LEXUS LC 500 (2019 year). Instruction — part 6
88
2-1. Instrument cluster
■
Rear wing position (if equipped)
Displays the raised/retracted state of
the active rear wing
■
LKA (Lane-Keeping Assist) vehicle
sway warning
■
Display off
A blank screen is displayed
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Select to display the dynamic radar
cruise control with full-speed
range/LKA (Lane-Keeping Assist)
information, when the system is used.
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
Select to change the meter display set-
tings.
■
Language
Select to change the language on the
display.
■
Units
Select to change the unit of measure
for fuel consumption.
■
Eco Driving Indicator Light
(LC500)
Select to activate/deactivate the Eco
Driving Indicator Light.
■
EV indicator (LC500h)
Select to activate/deactivate the EV
indicator.
■
Drive information 1/Drive infor-
mation 2
Select to select up to 2 items that will
be displayed on the “Drive Info 1”
screen and “Drive Info 2” screen
respectively. (
■
Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system
• Making call display of the hands-
free phone system
Navigation system-linked dis-
play
Audio system-linked display
Driving assist system information
Warning message display
Settings display
89
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
• Audio system operation display
• Voice recognition display
• Instrument panel brightness adjust-
ment display
■
Ring position memory
Select to change the meter ring posi-
tion when the engine <hybrid system> is
started.
The position before the engine <hybrid
system> is stopped or the center posi-
tion can be selected.
■
Accent color
Select to change the accent color on
the screen, such as the cursor color.
■
Rev indicator
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indicator
will be displayed.
■
Rev peak
Select to set the rev peak on/off.
■
Clock
Select to switch between 12-hour dis-
play and 24-hour display.
■
Initialization
Select to reset the meter display set-
tings.
■
Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
●
When a warning message appears on the
multi-information display
●
When the vehicle begins to move
■
Customization
The settings can be changed on
of the
multi-information display.
●
Settings of the driving assist systems
(
●
Vehicle settings (
Displays suggestions to the driver in
the following situations. For some sug-
gestions, a response to a displayed
suggestion can be selected. To select a
response, use the meter control
switches.
■
Suggestion to turn on the head-
lights
If the headlight switch is in other than
or
position, and the vehicle
speed is 3 mph (5 km/h) or higher for
a certain amount of time when the sur-
WARNING
■
Cautions during setting up the dis-
play
As the engine <hybrid system> needs to
be running <operating> during setting up
the display, ensure that the vehicle is
parked in a place with adequate ventila-
tion. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
■
While setting up the display
To prevent 12-volt battery discharge,
ensure that the engine is running <hybrid
system is operating> while setting up the
display features.
Suggestion function
90
2-1. Instrument cluster
roundings are dark, a suggestion mes-
sage will be displayed.
■
Suggestion to turn off the head-
lights
If the headlights are left on for a certain
amount of time after the engine switch
<power switch> has been turned off, a
suggestion message will be displayed
asking if you wish to turn the headlights
off.
When the headlight switch is in the
“AUTO” position: To turn the headlights
off, select “Yes”.
If a front door is opened after the engine
switch <power switch> is turned off, this
suggestion message will not be displayed.
■
Suggestion to unlock the power
windows
If it is attempt to close the passenger’s
side window using the power window
switch on the driver’s door, a sugges-
tion message will be displayed.
■
Customization
The suggestion function can be turned
on/off. (Customizable features:
*
: If equipped
Navigation system-linked display
area
Displays the following items, which are
linked to the navigation system:
• Speed limit
• Street name
• Route guidance to destination
• Compass
Driving assist system status display
area
Displays the current shift position, and shift
Head-up display
*
The head-up display is linked to the
meters and navigation system and
projects a variety of information in
front of the driver, such as the cur-
rent vehicle speed and route guid-
ance to a set destination.
System components
A
B
91
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
range/gear position, or the operational sta-
tus of the following systems:
• Pre-collision warning (Pre-Collision Sys-
tem) (
• Dynamic radar cruise control with full-
speed range (
• LKA (Lane-Keeping Assist) (
• Intuitive parking assist (
Displayed content is the same as that dis-
played on the multi-information display. For
details, refer to the explanations of each
system.
Vehicle speed display
Information display area (
Displays the following items:
• Warning/message
•
/
icon (
• Audio system operation status
• Dynamic radar cruise control with full-
speed range status (
• Hands-free system status (
P.93)
• Eco Driving Indicator/tachometer
(
P.94) (LC500)
• Hybrid System Indicator/motor power
display/tachometer (
P.94) (LC500h)
HUD (Head-up display) switch
■
Enabling/Disabling the head-up
display
Pressing the switch turns the head-up
display on/off.
■
Changing settings of the head-up
display
Select
on the multi-information dis-
play (
P.84) to change the following
settings:
Display brightness/position
Select to adjust the brightness and position
of the head-up display.
Eco Driving Indicator/tachometer
(LC500)
Select to display Eco Driving Indicator,
tachometer or no content.
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
Select to display Hybrid System Indicator,
tachometer or no content.
Motor power display can be displayed
when Hybrid System Indicator is selected
while the driving mode (
) is other
than the Eco drive mode.
Display content
Select to enable/disable the following
items:
• Route guidance to destination
• Driving assist system status
• Compass
• Audio system operation status
Display angle
Using the head-up display
C
D
E
92
2-1. Instrument cluster
Select to adjust the angle of the head-up
display.
■
Head-up display
●
The head-up display may seem dark and
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up dis-
play or remove your sunglasses.
●
When the head-up display is turned off, it
will remain off even if the engine switch
<power switch> is turned to ACCES-
SORY mode or IGNITION ON mode
<ON mode> after the engine switch
<power switch> has been turned off.
●
The startup image will be displayed on
the head-up display after the engine
switch <power switch> has been turned to
IGNITION ON mode <ON mode> while
the head-up display switch is set to on.
■
Display brightness
The brightness of the head-up display can
be adjusted on
of the multi-information
display. Also, it is automatically adjusted
according to the ambient brightness.
■
Head-up display automatic position
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(
■
When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
■
Customization
Settings (e.g. display) can be changed.
(Customizable features:
WARNING
■
Before using the head-up display
●
Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
●
Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
■
Caution for changing settings of the
head-up display
As the engine needs to be running
<hybrid system needs to be operating>
while changing the settings of the head-
up display, ensure that the vehicle is
parked in a place with adequate ventila-
tion. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
■
To prevent damage to components
●
Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
●
Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
93
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Displays the following items in the
appropriate situation:
■
Warning/message
Displays the following warning/mes-
sages:
• Master warning message
• Notification message (Dynamic
radar cruise control with full-speed
range)
• Other messages
■
/
icons
Displays the following multi-informa-
tion display linked icons:
: Master warning icon
Displayed when a warning message is dis-
played on the multi-information display.
(
: Information icon
Displayed when a suggestion/advice pop-
up display is displayed on the multi-infor-
mation display. (
■
Hands-free system status
Displayed when the hands-free system
is operated.
■
Audio system operation status
Displayed when the audio system is
operated.
■
Eco Driving Indicator/tachometer
(LC500)
Displays either of Eco Driving Indica-
tor or the tachometer.
■
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
Displays either of Hybrid System Indi-
cator or the tachometer.
Motor power display can be displayed
when Hybrid System Indicator is
selected while the driving mode
(
P.213) is other than the Eco drive
mode.
Displays the following items which are
linked to the navigation system:
■
Speed limit
Displays the speed limit on the current
road.
■
Street name
When the navigation system is per-
forming route guidance, the name of
the next street will be displayed on the
top of the display area.
■
Route guidance to destination
Displayed when the navigation system
is performing route guidance. When
approaching an intersection, an arrow
will be displayed to indicate the sug-
NOTICE
●
Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
■
When changing the settings of the
head-up display
To prevent battery discharge, ensure that
the engine is running while changing the
settings of the head-up display.
Information display area
Navigation system-linked dis-
play area
94
2-1. Instrument cluster
gested direction of travel.
■
Compass
Displays the direction of travel.
■
Street name display
Only street names which are included in the
map data will be displayed.
■
Eco Driving Indicator
Eco Driving Indicator Zone Display
Eco driving ratio based on acceler-
ation
Zone of Eco driving
Displayed content is the same as that dis-
played on the multi-information display
(Eco Driving Indicator). For details, refer to
P.78.
■
Tachometer
Displays the engine speed in revolu-
tions per minute.
■
Hybrid System Indicator
Charge area
Hybrid Eco area
Eco area
Power area
Displayed content is the same as that dis-
played on the meter (Hybrid System Indi-
cator). For details, refer to P.78.
■
Motor power display
Charge area
Power area
Displayed content is the same as that dis-
played on the meter (Motor power dis-
play). For details, refer to P.79.
Motor power display can be displayed
when Hybrid System Indicator is selected
Eco Driving Indicator/tachome-
ter (LC500)
A
B
C
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
A
B
C
D
A
B
95
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
while the driving mode (
than the Eco drive mode.
■
Tachometer
Displays the engine speed in revolu-
tions per minute.
*
: If equipped
Multi-information display
Center Display
Meter control switches
“MENU” button
Touchpad
Energy monitor
*
/consump-
tion screen
You can view the status of your
hybrid system (LC500h) and fuel
consumption information on the
multi-information display and Cen-
ter Display.
The energy monitor or consump-
tion screen can be displayed on the
side display.
System components
A
B
C
D
E
96
2-1. Instrument cluster
Center Display
Press the “MENU” button on the Remote Touch, and then select
on the menu
screen.
If the “Trip Information” or “History” screen is displayed, select “Energy”.
Multi-information display
Press
or
of the meter control switches and select
, and then press
or
to select the energy monitor display.
Energy monitor (LC500h)
When the vehicle is powered by the electric motor (traction motor)
Center Display
Multi-information display
When the vehicle is powered by both the gasoline engine and the electric motor (traction
motor)
Center Display
Multi-information display
97
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
These images are examples only, and may vary slightly from actual conditions.
When the vehicle is powered by the gasoline engine
Center Display
Multi-information display
When the vehicle is charging the hybrid battery (traction battery)
Center Display
Multi-information display
When there is no energy flow
Center Display
Multi-information display
98
2-1. Instrument cluster
■
Hybrid battery (traction battery)
status
Center Display
Low
High
Multi-information display
Low
High
These images are examples only, and may
vary slightly from actual conditions.
Press the “MENU” button on the
Remote Touch, then select
on the
screen, and then select “Trip Informa-
tion” or “History”.
■
Trip information
If a screen other than “Trip Information”
is displayed, select “Trip Information”.
Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Regenerated energy in the past 15
minutes (LC500h)
One symbol indicates 50 Wh. Up to 5
symbols are shown.
Average vehicle speed since the
engine <hybrid system> was started.
Elapsed time since the engine
<hybrid system> was started.
Cruising range
Average fuel consumption for the past 15
minutes is divided by color into past aver-
ages and averages attained since the
engine switch <power switch> was last
turned to IGNITION ON mode <ON
mode>. Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
■
History
If a screen other than “History” is dis-
played, select “History”.
Consumption
A
B
A
B
A
B
C
D
E
F
G
99
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption record
Resetting the history data
Updating the latest fuel consump-
tion data
The average fuel consumption history is
divided by color into past averages and the
average fuel consumption since the last
updated. Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
■
Updating the history data
Update the latest fuel consumption by
selecting “Clip” to measure the current fuel
consumption again.
■
Resetting the data
The fuel consumption data can be deleted
by selecting “Clear”.
■
Cruising range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption.
As a result, the actual distance that can be
driven may differ from that displayed.
Display the vehicle information on the
side display (
or
to display the desired
screen.
■
Trip information (type A)
Displays the average fuel consumption
and regenerated energy for the past 10
minutes in 1 minute intervals
(LC500h), as well as the cruising
range.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
■
Trip information (type B)
Displays the cruising range, latest fuel
consumption and the amount of time
elapsed since the engine <hybrid sys-
tem> was started.
A
B
C
D
E
Using the side display
100
2-1. Instrument cluster
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
■
History
Displays the average fuel consumption,
last average fuel consumption and
highest fuel consumption.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
■
Energy monitor (LC500h)
Displays the hybrid system operation
and energy recovery states.
Displayed content is the same as that dis-
played on the multi-information display.
(
The image is an example only, and may
vary slightly from actual conditions.
101
3
3
Be
fore
dri
ving
Before driving
3-1. Key information
Keys . . . . . . . . . . . . .
3-2. Opening, closing and locking the
doors and trunk
Doors. . . . . . . . . . . ...
Trunk. . . . . . . . . . . . .
Smart access system with push-
button start. . . . . . . . ..
3-3. Adjusting the seats
Front seats. . . . . . . . . .
Driving position memory . .
Head restraints. . . . . . .
3-4. Adjusting the steering wheel and
mirrors
Steering wheel. . . . . . . .
Inside rear view mirror. . . .
Outside rear view mirrors. ..
3-5. Opening and closing the win-
dows
Power windows. . . . . . ...
102
3-1. Key information
3-1.Key information
The following keys are provided with
the vehicle.
Electronic keys
• Operating the smart access system with
push-button start (
• Operating the wireless remote control
function
Mechanical keys
Key number plate
Card key (electronic key) (if
equipped)
Operating the smart entry & start system
(
■
Card key (if equipped)
●
The card key is not waterproof.
●
The mechanical key that is stored inside
the card key should be used only if a
problem arises, such as when the card
key does not operate properly.
●
If it is difficult to take out the mechanical
key, push down the release button using a
pen tip etc. If it is still difficult to pull it out,
use a coin etc. (
●
To store the mechanical key in the card
key, insert it while pressing the release
button.
●
If the battery cover is not installed and the
battery falls out or if the battery was
removed because the key got wet, rein-
stall the battery with the positive terminal
facing the Lexus emblem.
■
When riding in an aircraft
When bringing an electronic key onto an
aircraft, make sure you do not press any
buttons on the electronic key while inside
the aircraft cabin. If you are carrying an
electronic key in your bag etc., ensure that
the buttons are not likely to be pressed acci-
dentally. Pressing a button may cause the
electronic key to emit radio waves that
could interfere with the operation of the air-
craft.
■
Electronic key battery depletion
●
The standard battery life is 1 to 2 years.
(The card key battery life is about a year
and a half.)
●
If the battery becomes low, an alarm will
sound in the cabin when the engine
<hybrid system> is stopped.
●
As the electronic key always receives
Keys
Key types
A
B
C
D
103
3-1. Key information
3
Be
fore
dri
ving
radio waves, the battery will become
depleted even if the electronic key is not
used. The following symptoms indicate
that the electronic key battery may be
depleted. Replace the battery when nec-
essary. (
• The smart access system with push-but-
ton start or the wireless remote control
does not operate.
• The detection area becomes smaller.
• The LED indicator on the key surface
does not turn on.
●
To avoid serious deterioration, do not
leave the electronic key within 3 ft. (1 m)
of the following electrical appliances that
produce a magnetic field:
• TVs
• Personal computers
• Cellular phones, cordless phones and
battery chargers
• Recharging cellular phones or cordless
phones
• Table lamps
• Induction cookers
■
Replacing the battery
■
Confirmation of the registered key
number
The number of keys already registered to
the vehicle can be confirmed. Ask your
Lexus dealer for details.
■
If “A New Key has been Registered
Contact Your Dealer for Details” is
shown on the multi-information display
This message will be displayed each time
the driver’s door is opened when the doors
are unlocked from the outside for approxi-
mately 10 days after a new electronic key
has been registered.
If this message is displayed but you have not
had a new electronic key registered, ask
your Lexus dealer to check if an unknown
electronic key (other than those in your
possession) has been registered.
NOTICE
■
To prevent key damage
●
Do not drop the keys, subject them to
strong shocks or bend them.
●
Do not expose the keys to high tem-
peratures for long periods of time.
●
Do not get the keys wet or wash them
in an ultrasonic washer etc.
●
Do not attach metallic or magnetic
materials to the keys or place the keys
close to such materials.
●
Do not disassemble the keys.
●
Do not attach a sticker or anything else
to the surface of the electronic key.
●
Do not place the keys near objects that
produce magnetic fields, such as TVs,
audio systems and induction cookers.
●
Do not place the keys near medical
electrical equipment such as low-fre-
quency therapy equipment or micro-
wave therapy equipment, and do not
receive medical attention with the keys
on your person.
■
Carrying the electronic key on your
person
Carry the electronic key 3.9 in. (10 cm)
or more away from electric appliances
that are turned on. Radio waves emitted
from electric appliances within 3.9 in. (10
cm) of the electronic key may interfere
with the key, causing the key to not func-
tion properly.
■
In case of a smart access system with
push-button start malfunction or
other key-related problems
■
When an electronic key is lost
■
Handling the card key (if equipped)
●
Do not apply excess force when insert-
ing the mechanical key into the card
key. Doing so may damage the card
key.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст