Lexus ES300 (1997 year). Manual — part 289
W03267
W03269
W03270
W03268
W03271
–
BRAKE
ABS ACTUATOR
BR–47
1162
1997 LEXUS ES300 (RM511U)
(c)
Place the ”SHEET P” (SST) on the actuator checker.
SST
09990–00430
4.
INSPECT BRAKE ACTUATOR OPERATION
(a)
Start the engine, and run it at idle.
(b)
Turn the selector switch of the actuator checker to
”FRONT LH” position.
(c)
Push and hold in the MOTOR switch for a few seconds.
(d)
Depress the brake pedal and hold it until step (g) is com-
pleted.
(e)
Push the MAIN push switch, and check that the brake
pedal does not go down.
NOTICE:
Do not keep the MAIN push switch pushed down for more
than 10 seconds.
(f)
Release the switch, and check that the pedal goes down.
(g)
Push and hold in the MOTOR switch for a few seconds,
and check that the pedal returns.
(h)
Release the brake pedal.
(i)
Push and hold in the MOTOR switch for a few seconds.
(j)
Depress the brake pedal and hold it for about 15 seconds.
As you hold the pedal down, push the MOTOR switch for
a few seconds. Check that the brake pedal does not pul-
sate.
(k)
Release the brake pedal.
(l)
Turn the selector switch to ”REAR RH” position.
(m)
Repeat (c) to (j), checking the actuator operation similarly.
(n)
Similarly, inspect ”REAR LH” and ”FRONT RH” position.
HINT:
When inspecting ”FRONT RH” position, push the FRONT RH
switch instead of the MAIN push switch, and you can inspect in
any selector switch position.
W03267
BR–48
–
BRAKE
ABS ACTUATOR
1163
1997 LEXUS ES300 (RM511U)
(o)
Push and hold in the MOTOR switch for a few seconds.
(p)
Stop the engine.
5.
DISCONNECT ACTUATOR CHECKER (SST) FROM
ACTUATOR
Remove the ”SHEET P” (SST) and disconnect the actuator
checker (SST) and sub–wire harness (SST) from the actuator.
SST
09990–00150, 09990–00250, 09990–00300,
09990–00360, 09990–00430
6.
CONNECT CONNECTORS
Connect the 2 connectors to the actuator.
7.
)
BR074–03
W03266
W03266
Cushion
Holder
ABS Actuator
A/C Tube Clamp
Bracket
Actuator Bracket
15 (155, 11)
5.4 (55, 48 in.·lbf)
19 (195, 14)
N·m (kgf·cm, ft·lbf)
: Specified torque
19 (195, 14)
Cushion
–
BRAKE
ABS ACTUATOR
BR–49
1164
1997 LEXUS ES300 (RM511U)
COMPONENTS
BR075–02
W03243
SST
BR–50
–
BRAKE
ABS ACTUATOR
1165
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
REMOVE RIGHT FRONT FENDER LINER
2.
REMOVE A/C TUBE CLAMP BRACKET BOLT
3.
DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the ABS actuator.
SST
09751–36011
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
4.
REMOVE ABS ACTUATOR ASSEMBLY
(a)
Disconnect the 2 connectors.
(b)
Remove the 2 bolts, 2 nuts and ABS actuator assembly.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
5.
REMOVE ABS ACTUATOR
(a)
Remove the 2 nuts and ABS actuator from actuator
bracket.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(b)
Remove the 2 holders and 3 cushions from the ABS ac-
tuator.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст