LEXUS CT200H (2017 year). Instruction — part 5
75
1
For safety
NOTICE
■
Hybrid battery air vent
●
Do not put foreign objects near the air vent. The hybrid battery (traction battery) may
overheat and be damaged.
●
Clean the air vent regularly to prevent the hybrid battery (traction battery) from over-
heating.
●
Do not wet or allow foreign substances to enter the air vent as this may cause a short
circuit and damage the hybrid battery (traction battery).
●
Do not carry large amounts of water such as water cooler bottles in the vehicle. If
water spills onto the hybrid battery (traction battery), the battery may be damaged.
Have the vehicle inspected by your Lexus dealer.
76
Immobilizer system
The indicator light flashes after the
power switch has been turned off to
indicate that the system is operating.
The indicator light stops flashing after
the power switch has been turned to
ACCESSORY or ON mode to indi-
cate that the system has been canceled.
■
System maintenance
The vehicle has a maintenance-free type immobilizer system.
■
Conditions that may cause the system to malfunction
●
If the grip portion of the key is in contact with a metallic object
●
If the key is in close proximity to or touching a key registered to the security system (key
with a built-in transponder chip) of another vehicle
The vehicle’s keys have built-in transponder chips that prevent the hybrid sys-
tem from starting if a key has not been previously registered in the vehicle’s
on-board computer.
Never leave the keys inside the vehicle when you leave the vehicle.
This system is designed to help prevent vehicle theft but does not guarantee
absolute security against all vehicle thefts.
77
1
For safety
■
Certification for the immobilizer system
For vehicles sold in the U.S.A., Hawaii, Guam, Puerto Rico and NATO Germany
For vehicles sold in Canada
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of
the system cannot be guaranteed.
78
Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
The alarm is triggered in the following situations when the alarm is set:
●
A locked door is unlocked or opened in any way other than using the entry
function, wireless remote control or mechanical key. (The doors will lock again
automatically.)
●
The hood is opened.
Close the doors and hood, and lock all
the doors. The system will be set auto-
matically after 30 seconds.
The indicator light changes from being
on to flashing when the system is set.
Do one of the following to deactivate or stop the alarms:
●
Unlock the doors.
●
Turn the power switch to ACCESSORY or ON mode, or start the hybrid sys-
tem. (The alarm will be deactivated or stopped after a few seconds.)
■
System maintenance
The vehicle has a maintenance-free type alarm system.
■
Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of the follow-
ing:
●
Nobody is in the vehicle.
●
The windows and moon roof (if equipped) are closed before the alarm is set.
●
No valuables or other personal items are left in the vehicle.
The alarm
Setting the alarm system
Deactivating or stopping the alarm
79
1
For safety
■
Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
■
Alarm-operated door lock
In the following cases, depending on the situation, the door may automatically lock to
prevent improper entry into the vehicle:
●
When a person remaining in the vehicle unlocks the door and the alarm is activated.
●
While the alarm is activated, a person remaining in the vehicle unlocks the door.
●
When recharging or replacing the 12-volt battery.
●
A person inside the vehicle opens a door or
hood.
●
The 12-volt battery is recharged or replaced
when the vehicle is locked. (
P. 570)
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of
the system cannot be guaranteed.
80
Theft prevention labels (for U.S.A.)
These labels are attached to the vehicle
to reduce vehicle theft by facilitating
the tracing and recovery of parts from
stolen vehicles. Do not remove under
penalty of law.
81
Instrument cluster
2
2.
Instrument cluster
Warning lights and
indicators. . . . . . . . . ...82
Gauges and meters. . . . . .86
Multi-information display . . ..90
Energy monitor/
consumption screen . . . . .93
82
Warning lights and indicators
The units used on the meter and some indicators may differ depending on the
target region.
The warning lights and indicators on the instrument cluster and center panel
inform the driver of the status of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays all warning
lights and indicators illuminated.
83
2
Instrument cl
Warning lights inform the driver of malfunctions in any of the vehicle’s systems.
Warning lights
*
1
(U.S.A.)
Brake system warning light
(
*
1
(U.S.A.)
ABS warning light
(
*
1
(Canada)
Brake system warning light
(
*
1
(Canada)
ABS warning light
(
*
1
Brake system warning light
(
*
1
Electric power steering
system warning light
(
*
1
Charging system warning
light (
*
1, 2
(if equipped)
“PCS” warning light
(
*
1
Low engine oil pressure
warning light (
*
1
Slip indicator light
(
*
1
(U.S.A.)
Malfunction indicator lamp
(
*
1
(if equipped)
Automatic headlight
leveling system warning
light (
P. 536)
*
1
(Canada)
Malfunction indicator lamp
(
*
1
High coolant temperature
warning light (
Low fuel level warning light
(
Open door warning light
(
Seat belt reminder light
(
*
1
Master warning light
(
*
1
SRS warning light
(
*
1
Tire pressure warning light
(
84
*
1
: These lights turn on when the power switch is turned to ON mode to indicate that a
system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunction in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
*
2
: The light flashes to indicate a malfunction.
The indicators inform the driver of the operating state of the vehicle’s various sys-
tems.
Indicators
Turn signal indicator
(
“ECO MODE” indicator
(
(U.S.A.)
Headlight indicator
(
“SPORT MODE” indicator
(
(Canada)
Tail light indicator
(
Cruise control indicator
(
Headlight high beam
indicator (
(if equipped)
Radar cruise control
indicator (
Fog light indicator
(
(if equipped)
Intuitive parking assist
indicator (
“READY” indicator
(
*
1, 2
Slip indicator light
(
EV indicator (
*
1
“TRAC OFF” indicator
(
EV drive mode indicator
(
*
1, 3
(if equipped)
“PCS” warning light
(
Shift position indicators
(
*
1, 4
“AIR BAG ON/
OFF” indicator
(
85
2
Instrument cl
*
1
: These lights turn on when the power switch is turned to the ON mode to indicate that
a system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunction in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
*
2
: The light flashes to indicate that the system is operating.
*
3
: The light comes on when the system is turned off. The light flashes faster than usual to
indicate that the system is operating.
*
4
: This light illuminates on the center panel.
WARNING
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when
you start the hybrid system, this could mean that these systems are not available to help
protect you in an accident, which could result in death or serious injury. Have the vehi-
cle inspected by your Lexus dealer immediately if this occurs.
86
Gauges and meters
The units used on the meters may differ depending on the target region.
Hybrid System Indicator
Displays hybrid system output or regeneration level
Changes to the tachometer depending on the drive mode or setting on the display.
(
Tachometer
Displays the engine speed in revolutions per minute
Changes to Hybrid System Indicator depending on the drive mode or setting on the
display. (
Shift position indicators
Speedometer
Displays the vehicle speed
ECO lamp and SPORT lamp
Changes colors according to driving mode (
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of driving-related data (
Displays warning messages in case of a malfunction (
Outside temperature
The temperature range that can be displayed is from -40
F (-40C) to 122F
(50
C)
1
2
3
4
5
6
7
8
87
2
Instrument cl
Odometer and trip meter display
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different dis-
tances independently.
Odometer/trip meter display change button
P. 87
Switches between odometer and trip
meter displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel lights can be adjusted by turning the dial.
Brighter
Darker
When the headlight switch is turned to
ON, the brightness will be reduced
slightly unless the control dial is turned
fully up.
When the dial is turned fully down, the
cup holder light and the footwell lights
will turn off. (
P. 431)
Changing the display
9
10
Instrument panel light control
1
2
88
■
The meters and display illuminate when
The power switch is in ON mode.
■
Hybrid System Indicator
●
Hybrid System Indicator is displayed when the driving mode is in other than the sport
mode.
●
By keeping the indicator needle within Eco area, more Eco-friendly driving can be
achieved.
●
Charge area indicates regeneration
*
status. Regenerated energy will be used to
charge the hybrid battery (traction battery).
*
: When used in this manual, “regeneration” refers to the conversion of energy created
by the movement of the vehicle into electrical energy.
■
Tachometer
The tachometer is displayed when the driving mode is in the sport mode.
■
ECO lamp and SPORT lamp
●
When sport mode is selected, the SPORT lamp (red) will illuminate.
●
When all of the following conditions are satisfied and the Eco-friendly driving, the ECO
lamp (blue) will illuminate:
• Driving with the shift position in D
• Either normal mode or Eco drive mode is selected, and EV drive mode is not in use
(
• The vehicle speed is approximately 80 mph (130 km/h) or below.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
Charge area
Shows that energy is being recovered via the
regenerative brake.
1
2
3
4
89
2
Instrument cl
■
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel
efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even when vehicle
operation and driving conditions are the same.
■
Outside temperature display
●
In the following situations, the correct outside temperature may not be displayed, or the
display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system may be malfunctioning.
Take your vehicle to your Lexus dealer.
■
Customization
Settings (e.g. on/off operation of the ECO lamp) can be changed.
(Customizable features:
NOTICE
■
To prevent damage to the engine and its components
●
Do not let the indicator needle of the tachometer enter the red zone, which indicates
the maximum engine speed.
●
The engine may be overheating if the high coolant temperature warning light comes
on or flashes. In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (
90
Multi-information display
The multi-information display presents the driver with a variety of vehicle data.
●
Energy monitor
Displays the status of the hybrid system.
(
●
Drive information
Displays driving range, fuel consump-
tion and other cruising related informa-
tion. (
P. 90)
●
Setting
Changes instrument cluster display set-
tings (
●
Intuitive parking assist display (if equipped)
Automatically displayed when the system is used (
●
Dynamic radar cruise control display (if equipped)
Automatically displayed when the system is used (
●
Warning messages
Automatically displayed when a malfunction occurs in one of the vehicle’s systems
(
Items displayed can be switched by
pressing the “DISP” switch.
■
Energy monitor
P. 93
■
Current fuel consumption/Average fuel consumption after refueling
Displays the instant fuel consumption and average fuel consumption after
refueling.
Use the displayed average fuel consumption as a reference.
Display contents
Drive information
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст