Lexus ES300 (1997 year). Manual — part 43
AC0AI–02
N21066
AC–56
–
AIR CONDITIONING
EXPANSION VALVE
1613
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
REMOVE EVAPORATOR
(See page
2.
REMOVE EXPANSION VALVE
Using a hexagon wrench, remove the 2 bolts and separate the
expansion valve, evaporator and tube.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
HINT:
At the time of installation, please refer to the following item.
Lubricate 4 new O–rings with compressor oil and install the tube
and valve.
AC0AJ–01
–
AIR CONDITIONING
EXPANSION VALVE
AC–57
1614
1997 LEXUS ES300 (RM511U)
INSTALLATION
Installation is in the reverse order of removal (See page
AC0AK–01
AC–58
–
AIR CONDITIONING
WATER VALVE
1615
1997 LEXUS ES300 (RM511U)
WATER VALVE
ON–VEHICLE INSPECTION
1.
WARM UP ENGINE
2.
DISCONNECT WATER VALVE CONTROL CABLE
3.
INSPECT WATER VALVE OPERATION
(a)
Check that warm air blown out when the water valve lever is moved to ”WARM” position.
(b)
Check that cool air blown out when the water valve is moved to the ”COOL” position.
If operation is not as specified, replace the water valve.
4.
CONNECT WATER VALVE CONTROL CABLE
HINT:
After connection, adjust the control cable.
AC0AL–02
N21070
N21068
Heater Radiator Pipe
Water Valve
Upper
Hose Clip
Marking
Lower
RH
LH
Fr.
Rr.
Marking
Water Hose
Hose Clip
45
±
10
°
N21071
N21072
–
AIR CONDITIONING
WATER VALVE
AC–59
1616
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
DRAIN ENGINE COOLANT FROM RADIATOR
HINT:
It is not necessary to drain out all the coolant.
2.
DISCONNECT WATER HOSES FROM WATER VALVE
AND HEATER RADIATOR PIPE
(a)
Using pliers, grip the claws of the hose clip and slide the
hose clip along the hose.
(b)
Disconnect the water hose.
HINT:
At the time of installation, please refer to the following items.
Push the water hose onto the heater radiator pipe as far
as the pipe grommet.
Install the hose clip in a position, as shown in the illustra-
tion.
3.
DISCONNECT WATER VALVE CONTROL CABLE
FROM WATER VALVE
HINT:
At the time of installation, please refer to the following item.
For installing the control cable, refer to ”INSTALLATION”.
4.
REMOVE WATER VALVE
Remove the bolt and water valve.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст