Lexus RX300 (MCU15). Manual — part 160
BE0UU–01
–
BODY ELECTRICAL
ANTENNA
BE–187
LEXUS RX300 (RM785E)
INSTALLATION
Installation is in the reverse order of removal. (See page BE–184)
I10786
Wire Harness Side:
BE1AS–02
BE–188
–
BODY ELECTRICAL
MULTI DISPLAY
LEXUS RX300 (RM785E)
MULTI DISPLAY
INSPECTION
INSPECT MULTI DISPLAY ASSEMBLY CIRCUIT
Disconnect the connector from the multi display assembly and
inspect the connector on the wire harness side, as shown in the
table.
Tester connection
Condition
Specified condition
8 – Ground
Constant
Continuity
1 – Ground
Constant
Battery voltage
3 – Ground
Ignition switch LOCK
No voltage
3 – Ground
Ignition switch ACC or ON
Battery voltage
If the circuit is as specified, replace the multi display assembly.
If the circuit is not as specified, inspect the circuits connected
to other parts.
BE02Q–18
I07371
Engine & ECT ECU
Transponder Key Coil
Transponder Key Amplifier
–
BODY ELECTRICAL
ENGINE IMMOBILISER SYSTEM
BE–189
LEXUS RX300 (RM785E)
ENGINE IMMOBILISER SYSTEM
LOCATION
BE0G8–11
I04266
1
2
BE–190
–
BODY ELECTRICAL
ENGINE IMMOBILISER SYSTEM
LEXUS RX300 (RM785E)
INSPECTION
INSPECTION TRANSPONDER KEY COIL CONTINUITY
Check that continuity exists between terminals 1 and 2.
If continuity is not as specified, replace the coil.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст