Lexus GS300/400 (2000 year). Manual — part 110
BR0YW–01
F04504
B
A
A: 20 mm (0.791 in.)
B: 30 mm (1.18 in.)
BR–54
–
BRAKE
HYDRAULIC BRAKE BOOSTER
2162
DISPOSAL
DISPOSAL METHOD OF ACCUMULATOR
(a)
Follow the procedures described below and drain the
high pressure gas from the accumulator.
(b)
Place the accumulator in a vise, cover it with a cloth over
a saw then cut the accumulator body slowly.
CAUTION:
Never cut at a stretch.
(c)
When the outer body of the accumulator is cut, gas dis-
charges.
BR0KC–03
F02900
C
A
B
E
D
F02901
mm (in.)
1.1
(0.0433)
Clearance
”A”
0.1
(0.0039)
Clearance ”B”
0.1
(0.0039)
1.1
(0.0433)
Clearance ”E”
Clearance
”D”
mm (in.)
0.095
(0.0374)
0.3
(0.0118)
0.25
(0.0098)
0.65
(0.0256)
mm (in.)
mm (in.)
–
BRAKE
HYDRAULIC BRAKE BOOSTER
BR–55
2163
REASSEMBLY
Reassembly is in the reverse order of disassembly
(See page
INSTALL ACCUMULATOR BRACKET
When installing the accumulator bracket, adjust to ensure that
clearance (A, B, D and E) shown in the illustration on the left
crresponds to each value in the graphs below and are within the
C range, using a thickness gauge.
C Range: 0.1 – 0.4 mm (0.004 – 0.016 in.)
BR0KD–05
BR–56
–
BRAKE
HYDRAULIC BRAKE BOOSTER
2164
INSTALLATION
Installation is in the reverse order of removal (See page
HINT:
After installation, fill the brake reservoir with brake fluid and bleed brake system (See page
Check for leaks.
BR0K1–07
F02813
Front Speed Sensor
5.0 (51, 44 in.·lbf)
5.0 (51, 44 in.·lbf)
8.0 (82, 71 in.·lbf)
N·m (kgf·cm, ft·lbf)
: Specified torque
–
BRAKE
FRONT SPEED SENSOR
BR–57
2165
FRONT SPEED SENSOR
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст