Lexus NX350h (2022 year). Manual in english — page 32

8

Maintenance and care

8-1. Exterior maintenance and care

Washing the vehicle . . . ..

530

8-2. Cleaning and protecting the ve-

hicle interior

Cleaning the vehicle interi-

or . . . . . . . . . . . . .

536

Cleaning the areas with sat-

in-finish metal accents. ...

538

Cleaning the leather areas..

539

Cleaning the synthetic

leather areas. . . . . . ..

540

Cleaning the air intake vent

and filter. . . . . . . . . .

541

8-3. Maintenance

Maintenance requirements

. . . . . . . . . . . . . ..

545

Scheduled maintenance

outline. . . . . . . . . .

546

Do-it-yourself maintenance

. . . . . . . . . . . . . ..

547

General maintenance . . ..

548

Engine compartment main-

tenance items list . . . . ..

549

Luggage compartment

maintenance item list . . .

550

Vehicle interior mainte-

nance items list . . . . . ...

551

Vehicle exterior mainte-

nance items list . . . . . ..

552

Emission inspection and

maintenance (I/M) pro-
grams
. . . . . . . . . . .

553

8-4. Inspection of consumables

Do-it-yourself service pre-

cautions . . . . . . . . .

554

Opening the hood . . . . ..

556

Engine compartment. . . .

557

Adding washer fluid . . . ..

564

12-volt battery. . . . . . ...

565

Air conditioning filter main-

tenance. . . . . . . . .

568

8-5. Tire maintenance

Tire maintenance . . . . . .

570

Tire inspection items. . . .

571

Run-flat tire features. . . ...

574

Operation of the tire pres-

sure warning system. . .

575

Checking tire inflation pres-

sure. . . . . . . . . . .

586

Lifting the vehicle with a

floor jack. . . . . . . . ..

588

Rotating the tires. . . . . .

589

Wheels. . . . . . . . . .

590

Replacing the tire . . . . .

592

Headlight aim. . . . . . .

601

529

8

Maintenance and car

e

Exterior maintenance and care

Washing the vehicle

WARNING

When washing the vehicle, do not apply water to the inside of the engine compart-
ment.
If water contacts electrical components, it may cause the vehicle to catch fire.

Exhaust gasses cause the exhaust pipes to become quite hot.
When washing the vehicle, be careful not to touch the exhaust pipes until they have
cooled sufficiently. Touching a hot exhaust pipe can cause burns.

NOTICE

To prevent paint deterioration and corrosion of the body and components (wheels,
etc.)

Wash the vehicle immediately in the following cases:

After driving near the sea coast

After driving on salted roads

If coal tar or tree sap is present on the paint surface

If dead insects, insect droppings or bird droppings are present on the paint surface

After driving in an area contaminated with soot, oily smoke, mine dust, iron powder
or chemical substances

If the vehicle becomes heavily soiled with dust or mud

If liquids such as benzine or gasoline are spilled on the paint surface

If the paint is chipped or scratched, have it repaired immediately.

To prevent the wheels from corroding, remove any dirt and store in a place with low
humidity when storing the wheels.

To prevent damage to the windshield wiper arms

When lifting the wiper arms away from the windshield, pull the driver side wiper arm
upward first, and repeat for the passenger side. When returning the wipers to their
original position, do so from the passenger side first.

Perform cleaning in a manner appropriate to each component and its material.

Working from top to bottom, liberally apply water to the vehicle body, wheel
wells and underside of the vehicle to remove any dirt and dust.

Wash the vehicle body using a sponge or soft cloth, such as a chamois.

For hard-to-remove marks, use car wash soap and rinse thoroughly with water.

Wipe away any water.

8-1. Exterior maintenance and care

530

INFORMATION

Self-restoring coat

The vehicle body has a self-restoring coating that is resistant to small surface scratches
caused by a car wash, etc.

The coating lasts for 5 to 8 years from when the vehicle is delivered from the plant.

The restoration time differs depending on the depth of the scratch and outside
temperature.
The restoration time may become shorter when the coating is warmed by applying
warm water.

Deep scratches caused by keys, coins, etc., cannot be restored.

Do not use waxes that contain abrasives.

When using a car wash

If the door handle becomes wet while the electronic key is within the effective range,
the door may lock and unlock repeatedly. In that case, follow the following correction
procedures to wash the vehicle:

Place the key in a position 6 ft. (2 m) or more separate from the vehicle while the
vehicle is being washed.
Take care to ensure that the key is not stolen.

Set the electronic key to battery-saving mode to disable the smart access system with
push-button start.

Brake pads and calipers

Rust may form if the vehicle is parked with wet brake pads or disc rotors, causing them
to stick. Before parking the vehicle after it is washed, drive slowly and apply the brakes
several times to dry the parts.

Using an automatic car wash

NOTICE

Vehicles with rain-sensing windshield wipers:
When using an automatic car wash, move the wiper lever to the off position.
If the wiper lever is in the AUTO position, the wipers may operate unintentionally and the
wiper blades may be damaged.

Perform the following before washing your vehicle:

Fold the mirrors.

Vehicles with power back door:
Turn off the power back door.

8-1. Exterior maintenance and care

531

8

Maintenance and car

e

Start washing from the front of the vehicle.
Extend the mirrors before driving.

Brushes used in automatic car washes may scratch the vehicle surface, parts
(wheel, etc.) and harm your vehicle’s paint.

Depending on the automatic car wash, the rear spoiler may become caught,
preventing it from being washed or causing damage to it.

When it is necessary to set the power switch to ACC with the shift position held
in N, refer to

P.170

.

Using a high pressure washer to wash the vehicle

NOTICE

When washing the vehicle, do not spray any of the cameras or their surrounding area
directly. The shock from high pressure water may cause a camera to malfunction.

Do not bring the tip of the nozzle close to connectors or the boots (rubber or resin
cover) of the following parts.
The parts may be damaged if sprayed by high-pressure water.

Drivetrain related parts

Steering parts

Suspension parts

Brake parts

Keep the tip of the nozzle at least 11.9 in. (30 cm) away from the vehicle body.
Otherwise resin parts, such as the moldings, bumpers, etc., may be deformed and
damaged. Also, do not continuously spray water on the same place.

Do not spray the lower part of the windshield continuously. If water enters the air
conditioning system intake located near the lower part of the windshield, the air
conditioning system may not operate correctly.

Do not wash the underside of the vehicle using a high pressure washer.

When using a high pressure washer, as water may enter the cabin, do not bring the
tip of the nozzle near the gaps around the doors or perimeter of the windows, or
spray these areas continuously.

Cleaning the wheels and wheel ornaments

Perform the following:

Remove any dirt immediately using a neutral cleaning agent.

Wash detergent off with water immediately after use.

8-1. Exterior maintenance and care

532

To protect the finish from damage, make sure to observe the following precau-
tions.

Do not use acidic, alkaline or abrasive cleaners

Do not use hard brushes

Do not use detergent on the wheels when they are hot, such as after driving or
parking in hot weather

Cleaning the bumpers

WARNING

If the paint of the rear bumper is chipped or scratched, the following systems may not
function correctly. If this occurs, consult your Lexus dealer.

Lexus Safety System + 3

BSM

ARFHL (Automatic Rear Flashing Hazard Lights)

Safe Exit Assist (with door opening control)

RCTA

PKSB

*

Do not scrub with abrasive cleaners.

Cleaning and protecting the plated portions

If dirt cannot be removed, clean the parts as follows:

Use a soft cloth dampened with an approximately 5 % solution of neutral
detergent and water to clean the dirt off.

Wipe the surface with a dry, soft cloth to remove any remaining moisture.

To remove oily deposits, use alcohol wet wipes or a similar product.

INFORMATION

Black stainless steel window moldings

*

The stainless steel window moldings are made of black oxide coated stainless steel.
When cleaning the vehicle, do not scrub the moldings with an abrasive cleaner as their
finish may be damaged or the color may change.

* :

If equipped

8-1. Exterior maintenance and care

533

8

Maintenance and car

e

Cleaning the exterior lights

NOTICE

Wash carefully. Do not use organic substances or scrub with a hard brush.
Doing so may damage the surface of the lights.

Do not apply wax to the lights.
Wax may damage the lenses.

Cleaning the windshield

WARNING

Vehicles with rain-sensing windshield wipers:
Move the wiper lever to the off position.
If the wiper lever is in the AUTO position, the wipers may operate unexpectedly in the
following situations, possibly leading serious injury from a hand being caught, or damage
to the wiper blades.

A

Off

B

AUTO

When the upper part of the windshield where the raindrop sensor is located is
touched by hand

When a wet rag or similar is held close to the raindrop sensor

If something bumps against the windshield

8-1. Exterior maintenance and care

534

WARNING

If you directly touch the raindrop sensor body or if something bumps into the raindrop
sensor

INFORMATION

Front side windows water-repellent coating (vehicles with water-repellent coating)

The effectiveness of the water-repellent coating can be extended by paying attention
to the following.

Remove any dirt, etc., from the front side windows regularly.

Do not allow dirt and dust to accumulate on the windows.
If dirty, clean the windows with a soft, damp cloth as soon as possible.

Do not use wax or glass cleaners that contain abrasives when cleaning the win-
dows.

Do not use any metallic objects to remove condensation build up.

When the water-repellent performance has become insufficient, the coating can be
repaired.
Contact your Lexus dealer for details.

Waxing the vehicle

Wax the vehicle when the waterproof coating has deteriorated.
If water does not bead on a clean surface, apply wax when the vehicle body is cool.

8-1. Exterior maintenance and care

535

8

Maintenance and car

e

Cleaning and protecting the vehicle interior

Cleaning the vehicle interior

WARNING

Water in the vehicle

Do not splash or spill liquid in the vehicle, such as on the floor, in the hybrid battery
(traction battery) air vents, and in the luggage compartment. Doing so may cause the
hybrid battery, electrical components, etc., to malfunction or catch fire.

Do not get any of the SRS components or wiring in the vehicle interior wet.
An electrical malfunction may cause the airbags to deploy or not function properly,
resulting in death or serious injury.

Cleaning the interior (especially instrument panel)

Do not use wax polish or a polishing cleaner on the instrument panel. The instrument
panel may reflect off the windshield, obstructing the driver’s view and leading to an
accident, resulting in death or serious injury.

NOTICE

Cleaning solvents

Do not use the following cleaning solvents, as they may discolor the vehicle interior or
cause streaks or damage to painted surfaces:

Areas other than the seats: Organic substances such as benzine or gasoline,
alkaline or acidic solutions, dye, and bleach

Seats: thinner, benzine, alcohol, or alkaline or acidic solutions

Do not use wax polish or a polishing cleaner. The painted surfaces of the instrument
panel or other interior parts may be damaged.

Water on the floor

Do not wash the vehicle floor with water.
If water contacts audio system or other electrical components under the floor carpet, it
may cause the vehicle to malfunction. Water may also cause the body to rust.

When cleaning the inside of the windshield

Do not allow glass cleaner to contact the lens of the front camera. Also, do not touch the
lens.

Cleaning the inside of the windshield and rear window

Do not use glass cleaners to clean the rear window, as this may cause damage to the
rear window defogger heater wires or antenna. Use a cloth dampened with lukewarm
water to gently wipe the window clean. Wipe the window in strokes running parallel to
the heater wires or antenna.

Be careful not to scratch or damage the heater wires or antenna.

8-2. Cleaning and protecting the vehicle interior

536

Perform cleaning in a manner appropriate to each component and its material.

Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth
dampened with lukewarm water.

If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral
detergent diluted to approximately 1%.

Wring out any excess water from the cloth and thoroughly wipe off remaining traces of
detergent and water.

INFORMATION

Shampooing the carpets

Excellent results can be obtained by keeping the carpet as dry as possible. When
cleaning, use a commercially available foaming-type cleaner.
Use a sponge or brush to apply the foam and rub it in overlapping circles. Do not use
water. Wipe the surface to remove the cleaner and dirt and let it dry.

Handling the seat belts

Clean with mild soap and lukewarm water using a cloth or sponge. Also check the
belts periodically for excessive wear, fraying or cuts.

8-2. Cleaning and protecting the vehicle interior

537

8

Maintenance and car

e

Cleaning the areas with satin-finish metal accents

Remove dirt using a water-dampened soft cloth or synthetic chamois.

Wipe the surface with a dry, soft cloth to remove any remaining moisture.

INFORMATION

Cleaning the areas with satin-finish metal accents

The metal areas use a layer of real metal for the surface. It is necessary to clean them
regularly. If dirty areas are left uncleaned for long periods of time, they may be difficult
to clean.

8-2. Cleaning and protecting the vehicle interior

538

Cleaning the leather areas

NOTICE

Observe the following precautions to avoid damage to and deterioration of leather
surfaces:

Remove any dust or dirt from leather surfaces immediately.

Do not expose the vehicle to direct sunlight for extended periods of time.
Park the vehicle in the shade, especially during summer.

Do not place items made of vinyl, plastic, or containing wax on the upholstery, as they
may stick to the leather surface if the vehicle interior heats up significantly.

Remove dirt and dust using a vacuum cleaner.

Wipe off any excess dirt and dust with a soft cloth dampened with diluted
detergent.

Use a diluted water solution of approximately 5% neutral wool detergent.

Wring out any excess water from the cloth and thoroughly wipe off all remaining
traces of detergent.

Wipe the surface with a dry, soft cloth to remove any remaining moisture. Allow
the leather to dry in a shaded and ventilated area.

INFORMATION

Caring for leather areas

Lexus recommends cleaning the interior of the vehicle at least twice a year to maintain
the quality of the vehicle’s interior.

8-2. Cleaning and protecting the vehicle interior

539

8

Maintenance and car

e

Cleaning the synthetic leather areas

Remove dirt and dust using a vacuum cleaner.

Wipe it off with a soft cloth dampened with neutral detergent diluted to approxi-
mately 1%.

Wring out any excess water from the cloth and thoroughly wipe off remaining
traces of detergent and water.

8-2. Cleaning and protecting the vehicle interior

540

Cleaning the air intake vent and filter

INFORMATION

Scheduled maintenance of the air intake vent is necessary when

In some situations such as when the vehicle is used frequently or in heavy traffic or
dusty areas, the air intake vent may need to be cleaned more regularly. For details, refer
to the "Warranty and Service Guide", "Owner’s Manual Supplement" or "Scheduled
Maintenance".

Cleaning the air intake vent

Check the following regarding cleaning of the air intake vent.

Dust in the air intake vent may interfere with the cooling of the hybrid battery (traction
battery). If charging/discharging of the hybrid battery (traction battery) becomes
limited, the distance that the vehicle can be driven using the electric motor (traction
motor) may be reduced and the fuel economy may be reduced. Inspect and clean the
air intake vent periodically.

Improper handling of the air intake vent cover and filter may result in damage to them.
If you have any concerns about cleaning the filter, contact your Lexus dealer.

Cleaning the air intake vent and filter

WARNING

When cleaning the air intake vent, observe the following:

Do not use water or other liquids to clean the air intake vent. If water is applied to the
hybrid battery (traction battery) or other components, a malfunction or fire may occur.

When removing air intake vent cover, be careful not to touch the service plug grip
near the air intake vent.

Before cleaning the air intake vent, make sure to turn the power switch off to stop the
hybrid system.

NOTICE

To prevent malfunction of the hybrid battery (traction battery) or vehicle, make sure to
observe the following precautions.

When cleaning the air intake vent, make sure to only use a vacuum to suck out dust
and clogs.
If a compressed air blow gun, etc. is used to blow out dust and clogs, the dust or clogs
may be pushed into the air intake vent, which may affect the performance of the hybrid
battery (traction battery) and cause a malfunction.

8-2. Cleaning and protecting the vehicle interior

541

8

Maintenance and car

e

NOTICE

Do not allow liquid or foreign matter to enter the air intake vent when the cover is
removed.

Carefully handle the removed filter so that it will not be damaged.
If the filter is damaged, have it replaced with a new filter by your Lexus dealer.

Make sure to reinstall the filter and cover to their original positions after cleaning.

Do not install anything to the air intake vent other than the exclusive filter for this
vehicle or use the vehicle without the filter installed.

1

Remove the dust from the vent and filter with
a vacuum cleaner.

Make sure to only use a vacuum to suck out dust
and clogs. Attempting to blow out dust and clogs
using an airgun, etc. may push it into the air intake
vent.

If dust and clogs cannot be completely removed with the air intake vent cover
installed, remove the cover and clean the filter.

2

Turn the power switch off.

3

Using a phillips-head screwdriver, remove the
clip.

8-2. Cleaning and protecting the vehicle interior

542

4

Pull the cover as shown in the illustration to
disengage the 8 claws, starting from the claw
in the upper right corner and pull the cover
toward the front of the vehicle to remove it.

5

Disengage the 4 center claws from the filter.

6

Disengage the claws in the order of and

to remove the filter from the cover.

7

Remove the dust and clogs from the filter
using a vacuum cleaner, etc.

Make sure to also remove the dust and clogs from
the inner side of the air intake vent cover.

8

Engage the claws in the order of and .

8-2. Cleaning and protecting the vehicle interior

543

8

Maintenance and car

e

9

Engage the 4 claws of the air intake vent
cover to install the filter.

Make sure that the filter is not crooked or de-
formed when installing it.

10

Insert the tab of the cover as shown in the
illustration and push the cover to engage the
8 claws.

11

Using a phillips-head screwdriver, install the
clip.

INFORMATION

After cleaning the air intake vent, start the hybrid system and check that the warning
message is no longer shown. It may take approximately 20 minutes after the hybrid
system is started until the warning message disappears. If the warning message does
not disappear, have the vehicle inspected by your Lexus dealer.

8-2. Cleaning and protecting the vehicle interior

544

Была ли эта страница вам полезна?
Да!Нет
1 посетитель считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности