Lexus ES300 (1997 year). Manual — part 292
BR07D–01
R00327
W04507
–
BRAKE
FRONT SPEED SENSOR
BR–59
1174
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
DISCONNECT SPEED SENSOR CONNECTOR
(a)
Remove the fender liner.
(b)
Disconnect the speed sensor connector.
2.
REMOVE SPEED SENSOR
(a)
Remove the bolt, flexible hose and speed sensor harness
clamp from the shock absorber.
Torque: 29 N·m (300 kgf·cm, 21 ft·lbf)
(b)
Remove the resin clip and clamp bolt holding the sensor
harness to the body.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(c)
Remove the speed sensor from the steering knuckle.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
BR07E–04
BR–60
–
BRAKE
FRONT SPEED SENSOR
1175
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
AFTER INSTALLATION, CHECK SPEED SENSOR SIGNAL (See page
)
BR07F–04
W03274
W03274
N·m (kgf·cm, ft·lbf)
: Specified torque
5.4 (55, 48 in.·lbf)
Rear Speed Sensor
7.8 (80, 69 in.·lbf)
5.4 (55, 48 in.·lbf)
–
BRAKE
REAR SPEED SENSOR
BR–61
1176
1997 LEXUS ES300 (RM511U)
REAR SPEED SENSOR
COMPONENTS
BR07G–01
R00330
W04508
BR–62
–
BRAKE
REAR SPEED SENSOR
1177
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
DISCONNECT SPEED SENSOR CONNECTOR
(a)
Remove the seat cushion and seatback.
(b)
Disconnect the speed sensor connector, and pull out the
sensor wire harness with the grommet.
2.
REMOVE SPEED SENSOR
(a)
Remove the 2 clamp bolts holding the sensor wire har-
ness to the body and shock absorber.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(b)
Remove the speed sensor from the axle carrier.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст