Lexus GS300/400 (2000 year). Manual — part 88
I04053
Wire Harness Side
I04060
e–2–2–J
I04053
Wire Harness Side
BE–66
–
BODY ELECTRICAL
INTERIOR LIGHT SYSTEM
2367
20.
INSPECT GLOVE COMPARTMENT LIGHT CIRCUIT
Disconnect the connector from the light and inspect the con-
nector on the wire harness side, as shown.
Tester connection
Condition
Specified condition
2 – Ground
Glove compartment door courtesy switch ON
Continuity
1 – Ground
LIght control switch in TAIL or HEAD
Battery positive voltage
If circuit is not as specified, inspect power source or wire har-
ness.
21.
INSPECT LICENCE PLATE LIGHT CONTINUITY
Using an ohmmeter, check that continuity exists between termi-
nals.
If continuity is not as specified, replace the light assembly or
bulb.
22.
INSPECT LICENCE PLATE LIGHT CIRCUIT
Disconnect the connector from the light and inspect the con-
nector on the wire harness side, as shown.
Tester connection
Condition
Specified condition
1 – Ground
Constant
Continuity
2 – Ground
Light control switch TAIL or HEAD
Battery positive voltage
If circuit is not as specified, inspect power source or wire har-
ness.
BE0GW–08
I01355
Ignition Switch
Driver Side Junction Block
GAUGE Fuse
Back–up Lights
Park/Neutral Position Switch
–
BODY ELECTRICAL
BACK–UP LIGHT SYSTEM
BE–67
2368
BACK–UP LIGHT SYSTEM
LOCATION
BE0GX–05
BE–68
–
BODY ELECTRICAL
BACK–UP LIGHT SYSTEM
2369
INSPECTION
INSPECT PARK/ NEUTRAL POSITION SWITCH CONTINU-
ITY
(See page
BE0H6–08
I01356
Stop Light Switch
Driver Side Junction Block
STOP Fuse
Light Failure Sensor
Stop Lights
–
BODY ELECTRICAL
STOP LIGHT SYSTEM
BE–69
2370
STOP LIGHT SYSTEM
LOCATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст