . . . . .
EV drive mode (LC500h). .
Automatic transmission (LC500)
. . . . . . . . . . . . . . .
Hybrid transmission (LC500h)
. . . . . . . . . . . . . . ..
Turn signal lever. . . . . . ..
Parking brake . . . . . . . ..
Brake Hold. . . . . . . . . .
4-3. Operating the lights and wipers
Headlight switch. . . . . . .
Automatic High Beam. . . .
Windshield wipers and washer
. . . . . . . . . . . . . . .
4-4. Refueling
Opening the fuel tank cap. ..
4-5. Using the driving support sys-
tems
Lexus Safety System + . . . .
PCS (Pre-Collision System)..
LKA (Lane-Keeping Assist) ..
Dynamic radar cruise control with
full-speed range. . . . . ..
Driving mode select switch ...
Intuitive parking assist. . . ...
BSM (Blind Spot Monitor).
Active rear wing. . . . . .
Driving assist systems. . . ...
4-6. Driving tips
Hybrid vehicle driving tips
(LC500h). . . . . . . . .
Winter driving tips. . . . .
136
4-1. Before driving
4-1.Before driving
■
Starting the engine <hybrid sys-
tem>
■
Driving
1
With the brake pedal depressed,
shift the shift position to D. (
Check that the shift position indicator
shows D.
2
If the parking brake is in manual
mode, release the parking brake.
(
3
Gradually release the brake pedal
and gently depress the accelerator
pedal to accelerate the vehicle.
■
Stopping
1
With the shift position in D, depress
the brake pedal.
2
If necessary, set the parking brake.
If the vehicle is to be stopped for an
extended period of time, shift the shift posi-
tion to P. (
■
Parking the vehicle
1
Stop the vehicle completely.
2
If the parking brake is in manual
mode, set the parking brake.
(
3
Shift the shift position to P.
(
Check that the shift position indicator
shows P.
4
Press the engine switch <power
switch> to stop the engine <hybrid
system>.
5
Slowly release the brake pedal.
6
Lock the door, making sure that you
have the electronic key on your
person.
If parking on a hill, block the wheels as
needed.
■
Starting off on a steep uphill
1
Make sure that the parking brake is
set with the brake pedal depressed,
and then shift the shift position to D.
The hill-start assist control will be activated.
(
2
Release the brake pedal and gently
depress the accelerator pedal.
3
Release the parking brake.
■
For fuel-efficient driving (LC500h)
Keep in mind that hybrid vehicles are similar
to conventional vehicles, and it is necessary
to refrain from activities such as sudden
acceleration. (
■
Driving in the rain
●
Drive carefully when it is raining, because
visibility will be reduced, the windows
may become fogged-up, and the road
will be slippery.
●
Drive carefully when it starts to rain,
because the road surface will be espe-
cially slippery.
●
Refrain from high speeds when driving on
an expressway in the rain, because there
may be a layer of water between the tires
and the road surface, preventing the
steering and brakes from operating prop-
erly.
■
Engine speed while driving
In the following conditions, the engine
speed may become high while driving. This
Driving the vehicle
The following procedures should be
observed to ensure safe driving:
Driving procedure
137
4-1. Before driving
4
Driving
is due to automatic up-shifting control or
down-shifting implementation to meet driv-
ing conditions. It does not indicate sudden
acceleration.
●
The vehicle is judged to be driving uphill
or downhill
●
When the accelerator pedal is released
●
When the brake pedal is firmly or quickly
depressed
■
Restraining the engine <hybrid system>
output (Brake Override System)
●
When the accelerator and brake pedals
are depressed at the same time, the
engine <hybrid system> output may be
restrained.
●
A warning message is displayed on the
multi-information display while the sys-
tem is operating. If a warning message is
shown on the multi-information display,
read the message and follow the instruc-
tions.
■
Restraining sudden start (Drive-Start
Control)
●
When the following unusual operation is
performed, the engine <hybrid system>
output may be restrained.
• When the shift position is shifted from R
to D, D or M to R, N to R, P to D
*
, P to R
*
with the accelerator pedal depressed, a
warning message appears on the multi-
information display. If a warning message
is shown on the multi-information display,
read the message and follow the instruc-
tions.
• When the accelerator pedal is depressed
too much while the vehicle is in reverse.
*
: Depending on the situation, the shift posi-
tion may not be changed.
●
While Drive-Start Control is being acti-
vated, your vehicle may have trouble
escaping from the mud or fresh snow. In
such case, deactivate TRAC (
to cancel Drive-Start Control so that the
vehicle may become able to escape from
the mud or fresh snow.
■
Breaking in your new Lexus
To extend the life of the vehicle, observing
the following precautions is recommended:
●
For the first 186 miles (300 km):
Avoid sudden stops.
●
For the first 621 miles (1000 km):
• Do not drive at extremely high speeds.
• Avoid sudden acceleration.
• Do not drive continuously in low gears.
• Do not drive at a constant speed for
extended periods.
■
Drum-in-disc type parking brake system
Your vehicle has a drum-in-disc type park-
ing brake system. This type of brake system
needs bedding-down of the brake shoes
periodically or whenever the parking brake
shoes and/or drum are replaced. Have your
Lexus dealer perform the bedding down
operation.
■
Operating your vehicle in a foreign
country
Comply with the relevant vehicle registra-
tion laws and confirm the availability of the
correct fuel. (
■
Brake pads and discs
The brake pads and discs are designed for
use under high load conditions. Therefore,
brake noise may be generated depending
on the vehicle speed, braking force and
vehicle environment (temperature, humid-
ity, etc.).
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
When starting the vehicle
LC500: Always keep your foot on the
brake pedal while stopped with the
engine running. This prevents the vehicle
from creeping.
LC500h: Always keep your foot on the
brake pedal while stopped with the
“READY” indicator is illuminated. This
prevents the vehicle from creeping.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст