Lexus ES300 (1997 year). Manual — part 217
N21444
: 2 Clips
Adhesive Tape
BO–50
–
BODY
BODY OUTSIDE MOULDING
1228
1997 LEXUS ES300 (RM511U)
4.
REMOVE QUARTER OUTSIDE MOULDING
(a)
Remove the 2 screws.
(b)
Using a heat light, heat the moulding to 40 – 60
°
C (104
– 140
°
F).
NOTICE:
Do not heat the moulding excessively.
(c)
Cut the adhesive tape with a knife.
NOTICE:
If reusing the moulding, take care not to damage the
moulding.
Do not damage the body.
(d)
Remove the moulding.
BO0A7–01
H01603
Adhesive Tape
Adhesive Tape
Adhesive Tape
Adhesive Tape
Adhesive Tape
Front Fender Moulding
Front Door Outside Moulding
Rear Door Outside Moulding
Quarter Outside Moulding
–
BODY
BODY OUTSIDE MOULDING
BO–51
1229
1997 LEXUS ES300 (RM511U)
INSTALLATION
1.
CLEAN BODY MOUNTING SURFACE
(a)
Using a heat light, heat the body mounting surface to 40
– 60
°
C (104 – 140
°
F).
(b)
Remove adhesive tape from the body.
(c)
Wipe off stains with a cleaner.
2.
CLEAN MOULDING
If reusing the moulding
(a)
Using a heat light, heat the moulding to 20 – 40
°
C (68 –
86
°
F).
NOTICE:
Do not heat the moulding excessively.
(b)
Remove the adhesive tape from the moulding.
(c)
Wipe off stains with a cleaner.
(d)
Apply new adhesive tape to the moulding as shown in the
illustration.
BO–52
–
BODY
BODY OUTSIDE MOULDING
1230
1997 LEXUS ES300 (RM511U)
3.
INSTALL MOULDING
(a)
Using a heat light, heat the body and moulding.
Body: 40 – 60
°
C (104 – 140
°
F)
Moulding: 20 – 30
°
C (68 – 86
°
F)
NOTICE:
Do not heat the moulding excessively.
(b)
Remove the moulding release sheet from the face of
moulding.
NOTICE:
When the moulding release sheet is removed, make sure
that no dirt or dust can get onto the uncoated area.
(c)
Align the bosses with their corresponding holes in the
body, and press firmly on the moulding.
NOTICE:
Do not apply excessive force onto the moulding, but apply
steady pressure with your thumbs.
(d)
Install the moulding.
BO0A8–01
H02704
Roof Side Rail Weatherstrip
Roof Drip Side Finish
Moulding
Front Roof Side
Weatherstrip Retainer
Center Roof Side Rail
Weatherstrip Retaner
–
BODY
ROOF DRIP SIDE FINISH MOULDING
BO–53
1231
1997 LEXUS ES300 (RM511U)
ROOF DRIP SIDE FINISH MOULDING
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст