Lexus ES300 (1997 year). Manual — part 230
BO3EE–01
N21419
N21418
N21416
N21417
BO–102
–
BODY
FRONT SEAT
1280
1997 LEXUS ES300 (RM511U)
REASSEMBLY
1.
INSTALL RECLINING MOTOR
Connect the No.2 drive cable, then install the reclining motor
with 2 screws.
2.
INSTALL SLIDE MOTOR
Connect the No.1 drive cable, then install the slide motor with
2 screws.
3.
INSTALL FRONT VERTICAL MOTOR
Install the rear vertical motor with 2 screws.
4.
INSTALL REAR VERTICAL MOTOR
Install the front vertical motor with 2 screws.
5.
INSTALL LOWER SEAT CUSHION SHIELD
6.
INSTALL SEAT CUSHION COVER
(a)
Install the seat cushion cover with new hog rings to seat
cushion pad.
(b)
Install the seat cushion cover with pad to the seat cushion
frame with new hog rings.
HINT:
Install the hog rings to prevent wrinkles as least as possible.
7.
INSTALL SEAT CUSHION ASSEMBLY
Install the seat cushion assembly with 4 bolts.
–
BODY
FRONT SEAT
BO–103
1281
1997 LEXUS ES300 (RM511U)
8.
INSTALL SEATBACK COVER
(a)
Install the seatback cover with new hog rings to the seat-
back pad.
HINT:
Install the hog rings to prevent wrinkles as least as possible.
(b)
Install the seatback cover with pad to the seatback frame
with new hog rings.
HINT:
Install the hog rings to prevent wrinkles as least as possible.
(c)
Install the headrest supports.
9.
INSTALL SEATBACK ASSEMBLY
10.
INSTALL THESE PARTS:
(a)
Seat cushion inner shield
(b)
Seat cushion shield
(c)
Switch knobs
(d)
Headrest
BO0B6–01
BO–104
–
BODY
FRONT SEAT
1282
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
BO0B7–05
H01613
Headrest
Headrest Support
Belt Guide
Hog Ring
Seatback Pad with Frame
Seatback Cover
Seat Cushion Cover
Seat Cushion Pad with Frame
Center Armrest Bracket
Center Armrest Hinge
Center Armrest Pad
Center Armrest Cover
Hog Ring
: Specified torque
N·m (kgf·cm, ft·lbf)
Non–reusable part
18 (185, 13)
–
BODY
REAR SEAT
BO–105
1283
1997 LEXUS ES300 (RM511U)
REAR SEAT
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст