Lexus RX300 (MCU15). Manual — part 550
SA10I–05
F14061
F03992
Bushing Stopper
SA–40
–
SUSPENSION AND AXLE
FRONT STABILIZER BAR
LEXUS RX300 (RM785E)
REMOVAL
1.
REMOVE LEFT AND RIGHT FRONT WHEELS
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2.
REMOVE LEFT AND RIGHT STABILIZER BAR LINKS
(a)
Remove the 2 nuts and stabilizer bar link.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
HINT:
If the ball joint turns together with the nut, use a 5 mm hexagon
wrench to hold the stud.
(b)
Employ the same manner described above to the other
side.
3.
REMOVE LEFT AND RIGHT STABILIZER BAR
BRACKETS AND BUSHINGS
(a)
Remove the 2 bolts, bracket and bushing.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, install the bushing to the outside of
the bushing stopper on the stabilizer bar.
(b)
Employ the same manner described above to the other
side.
4.
REMOVE STABILIZER BAR
HINT:
At the time of installation, set the stabilizer bar with colored side
at LH side.
5.
REMOVE STOPPER CLAMP AND BUSHING STOP-
PER IF NECESSARY
(a)
Using a screwdriver, remove the stopper clamp.
(b)
Remove the bushing stopper.
SA04P–03
Z00340
–
SUSPENSION AND AXLE
FRONT STABILIZER BAR
SA–41
LEXUS RX300 (RM785E)
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA-
TION CONDITION
(a)
As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b)
Using a torque wrench, turn the nut continuously 1 turn
per 2 – 4 seconds and take the torque reading on the 5th
turn.
Turning torque:
0.05 – 1.0 N·m (0.5 – 10 kgf·cm, 0.4 – 8.7 in.·lbf)
SA04Q–03
SA–42
–
SUSPENSION AND AXLE
FRONT STABILIZER BAR
LEXUS RX300 (RM785E)
INSTALLATION
Installation is in the reverse order of removal (See page SA–40).
SA03E–03
F03995
N·m (kgf·cm, ft·lbf)
z
Non–reusable part
: Specified torque
No. 1 Lower
Suspension Arm
No. 2 Lower
Suspension Arm
255 (2,600, 188)
ABS Speed Sensor
Brake Caliper
8.0 (82, 71 in.·lbf)
Parking Brake Cable
Pin
Rear Axle Hub
with Carrier
Strut Rod
Disc
Lock Cap
Parking Brake Assembly
216 (2,200, 159)
20 (200, 14)
123 (1,250, 91)
177 (1,800, 131)
177 (1,800, 131)
z
Cotter Pin
Rear Drive Shaft
47 (475, 34)
–
SUSPENSION AND AXLE
REAR AXLE HUB
SA–43
LEXUS RX300 (RM785E)
REAR AXLE HUB
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст