Lexus ES300 (1997 year). Manual — part 203
BE061–01
–
BODY ELECTRICAL
AUDIO SYSTEM
BE–147
1531
1997 LEXUS ES300 (RM511U)
TROUBLESHOOTING
NOTICE:
When replacing the internal mechanism (computer part) of the audio system, be careful that no part
of your body or clothing comes in contact with the terminals of the leads from the IC, etc. of the re-
placement part (spare part).
HINT:
This inspection procedure is a simple troubleshooting which should be carried out on the vehicle during sys-
tem operation and was prepared on the assumption of system component troubles (except for the wires and
connectors, etc.).
Always inspect the trouble taking the following items into consideration.
Open or short circuit of the wire harness
Connector or terminal connection fault
For audio systems with anti–theft system, troubleshooting items marked ( * ) indicate that ”Trou-
bleshooting for ANTI–THEFT SYSTEM” should be carried out first.
Problem
No.
Radio
Radio not operating when power switch turned to ’ON’.
1
Display indicates when power switch turned to ’ON’, but no sound (including
’noise’) is produced.
2
Noise present, but AM – FM not operating.
3
Any speaker does not work.
4
Either AM or FM does not work.
5
Few preset turning bands.
5
Reception poor.
6
Sound quality poor.
7
Preset memory disappears.
8
Tape Player
Cassette tape cannot be inserted.
9
Cassette tape inserts, but no power.
10
Power coming in, but tape player not operating.
11
Any speaker does not work.
12
Sound quality poor.
13
Tape jammed, malfunction with tape speed or auto–reverse.
14
Cassette tape will not eject.
15
CD Player
CD cannot be inserted.
16
CD inserted, but no power.
17
Power coming in, but CD player not operating.
18
Sound jumps.
19
Sound quality poor (Volume faint).
20
Any speaker does not work.
21
CD will not be ejected.
22
Noise
Noise occurs
23
Noise produced by vibration or shock while driving.
24
Noise produced when engine starts.
25
The term ”AM” includes LW,MW and SW, and the term ”FW” includes UKW.
V08418
Turn ignition Key from LOCK position to ACC position.
Troubleshooting for ANTI–THEFT SYSTEM
Display A:
ID Number is set.
Display E:
ANTI–THEFT SYSTEM opera-
tion condition. (ID number input
error 10 times or more.)
Display B
”SEC display disappears after 1
second.
Radio switch ON.
Take to designated radio
service station.
Display B
Display D
Refer to each
malfunction item.
Normal
operation.
Radio switch ON.
Normal operation.
Cancel ID number, refer to each malfunction item.
Yes
No
OK
NG
ANTI–THEFT SYSTEM operation condition. (ID number input error 9 times or less.)
Input ID number to cancel ANTI–THEFT SYSTEM, and check display.
Display A
→
B
Display B
Display E
Display C
→
A
Radio switch ON.
Refer to each
malfunction item.
Take to designated
radio service station.
ANTI–THEFT SYSTEM not can-
celled. (ID number input error 10
times or less.)
Display D
ANTI–THEFT SYSTEM cancelled.
Check audio system again.
Normal operation.
OK
NG
Cancel ID number, refer to each malfunction item.
Liquid Crystal Display (LCD) or VFD for Audio System
Display ”A”
Display ”B”
Display ”C”
Display ”D” Example:
Display ”E”
2 DIN Type
1 DIN Type
Blank
No Illumination
2 DIN Type
1 DIN Type
2 DIN Type
1 DIN Type
Error Times
2 DIN Type
1 DIN Type
Radio Display
1 DIN Type
2 DIN Type
HINT:
Refer to Owner’s Manual for operation details of ANTI–THEFT SYSTEM.
When the ID number has been cancelled, reset the same number after completing the operation, or
inform the customer that it has been cancelled.
BE–148
–
BODY ELECTRICAL
AUDIO SYSTEM
1532
1997 LEXUS ES300 (RM511U)
V08480
1
Radio
RADIO NOT OPERATING WHEN POWER SWITCH TURNED TO ”ON”
+ B wire harness faulty.
GND faulty.
Power amplifier or wire harness faulty.
Power amplifier or wire harness faulty.
GND faulty.
Check if GND (wire harness side) to power amplifier is OK?
Is tape player operating normally?
Check if RAD–No.2 fuse is OK?
Is ACC applied to power amplifier?
Is + B applied to power amplifier?
Yes
NG
No
OK
No
No
No
No
OK
OK
OK
Yes
Yes
Yes
Yes
NG
NG
NG
Check if RAD–No.1 fuse is OK?
Is + B applied to radio assembly?
Radio assembly faulty.
Replace fuse.
ACC wire harness faulty.
Is ACC applied to radio assembly?
Check if GND (wire harness side) to radio assembly is OK?
Radio assembly faulty.
Replace fuse.
–
BODY ELECTRICAL
AUDIO SYSTEM
BE–149
1533
1997 LEXUS ES300 (RM511U)
*
V08481
2
Radio
DISPLAY INDICATES WHEN POWER SWITCH TURNED TO
”ON”, BUT NO SOUND (INCLUDING ”NOISE”) IS PRODUCED
+ B wire harness faulty.
GND faulty.
Power amplifier faulty.
Speaker wire harness faulty.
GND faulty.
Check if GND (wire harness side) to power amplifier is OK?
Is tape player operating normally?
Check if RAD–No.2 fuse is OK?
Is ACC applied to power amplifier?
Is + B applied to power amplifier?
Yes
NG
No
OK
No
No
No
No
OK
OK
OK
Yes
Yes
Yes
Yes
NG
NG
NG
Check if RAD–No.1 fuse is OK?
Is + B applied to radio assembly?
Radio assembly faulty. Recheck system after repair.
Replace fuse.
ACC wire harness faulty.
Is ACC applied to radio assembly?
Check if GND (wire harness side) to radio assembly is OK?
Radio assembly faulty.
Replace fuse.
Is there continuity in speaker wire harness?
Temporarily install another speaker. Functions OK?
Hiss noise from speaker?
Yes
Yes
No
No
No
Yes
Power amplifier faulty.
Power amplifier faulty.
Recheck system after repair.
Speaker faulty.
BE–150
–
BODY ELECTRICAL
AUDIO SYSTEM
1534
1997 LEXUS ES300 (RM511U)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст