Lexus GS300/400 (2000 year). Manual — part 76
BE–4
–
BODY ELECTRICAL
TROUBLESHOOTING
2305
”HI–Beam” does not light (One side).
1. Bulb
2. H–LP L–UPR Fuse
3. H–LP R–UPR Fuse
4. Wire Harness
–
–
”Flash” does not light.
1. H–LP L–UPR Fuse
2. H–LP R–UPR Fuse
3. Headlight Dimmer Switch
4. *Light Control ECU
5. Wire Harness
–
–
”Flash” does not light.
1. Bulb
2. *Light Control ECU
3. Wire Harness
–
–
–
Headlight does not come on.
1. Headlight Control Relay
2. Light Control Switch
3. *Light Control ECU
4. Wire Harness
–
–
Headlight does not come on.
1. Bulb
2. *Light Control ECU
3. Wire Harness
–
–
–
Headlight flickers.
1. Bulb
2. *Light Control ECU
3. Wire Harness
–
–
–
Headlight is dark.
1. Bulb
2. *Light control ECU
3. Wire Harness
–
–
–
Only one taillight comes on.
1. Bulb
2. Wire Harness
–
–
Taillight does not come on.
(Headlight is normal)
1. TAIL Fuse
2. GAUGE Fuse
3. Taillight Control Relay
4. Light Failure Relay
5. Light Control Switch
6. Wire Harness
–
Taillight does not come on.
(Headlight does not light)
1. Light Control Switch
2. Wire Harness
–
Rear combination light does not come on.
1. Light Failure Relay
2. Wire Harness
3. Bulb
–
–
*: HID Type
CANADA:
Symptom
Suspect Area
See page
Only one headlight comes on.
1. Daytime Running Light No.2, 3, 4 Relay
2. Daytime Running Light Main Relay
3. Bulb
4. *Light Control ECU
5. Wire Harness
–
–
–
”LO–Beam” does not light (All).
1. Headlight Control Relay
2. *Light Control ECU
3. Wire Harness
–
–
”LO–Beam” does not light (One side).
1. Bulb
2. H–LP L–LWR Fuse
3. H–LP R–LWR Fuse
4. *Light Control ECU
5. Wire Harness
–
–
–
–
BODY ELECTRICAL
TROUBLESHOOTING
BE–5
2306
”HI–Beam” does not light (All).
1. Headlight Dimmer Switch
2. Daytime Running Light Main Relay
3. Wire Harness
–
”HI–Beam” does not light (One side).
1. Bulb
2. H–LP L–UPR Fuse
3. H–LP R–UPR Fuse
4. Daytime Running Light No.3 Relay
5. Wire Harness
–
–
”Flash” does not light.
1. Headlight Dimmer Switch
2. Daytime Running Light Main Relay
3. Wire Harness
–
Headlight does not come on.
1. Headlight Control Relay
2. Daytime Running Light Main Relay
3. Daytime Running Light No.2, 3, 4 Relay
4. Headlight Dimmer Switch
5. Light Control Switch
6. Wire Harness
7. *Light Control ECU
8. Bulb
–
–
–
Headlight does not come on with light control switch in HEAD.
1. Light Control Switch
2. *Light Control ECU
3. Wire Harness
–
–
Headlight does not go out with light control switch in OFF.
1. Headlight Control Relay
2. *Light Control ECU
3. Wire Harness
–
–
Headlight flickers.
1. Bulb
2. *Light Control ECU
3. Wire Harness
–
–
Headlight is dark.
1. Bulb
2. *Light control ECU
3. Wire Harness
–
–
–
Taillight does not come on with light control switch in TAIL.
1. Taillight Control Relay (Instrument Panel J/B)
2. Light Control Switch
3. Wire Harness
–
–
Taillight does not go out with light control switch in OFF.
1. Taillight Control Relay
2. Light Control Switch
3. Wire Harness
–
Headlight does not come on with engine running and light control
switch in OFF.
1. ECU–B Fuse
2. GAUGE Fuse
3. Daytime Running Light Main Relay
4. Daytime Running Light No.2, 3, 4 Relay
5. Generator L Terminal
6. Parking Brake Switch
7. Wire Harness
–
*: HID Type
BE–6
–
BODY ELECTRICAL
TROUBLESHOOTING
2307
HEADLIGHT BEAM LEVEL CONTROL SYSTEM
Symptom
Suspect Area
See page
Beam axis is not controlled. (It is not initialized.)
Headlight Beam Level Control System does not operate.
1. ECU–IG Fuse
2. Headight Beam Level Control Actuator
3. Headlight Beam Level Control ECU
4. Wire Harness Side
–
Beam axis is not controlled. (It is initialized.)
Headlight Beam Level Control System does not operate.
1. Height Control Sensor
2. Headlight Beam Level Control ECU
3. Wire Harness Side
–
Controlled angle of head light is unusual.
(The angle is controlled.)
1. Height Control Sensor
2. Headlight Beam Level Control ECU
3. Headlights
4. Wire Harness Side
–
–
Beam axis position is not stable during driving.
1. ABS System
2. Headlights
3. Wire Harness
–
FOG LIGHT SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
Symptom
Suspect Area
See page
Fog light does not light up with light control SW HEAD
(Headlight is normal.)
1. FOG Fuse
2. Fog Light Relay
3. Fog Light Switch
4. Wire Harness
5. Body No.2 ECU
–
–
Fog light does not light up with light control SW HEAD
(Headlight does not light).
1.
*1
Other Parts
2. Wire Harness
–
–
Only one light does not light up.
1. Bulb
2. Wire Harness
–
–
*1: Inspect Headlight System
TURN SIGNAL AND HAZARD WARNING SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
Symptom
Suspect Area
See page
”Hazard” and ”Turn” do not light up.
1. GAUGE Fuse
2. TURN HAZ Fuse
3. Ignitioin Switch
4. Turn Signal Flasher Relay
5. Wire Harness
–
Hazard warning light does not light up.
(Turn is normal)
1. Hazard Warning Switch
2. Wire Harness
–
Turn signal does not light up.
(Hazard is normal)
1. Turn Signal Switch
2. Wire Harness
–
Turn signal does not light up in one direction.
1. Turn Signal Switch
2. Wire Harness
–
Only one bulb does not light up.
1. Bulb
2. Wire Harness
–
–
–
BODY ELECTRICAL
TROUBLESHOOTING
BE–7
2308
INTERIOR LIGHT SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
Symptom
Suspect Area
See page
All the lights do not come ON.
1. DOME Fuse
2. Body ECU NO.2
–
The light does not come ON when the driver’s door is opened.
1. Driver’s Door Courtesy Switch
2. Wire Harness
–
The light does not come ON when the passenger’s door is
opened.
1. Passenger’s Door Courtesy Switch
2. Wire Harness
–
The light does not come on when the rear–right door is opened.
1. Rear–Right Door Courtesy Switch
2. Wire Harness
–
The light does not come on when the rear–left door is opened.
1. Rear–Left Door Courtesy Switch
2. Wire Harness
–
Only one of the bulbs comes ON.
Bulb
–
The illumination does not fade out when all the doors are closed.
1. Courtesy Switch
2. Wire Harness
–
The illumination does not fade out immediately when the ignition
switch is turned to ACC or ON within 15 seconds after all the
doors are closed.
1. Ignition Switch
2. RADIO NO.2 Fuse
3. GAUGE Fuse
4. Wire Harness
–
The illumination does not fade out immediately when all the doors
are locked within 15 seconds after they are closed.
1. Door Unlock Detection Switch
2. Wire Harness
–
Interior light does not light up.
(in front personal light)
1. Bulb
2. Front Personal Light
3. Wire Harness
–
–
Front personal light does not light up.
1. Bulb
2. Front Personal Light
3. Wire Harness
–
–
Rear personal light does not light up.
1. Bulb
2. Rear Personal Light
3. Wire Harness
–
–
Vanity light does not light up.
1. Bulb
2. Vanity Light
3. Wire Harness
–
–
Luggage compartment light does not light up.
1. Bulb
2. Luggage Compartment Door Courtesy Switch
3. Wire Harness
–
–
Courtesy light does not light up.
1. Bulb
2. Door Courtesy Switch
3. Wire Harness
–
–
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст