Lexus RX300 (MCU15). Manual — part 525
H01586
Slider
Disconnection is completed
Slider
RS–10
–
SUPPLEMENTAL RESTRAINT SYSTEM
SRS AIRBAG
LEXUS RX300 (RM785E)
(a)
Align a lock part of male connector and a slider of female
connector in the same direction as shown in the illustra-
tion, fit in them without rubbing.
(b)
Be sure to insert until they are locked. After fitting in pull
them slightly to check that they are locked. (When locked,
make sure that the outer returns to its original position and
sound at the time of fitting in can be heard.)
HINT:
S
As the slider slides, do not touch it.
S
Be careful not to deform the release board. If the release
board is deformed, replace it with a new one.
15.
DISCONNECTION OF CONNECTORS FOR STEERING
WHEEL PAD (with AIRBAG) AND FRONT PAS-
SENGER AIRBAG ASSEMBLY
(a)
Place a finger on the slider.
(b)
Slide the slider to release lock.
(c)
Disconnect the connector.
H01587
Slider
Slider
–
SUPPLEMENTAL RESTRAINT SYSTEM
SRS AIRBAG
RS–11
LEXUS RX300 (RM785E)
16.
CONNECTION OF CONNECTORS FOR STEERING
WHEEL PAD (with AIRBAG) AND FRONT PAS-
SENGER AIRBAG ASSEMBLY
(a)
Align a lock part of male connector and a slider of female
connector in the same direction as shown in the illustra-
tion, fit in them without rubbing.
(b)
Be sure to insert until they are locked. After fitting in pull
them slightly to check that they are locked. (When locked,
make sure that the outer returns to its original position and
sound at the time of fitting in can be heard.)
HINT:
S
As the slider slides, do not touch it.
S
Be careful not to deform the release board. If the release
board is deformed, replace it with a new one.
RS0JQ–08
H05064
Steering Column Upper Cover
Spiral Cable
Steering Wheel
Steering Wheel Pad
Steering Column Lower Cover
N·m (kgf·cm, ft·lbf)
: Specified torque
36 (360, 26)
7.1 (72, 63 in.·lbf)
Torx screw
Torx screw
Steering Wheel
Lower No. 2 Cover
Steering Wheel
Lower No. 3 Cover
7.1 (72, 63 in.·lbf)
RS–12
–
SUPPLEMENTAL RESTRAINT SYSTEM
STEERING WHEEL PAD AND SPIRAL CABLE
LEXUS RX300 (RM785E)
STEERING WHEEL PAD AND SPIRAL CABLE
COMPONENTS
RS0JR–01
–
SUPPLEMENTAL RESTRAINT SYSTEM
STEERING WHEEL PAD AND SPIRAL CABLE
RS–13
LEXUS RX300 (RM785E)
REMOVAL
HINT:
For step 1 to 4, refer to page SR–12.
1.
REMOVE STEERING WHEEL PAD
2.
REMOVE STEERING WHEEL
3.
REMOVE UPPER AND LOWER COLUMN COVERS
4.
REMOVE SPIRAL CABLE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст