Lexus ES300 (1997 year). Manual — part 214
BO09V–01
BO–38
–
BODY
LUGGAGE COMPARTMENT DOOR AND HINGE
1216
1997 LEXUS ES300 (RM511U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page
).
BO09W–01
–
BODY
LUGGAGE COMPARTMENT DOOR AND HINGE
BO–39
1217
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
BO09X–03
H02890
N·m (kgf·cm, ft·lbf) : Specified torque
Fuel Filler
Opening Lid
Fuel Tank
Cap Hanger
Fuel Tank Cap
Ring
Fuel Lid Lock Assembly
Fuel Filler Opening
Lid Lock Retainer
Fuel Tank
Shield
Inner LH Cover
Luggage Compartment Trim
Luggage Compartment Floor Mat
RH Rear Floor
Finish Side Plate
Rear Floor Finish Plate
LH Rear Floor
Finish Side Plate
5.5 (56, 49 in.·lbf)
5.5 (56, 49 in.·lbf)
BO–40
–
BODY
FUEL LID
1218
1997 LEXUS ES300 (RM511U)
FUEL LID
COMPONENTS
BO09Y–03
N21403
N21404
N21401
–
BODY
FUEL LID
BO–41
1219
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
REMOVE THESE PART:
(a)
Luggage compartment floor mat
(b)
Rear floor finish plate
(c)
LH rear floor finish side plate
(d)
Inner LH cover luggage compartment trim
2.
REMOVE FUEL LID LOCK ASSEMBLY
(a)
Remove the nut from the fuel lid side.
(b)
Remove the nut and lock assembly, then disconnect the
connector.
3.
REMOVE FUEL INLET PIPE SHIELD
(a)
Remove the ring.
(b)
Remove the fuel tank cap and shield.
CAUTION:
Always keep the tank cap closed when it is not re-
quired to be open.
Keep all fire away during the operation.
(c)
Install the cap quickly.
4.
REMOVE FUEL FILLER OPENING LID
(a)
Using a drill, drill out the rivet heads.
(b)
Remove the fuel filler opening lid.
(c)
Remove the fuel tank cap hanger and lock retainer from
the opening lid.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст