Lexus GS300/400 (2000 year). Manual — part 27
D01066
D01067
D01904
1
2
3
D01069
D01070
Tip of Screwdriver
AT–18
–
AUTOMATIC TRANSMISSION
FLOOR SHIFT ASSEMBLY
1966
7.
REMOVE SHIFT LEVER GUIDE HOUSING AND INDI-
CATOR LAMP SUB–ASSEMBLY
(a)
Disconnect the indicator lamp wire and connector from
the shift lever plate.
(b)
Remove the shift lever guide housing with the indicator
lamp sub–assembly from the shift lever plate.
(c)
Remove the indicator lamp sub–assembly from the shift
lever guide housing.
8.
DISASSEMBLE INDICATOR LAMP SUB–ASSEMBLY
(a)
Remove the bulb from the indicator lamp wire sub–as-
sembly.
(b)
Using a small screwdriver, remove the terminals of the in-
dicator lamp wire sub–assembly from the connector, as
shown in the illustration.
9.
REMOVE SHIFT LEVER DETENT PIN, SHIFT LEVER
SPRING DAMPER AND COMPRESSION SPRING
FROM SHIFT LEVER SUB–ASSEMBLY
10.
REMOVE SPRING HOLDER AND SHIFT LEVER TOR-
SION SPRING
(a)
Using a screwdriver, remove the spring holder.
D01072
D01073
D01074
Remove
Raise
D01076
D01077
–
AUTOMATIC TRANSMISSION
FLOOR SHIFT ASSEMBLY
AT–19
1967
(b)
Remove the shift lever torsion spring.
11.
REMOVE 2 SHIFT LOCK CONTROL UNIT ASSEMBLY
SET SCREWS
12.
REMOVE NO.1 SHIFT LOCK SWITCH PLATE
(a)
Disconnect the groove of the No.1 shift lock switch plate
from the projection of the shift lock control unit.
(b)
Raise the plate up to the direction shown in the illustra-
tion.
(c)
Remove the plate.
(d)
Remove the roller and shift lever anti–rattle cushion from
the plate.
(e)
Separate the shift lever anti–rattle cushion from the roller.
13.
REMOVE SHIFT LOCK PLATE STOPPER
(a)
Using pliers, remove the stopper.
(b)
Remove the shift lever anti–rattle cushion and shift lock
plate stopper cap from the stopper.
D01078
D01080
D01082
D01083
D01084
AT–20
–
AUTOMATIC TRANSMISSION
FLOOR SHIFT ASSEMBLY
1968
14.
REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY
(a)
Remove the shift lock control unit assembly from the shift
lever plate.
(b)
Push the shift lock solenoid link lightly, turn and remove
it.
(c)
Remove the compression spring.
(d)
Remove the slotted spring pin and separate the shift lock
solenoid link.
15.
REMOVE SHIFT LEVER SUB–ASSEMBLY
(a)
Using a pin punch and hammer, drive out the pin.
(b)
Remove the shift lever sub–assembly.
(c)
Remove the shift lever nut from the shift lever sub–as-
sembly.
16.
REMOVE CONTROL LEVER, SPACER AND CON-
TROL SHAFT
(a)
Remove the nut.
(b)
Remove the 2 spacers and control shaft from the shift le-
ver plate.
(c)
Disconnect the shift lever boot from shift lever plate.
(d)
Remove the control lever.
D01085
–
AUTOMATIC TRANSMISSION
FLOOR SHIFT ASSEMBLY
AT–21
1969
17.
REMOVE CLIP, CONNECTING ROD SWIVEL, LOWER
CONTROL SHAFT BUSHING, LOWER CONTROL
SHAFT PIECE, PLATE WASHER AND SHIFT LEVER
BOOT FROM CONTROL LEVER
(a)
Using pliers, remove the clip.
(b)
Remove the connecting rod swivel, lower control shaft
bushing, lower control shaft piece, 2 plate washers and
shift lever boot from the control lever.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст