Lexus RX300 (MCU15). Manual — part 563
SA04A–04
F12954
N·m (kgf·cm, ft·lbf)
: Specified torque
Stabilizer
Bar Link
Bushing
No. 2 Bracket
Bushing
Stabilizer
Bar Link
Stabilizer Bar
19 (195, 14)
39 (400, 29)
39 (400, 29)
39 (400, 29)
19 (195, 14)
No. 1 Bracket
No. 1 Bracket
No. 2 Bracket
SA–92
–
SUSPENSION AND AXLE
REAR STABILIZER BAR
LEXUS RX300 (RM785E)
REAR STABILIZER BAR
COMPONENTS
SA19A–02
F12955
F12956
Bushing Stopper
–
SUSPENSION AND AXLE
REAR STABILIZER BAR
SA–93
LEXUS RX300 (RM785E)
REMOVAL
1.
REMOVE REAR WHEELS
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2.
REMOVE LEFT AND RIGHT STABILIZER BAR LINKS
(a)
Remove the 2 nuts and stabilizer bar link.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
HINT:
If the ball joint turns together with the nut, use a 5 mm hexagon
wrench to hold the stud.
(b)
Employ the same manner described above to the other
side.
3.
REMOVE LEFT AND RIGHT STABILIZER BAR NO. 2
BRACKETS AND BUSHINGS
Remove the 2 bolts, No. 2 bracket and bushing.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, install the bushing to the inside of the
bushing stopper on the stabilizer bar.
4.
REMOVE STABILIZER BAR
SA04C–03
F01413
SA–94
–
SUSPENSION AND AXLE
REAR STABILIZER BAR
LEXUS RX300 (RM785E)
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA-
TION CONDITION
(a)
As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b)
Using a torque wrench, turn the nut continuously 1 turn
per 2 – 4 seconds and take the torque reading on the 5th
turn.
Turning torque:
0.05 – 1.0 N·m (0.5 – 10 kgf·cm, 0.4 – 8.7 in.·lbf)
SA04D–02
–
SUSPENSION AND AXLE
REAR STABILIZER BAR
SA–95
LEXUS RX300 (RM785E)
INSTALLATION
Installation is in the reverse order of removal (See page SA–93).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст