Lexus ES300 (1997 year). Manual — part 578
SA0ED–01
SA–32
–
SUSPENSION AND AXLE
FRONT SHOCK ABSORBER
1080
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
).
AFTER INSTALLATION, CHECK FRONT WHEEL ALIGNMENT (See page
SA0ED–01
SA–32
–
SUSPENSION AND AXLE
FRONT SHOCK ABSORBER
1080
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
).
AFTER INSTALLATION, CHECK FRONT WHEEL ALIGNMENT (See page
SA0EF–03
W03478
W03478
w/ ELECTRONIC MODULATED
SUSPENSION
w/ ELECTRONIC
MODULATED
SUSPENSION
49 (500, 36)
* 36 (365, 26)
80 (820, 59)
14 (140, 9)
80 (820, 59)
211 (2,150, 156)
39 (400, 29)
7.8 (80, 69 in.·lbf)
49 (500, 36)
294 (3,000, 217)
127 (1,300, 94)
206 (2,100, 152)
206 (2,100, 152)
127 (1,300, 94)
123 (1,250, 90)
107 (1,090, 79)
29 (300, 90)
Clip
206 (2,100, 152)
Absorber Control
Sub–wire Harness
Shock
Absorber
Cap
Suspension
Support No.2
Suspension Support
Spring Bumper
Lower
Insulator
Bearing
Spring
Upper
Seat
Upper
Insulator
Coil Spring
Stabilizer
Bar Link
Shock Absorber
with Coil Spring
Front Drive Shaft
Tie Rod End
Shock
Absorber
ABS Speed Sensor
Lock Cap
Dust
Deflector
ABS Speed Sensor
Wire Harness
Brake Caliper
Cotter Pin
Cotter Pin
Lower Ball Joint
Bushing
Lower Suspension Arm
Lower Suspension
Bushing Stopper
N·m (kgf·cm, ft·lbf) : Specified torque
Non– reusable part
For use with SST
*
Cotter Pin
Disc
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
SA–33
1081
1997 LEXUS ES300 (RM511U)
FRONT LOWER SUSPENSION ARM
COMPONENTS
SA0EG–02
W03202
W03203
W03204
SA–34
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
1082
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
REMOVE FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2.
DISCONNECT LOWER SUSPENSION ARM FROM
LOWER BALL JOINT
Remove the 2 nuts and bolt.
Torque: 127 N·m (1,300 kgf·cm, 94 ft·lbf)
3.
REMOVE LOWER SUSPENSION ARM
(a)
Remove the 2 bolts on the front side of the lower suspen-
sion arm.
Torque: 206 N·m (2,100 kgf·cm, 152 ft·lbf)
(b)
Remove the bolt and nut on the rear side of the lower sus-
pension arm.
Torque: 206 N·m (2,100 kgf·cm, 152 ft·lbf)
(c)
Remove the lower suspension arm.
(d)
Remove the lower suspension arm bushing stopper from
the lower suspension arm shaft.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст