Lexus LX600 (2022 year). Manual in english — page 7
123
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
passenger mode is selected.
2
Using the seat adjustment switches
on the driver’s seat, adjust the front
passenger’s seat.
To cancel front passenger mode, press the
mode change button again.
Front passenger mode will be canceled
automatically if the driver’s seat adjustment
switches are not operated for approxi-
mately 30 seconds.
■
Using the Multimedia Display
1
Select
on the Main menu.
2
Select “Seat controls”.
3
Select “Arrangement”.
4
Select the passenger’s seat.
5
Select the button for the desired
operation.
Move the front passenger’s seat
forward and fold the seatback and
head restraint. (extra front)
Move the front passenger’s seat
rearward and the seatback and
head restraint to the upright posi-
tion.
To stop the front passenger’s seat while it is
moving, select the
or
passenger’s
seat operation button or press the seat
switch.
Folds the rear display
Press it again to extend them to the original
position.
■
Operating the foldable head restraint
using the front passenger’s seat adjust-
ment switches
When the front passenger’s head restraint
is folded forward and the front passenger’s
door is open, if the front passenger’s seat
adjustment switches are used to move the
seat backward or recline the seatback, the
head restraint will move to the upright posi-
tion automatically when the switch is
released.
To stop the operation of the front passen-
ger’s head restraint part-way, perform any
of the following operations:
●
Operate any front passenger’s seat
adjustment switch.
●
Press the “SET” button.
●
Press the “1”, “2” or “3” button.
●
Press the seat switch.
■
Operation of the front passenger’s seat
using the Multimedia Display will be
canceled when
In the following situations, the front passen-
ger’s seat cannot be operated using the
Multimedia Display:
●
The engine switch is in ACC or OFF.
●
The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger’s seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.
A
B
A
B
C
124
3-3. Adjusting the seats
●
The front passenger’s seat belt is fas-
tened.
●
The front passenger’s door is open. (The
front seat will not move forward.)
1
Display the home screen on the
Rear Multi Operation Panel
(
P.381) and then select “Seat”.
2
Select “Passenger”.
3
Select the button for the desired
operation.
When the operating conditions are not
met, the buttons will be grayed out.
Adjust the angle of the front pas-
senger’s seat seatback
The seatback will move while a button is
touched and held.
Move the front passenger’s seat
forward or backward
The seat will move while a button is
touched and held.
Folds the rear display
Press it again to extend them to the original
position.
Move the front passenger’s seat
forward and fold the seatback for-
ward.
The head restraint will also fold forward.
To stop the front passenger seat while it is
moving, touch “STOP”.
Move the front passenger’s seat
backward and the seatback to the
upright position.
The head restraint will also move to the
upright position.
■
Operating the front passenger’s seat
from the rear seat
●
In the following situations, the front pas-
senger’s seat cannot be operated using
the Rear Multi Operation Panel:
• The engine switch is in ACC or OFF.
• The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger’s seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.
• The front passenger’s seat belt is fas-
tened.
• The front passenger’s door is open. (The
front seat will not move forward.)
Operating the front passenger’s
seat from the rear seat (4-pas-
senger models)
A
B
C
D
E
125
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
Second seat
Pull the lever and adjust the seatback
Third seat (if equipped)
Press the switch and adjust the seat-
back
■
Folding down second center seatback
Pull the center seatback lock release lever
behind the seatback and fold it down.
To return the center seatback to its original
position, lift it up until it locks.
Rear seats (5-passenger and
7-passenger models)
The reclining angle can be adjusted
and the seatback can be folded by
operating the lever or switch.
Adjustment procedure
WARNING
■
When folding the seatbacks down
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Do not fold the seatbacks down while
driving.
●
Stop the vehicle on level ground, set
the parking brake and shift the shift
lever to P.
●
Do not allow anyone to sit on a folded
seatback or in the luggage compart-
ment while driving.
●
Do not allow children to enter the lug-
gage compartment.
■
Adjusting the reclining angle
Do not fold the seatback more than
required. During a collision, your body
could slip beneath the seat belt resulting
in extreme pressure being applied to
your abdomen, or the shoulder belt
could wrap around your neck, which may
result in death or serious injury.
NOTICE
■
When operating the rear seat
●
Be careful that your hands and legs do
not get caught in moving parts or con-
nection areas.
●
Do not arrange seats while they are
occupied.
126
3-3. Adjusting the seats
For easy access to the third seat, per-
form
1
in “Tumbling the second seats”.
(
■
Before tumbling the second seats
1
Stow the seat belt buckles and
lower the head restraints to the
lowest position.
Use the band to secure the center seat
buckle.
2
Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.
This prevents the shoulder belt from being
damaged.
Make sure that the seat belts are removed
from the hangers before using them.
■
Tumbling the second seats (manual
type)
1
Pull the lever
The seatback is folded forward and the
seat springs up.
2
Left-hand side seat only: Open the
cover and then attach the hook to
the assist grip to prevent the seat
from moving
When entering and exiting the
third seat (if equipped)
When tumbling the second seats
127
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
3
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
■
Tumbling the second seats (power
type)
1
Press and hold the switch
The front seat will move forward and stop.
When the operation has been stopped,
release the switch.
2
After the front seat has stopped,
release the switch.
The seatback is folded forward and the
seat springs up.
3
Left-hand side seat only: Open the
cover and then attach the hook to
the assist grip to prevent the seat
from moving
4
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
128
3-3. Adjusting the seats
■
The second seats (power type) can be
operated when
When the engine switch is OFF, or ON
with the shift lever in P.
■
When tumbling the second seat (power
type)
●
In the following situations, the second
seat does not tumble properly and oper-
ation stops.
• The seatback is folded forward
• The center seat is folded forward
• The armrest is being used
●
If an object is placed on the seat cushion,
the tumbling operation may stop.
1
Left-hand side seat only: Detach
the hook from the assist grip
If detaching from the assist grip is difficult,
loosen the belt.
WARNING
■
When stowing the second seat
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Check that there is no luggage and
that there are no other people around
the seat before stowing operation.
●
Do not insert hands or feet into the
moving parts of the seat.
●
Do not allow children to operate the
seat.
■
When tumbling the second seat
●
Do not sit on or place anything on the
seatback while driving.
●
Be sure to install the seat hook covers
on the seat hooks, or you may get
burned when they become hot.
●
Do not tumble the second seat with
any electrical devices left connected
to the accessory outlet or charging
USB port on the rear of the console
box. The second seat could strike the
electrical device and damage it.
●
Left-hand side seat only: Be sure to
secure the seat using the hook after
tumbling the second seat. If the seat is
not secured, the seat may return while
driving, resulting in serious injury.
●
Right-hand side seat only: Do not drive
the vehicle with the seat tumbled. If the
second seat interferes with the front
seat, the SRS airbag may not deploy
properly or may incorrectly deploy,
resulting in death or serious injury.
Returning the second seat to its
original position
129
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
2
Left-hand side seat only: Stow the
hook and tumble band, and then
close the cover
3
Return the seat to its original posi-
tion.
Push the seat until it is locked.
4
Lift the seatback.
Lift it until it is locked.
Power type: return the front seat to the
original position. When a front seat is close
to a second seat, the operation of the front
seat may be restricted.
■
If you cannot raise the seatback
1
Pushing on the lower front edge of the
seatback to slacken the seat belt.
2
Let the seat belt retract a little.
WARNING
■
When returning the seat to its origi-
nal position
●
Make sure the seat legs are securely
latched to the floor when putting back
the seats.
130
3-3. Adjusting the seats
Left seat return switch
Left seat stow switch
Right seat return switch
Right seat stow switch
Operation can also performed using both
the seat and back door switches.
■
The third power seats can be operated
when
When the engine switch is OFF, or ON
with the shift lever in P
■
Switch operation
●
Do not release the switch while the third
seat is operating. Releasing the switch
will cause the seat to stop operating and
will sound a (continuous) buzzer. Press
the switch again to stop the buzzer.
●
If the third seat is close to the second seat
or other surrounding parts, third seat
movement may be restricted.
■
If the warning buzzer sounds continu-
ously
If a system malfunction occurs, the warning
buzzer may continue to sound while the
engine switch is on. In this case, perform the
following.
1
Press and hold the return switch on the
back door
2
Press the stow switch on the seat 5
times within 10 seconds, and check that
the buzzer sounds 3 times (do not
release the return switch on the back
door until the buzzer sounds 3 times)
3
Press and hold the return switch on the
seat or back door
After the seat is stowed, the warning buzzer
will stop.
If the malfunction does not disappear even
after performing this procedure above,
have the vehicle inspected by your Lexus
dealer.
■
Before stowing the third seats
1
Pass the seat belts through the seat
belt hangers and secure the seat
belt plates.
This prevents the shoulder belt from being
damaged.
Make sure that the seat belts are removed
WARNING
●
When returning the second seat to the
original position, be careful not to get
your hand or foot of the third seat pas-
sengers caught between the second
seat and the floor.
■
After returning the seat to its original
position
●
After returning the seat to its original
position, gently shake it to the front
and rear and check that it is secure
●
Do not pinch the seat belt
●
Make sure that the seat belt is
removed from the hanger as before
Third power seat control
switches (if equipped)
A
B
C
D
When stowing the third seat (if
equipped)
131
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
from the hangers before using them.
2
Adjust the seatback of the second
seat so that it does not interfere
with the third seat. (
■
Stowing the third seat
Press and hold the stow switch to stow
the third seat
After the buzzer sounds twice, the seat-
back will be folded down and the head
restraint and seat cushion will be automati-
cally stowed in the floor.
When the seat has been stowed, the
buzzer will sound twice and operation will
be automatically stopped. When the oper-
ation has been stopped, release the switch.
1
Push and hold the return switch to
return the third seats.
After the buzzer sounds twice, the seat-
back and seat cushion will be started to
move. Make sure not to release the switch
before the operation has completed.
When the seat has been returned, the
buzzer will sound twice and operation will
be automatically stopped. When the oper-
WARNING
■
When stowing the third seats
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Check that there is no luggage and
that there are no other people around
the seat before stowing operation.
●
Do not insert hands or feet into the
moving parts of the seat.
●
Do not allow children to operate the
seat.
●
Do not use the seat if only the seat
cushion has been stowed.
NOTICE
■
When stowing the third seats
If there is the luggage cover attached to
the vehicle, remove the luggage cover.
(
P.416) The third seat could strike the
luggage cover and damage it.
Returning the third seat (if
equipped) to its original position
132
3-3. Adjusting the seats
ation has been stopped, release the switch.
2
Lift the head restraint
Auto arrangement switch
Third seat return switch (left side)
Third seat stow switch (left side)
Second seat switch (left side)
Third seat return switch (right side)
Third seat stow switch (right side)
Second seat switch (right side)
The switches equipped differ depend-
ing on the model or options.
■
Operating the second seat
Press and hold the second seat switch
The seatback is folded forward.
When returning the second seat to the
original position:
WARNING
■
After returning the seat to its original
position
●
Do not pinch the seat belt
●
Make sure that the seat belt is
removed from the hanger as before
●
Lift the head restraint to its original
position
Luggage compartment control
switches (if equipped)
A
B
C
D
E
F
G
133
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
■
Operating the third seat
■
Stowing the second and third seat
Press and hold the auto arrangement
switch
Stowing the second and third seat.
When returning the seat to the original
position:
■
The third power seats can be operated
when
■
Switch operation
■
If the warning buzzer sounds continu-
ously
134
3-3. Adjusting the seats
■
Automatic operation
The seat can be moved to preset posi-
tions.
1
Display the home screen on the
Rear Multi Operation Panel
(
P.381) and then select “Seat”.
2
Select “Left” or “Right”.
3
Select the desired preset button.
When the operating conditions are not
met, the preset buttons will be grayed out.
Fold forward the seatback of the
Rear seat (4-passenger
models)
WARNING
■
When adjusting the seat position
●
Take care when adjusting the seat
position to ensure that other passen-
gers are not injured by the moving
seat.
●
When adjusting the rear seat with an
ottoman, make sure there is sufficient
space so that a foot does not get
caught between the ottoman and front
passenger seat.
■
Seat adjustment
To reduce the risk of sliding under the lap
belt during a collision, do not recline the
seat more than necessary.
If the seat is too reclined, the lap belt may
slide past the hips and apply restraint
forces directly to the abdomen, or your
neck may contact the shoulder belt,
increasing the risk of death or serious
injury in the event of an accident.
Adjustments should not be made while
driving as the seat may unexpectedly
move and cause the driver to lose con-
trol of the vehicle.
■
Using the ottoman
●
Do not sit on the ottoman.
If someone sits on the ottoman, the seat
belt cannot be fitted properly, and they
may be thrown from the seat, resulting in
death or serious injury in the event of a
sudden stop, sudden swerve or accident.
●
When getting in or out of the vehicle,
retract the ottoman. If the ottoman is
not retracted, it may cause a fall,
resulting in injury.
●
Do not operate the ottoman when the
vehicle is moving.
●
Do not allow anyone to put their hands
or feet under the rear seat when stow-
ing the ottoman.
NOTICE
■
To prevent an ottoman malfunction
●
Do not place any objects in the rear
seat footwell that could prevent the
operation of the ottoman.
●
Do not place heavy luggage on the
ottoman.
●
Do not place any objects under the
ottoman while it is raised for use. These
objects may interfere with the ottoman
being folded, causing damage to the
ottoman or the objects themselves.
■
To prevent a rear display malfunction
(rear seat with ottoman)
Do not attempt to move the rear display
by hand, as doing so may damage the
rear display.
Adjustment procedure
A
135
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
seat with ottoman, and then fold the
seatback of the rear seat (relax
mode)
The seat with ottoman moves forward, and
the head restraint also folds forward.
To stop the front passenger seat while it is
moving, touch “STOP”.
Moves the rear seat to the upright
position (Business Mode)
Folds the rear display (rear seat
with ottoman)
Press it again to extend them to the original
position.
■
Manual operation
1
Display the home screen on the
Rear Multi Operation Panel
(
P.381) and then select “Seat”.
2
Select “Left” or “Right”.
3
Select the button for the desired
adjustment.
Seatback angle adjustment
Seat cushion (front) angle adjust-
ment
Ottoman angle adjustment (if
equipped)
Seat position adjustment (front pas-
senger’s seat)
Seat position adjustment (rear seat)
(if equipped)
The part will move while a button is
touched.
■
Operating conditions of Business Mode
When the rear seat belt is fastened, Busi-
ness Mode cannot be selected.
■
The rear seat with an ottoman cannot be
moved to Relaxation Mode when
In the following situations, Relaxation Mode
cannot be selected:
●
The engine switch is in ACC or OFF.
●
The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger’s seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.
●
The front passenger’s seat belt is fas-
tened.
●
The front passenger’s door is open.
■
Pre-collision seatbacks for the passen-
ger seats
1
Select
on the Main menu.
2
Select “Seat controls”.
3
Select “Arrangement”.
4
Select the rear seat.
5
Select “Return”.
The rear seat will move to the upright posi-
B
C
A
B
C
D
Returning the rear seat from the
front seats
E
136
3-3. Adjusting the seats
tion.
■
Operation of the rear seats from the
front seats
In the following situations, the rear seats
cannot be operated from the front seats.
●
When the weight of an occupant, heavy
object, etc. is detected on a rear seat
Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the engine
switch is turned off and the doors are
locked.
●
When the rear seat belt is fastened.
The rear seat relaxation system utilizes
pneumatic chambers, and applies
pressure to the occupant’s body at dif-
ferent modes and intensities.
To display the rear seat relaxation sys-
tem screen, display the home screen
on the Rear Multi Operation Panel
(
P.381) and then select “Relax-
ation”.
Touch to select the desired rear
seat.
Touch to select the desired mode.
When a button is touched, operation will
begin.
Touch to adjust the intensity.
The intensity can be adjusted in 5 steps.
Touch to stop the operation.
If a seat is not occupied, do not operate the
rear seat relaxation system for that seat.
■
Relaxation system
●
Operating conditions
• The engine switch is in ON.
• The temperature in the cabin is not
extremely high.
• The weight of an occupant is detected on
the rear seat or the rear seat belt is fas-
tened.
Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the engine
switch is turned off and the doors are
locked.
●
Automatic stop function
• The operation will be canceled automati-
cally after approximately 15 minutes.
WARNING
■
When returning the rear seats to the
neutral position
To avoid injuring the rear passengers,
wait until they have gotten out of the
vehicle before operating the switch.
Rear seat relaxation system
A
B
C
D
137
3-3. Adjusting the seats
3
Be
fore
d
riv
in
g
■
Front seats (manual head
restraints) and outer second seats
1
Up
2
Down
Push the head restraint down while press-
WARNING
■
Using the relaxation system
●
Those who are pregnant, have
recently given birth, or suffer from ail-
ments requiring rest (heart disease
etc.) should consult a doctor before
use.
●
Do not allow children to use the relax-
ation function.
●
Do not use immediately after consum-
ing a meal or alcohol, or for an
extended period of time.
●
If you feel sick while using the relax-
ation function, immediately discon-
tinue use.
Head restraints
Head restraints are provided for all
seats.
WARNING
■
Head restraint precautions
Observe the following precautions
regarding the head restraints.
Failure to do so may result in death or
serious injury.
●
Use the head restraints designed for
each respective seat.
●
Adjust the head restraints to the cor-
rect position at all times.
●
Manual head restraints: After adjust-
ing the head restraints, push down on
them and make sure they are locked in
position.
●
Do not drive with the head restraints
removed.
●
Vehicles with third seat: When sitting
on the third seat, make sure that the
head restraint is not folded.
Vertical adjustment
138
3-3. Adjusting the seats
ing the lock release button
.
■
Front seats (power head restraints)
1
Up
2
Down
■
Second center seat (if equipped)
1
Up
2
Down
Push the head restraint down while press-
ing the lock release button
.
■
Adjusting the height of the head
restraints (front and second seats)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
Manual head restraints
The position of the head restraint can
be adjusted forward in 4 stages.
If the head restraint is pulled forward from
the foremost position, it will return to the
rearmost position.
Power head restraints
1
Forward
2
Backward
Folding the head restraint
Fold the head restraint while pulling the
strap.
To return the head restraint, pull it up.
A
A
Horizontal adjustment (if
equipped)
Folding the head restraint (third
seats) (if equipped)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст