Lexus NX (2022 year). Manual in english — page 1
Using the dedicated floor mats
Using the dedicated floor mats correctly
Use only floor mats designed specifically for vehicles of the same model and model
year as your vehicle. Fix them securely in place onto the carpet.
WARNING
●
When installing a driver's side floor mat, do not use floor mats designed for other
models or different model year vehicles, even if they are Lexus Genuine floor mats.
●
Only use floor mats designed for the driver’s seat.
●
Do not use two or more floor mats on top of each other.
●
Do not place the floor mat bottomside up or upside-down.
Securing the floor mats
WARNING
Check the following before driving.
●
Check that the floor mat is securely fixed in the correct place with all the provided
retaining hooks (clips). Be especially careful to perform this check after cleaning the
floor.
●
With the engine stopped and the shift position in P, fully depress each pedal to the floor
to make sure it does not interfere with the floor mat.
1
Insert the retaining hooks (clips) into the
floor mat eyelets.
1-1. Using the dedicated floor mats
22
WARNING
Always install the floor mat securely using the retaining hooks (clips) provided.
2
Turn the upper knob of each retaining hook
(clip) to secure the floor mats in place.
Always align the
△
marks
.
The shape of the retaining hooks (clips) may differ
from that shown in the illustration.
1-1. Using the dedicated floor mats
23
1
Befor
e driving
Preparations for safe driving with children in the vehicle
Riding with children
If a child which is not large enough to correctly wear a seat belt intended for adults
is to ride in the vehicle, use a child restraint system. Child restraint systems are
designed to keep children safe.
To ensure safety, observe the following when children are in the vehicle.
●
Make sure that children always wear a seat belt.
If a child is not wearing a seat belt, in a collision, they may collide with a window,
other passenger, or the interior of the vehicle. Also, if a child is riding on the
lap of another passenger, in a collision, they may collide with a window, other
passenger, or the interior of the vehicle.
●
Seat children in the rear seats.
It is recommended that children sit in the rear seats to avoid accidental contact
with the driver's controls.
●
Do not allow children to operate equipment such as the doors, windows, etc.
Do not let children operate equipment such as the doors, power windows, seats,
etc. as a part of their body may become pinched.
To prevent children from opening and closing the doors and power windows, use
the child-protector locks and window lock switch.
●
Never use a rear-facing child restraint system
on the front passenger seat when the airbag
manual on-off switch is on.
The force of the rapid inflation of the front
passenger airbag can cause death or serious
injury to children in the event of an accident.
●
There is a label(s) on the passenger side sun visor, indicating it is forbidden to
attach a rear-facing child restraint system to the front passenger seat.
1-2. Preparations for safe driving with children in the vehicle
24
WARNING
●
Never leave children unattended in the vehicle, and never allow children to have or
use the key.
Children may be able to start the vehicle or shift the vehicle into neutral.
●
Do not leave children unattended in the vehicle.
Children may accidentally cause the vehicle to move, leading to an accident, or start a
fire.
●
Do not leave people or animals in the vehicle.
The temperature inside the vehicle can become extremely high during the daytime,
possibly leading to heat stroke or death.
●
Do not allow children to ride on the lap of a passenger.
If a child is riding on the lap of another passenger, in a collision, they may collide with a
window, another passenger, or the interior of the vehicle. Make sure that children wear
a seat belt or use a child restraint system.
●
Use a child restraint system for small children.
If a child which is not large enough to correctly wear a seat belt is to ride in the vehicle,
use a child restraint system.
●
Use child restraint systems correctly.
Child restraint systems are designed to protect children in a collision or sudden stop.
Make sure to securely install child restraint systems and use them correctly.
●
Replace child restraint systems which have been involved in a collision.
If the vehicle has been involved in a collision, it is possible that an installed child
restraint system has been damaged and will not be able to deliver the same level of
impact absorption performance, even if the outside of it looks normal.
●
When a child restraint system is not in use, secure it so that it does not interfere with
driving.
When removing a child restraint system, store it outside of the vehicle or securely in
the luggage compartment.
Seating positions for children
It is recommended that children sit in the rear seats to avoid accidental contact
with the driver’s controls. In the event of an accident, the force of deployment of the
SRS front passenger airbag can cause death or serious injury to a child seated on
the front passenger’s seat. Do not allow a child to ride on the front passenger’s seat
unless it is unavoidable.
1-2. Preparations for safe driving with children in the vehicle
25
1
Befor
e driving
WARNING
●
When installing a child restraint system to the front passenger’s seat is unavoidable,
move the seat as far back as possible, and install the child restraint system so that it
faces forward. If the child restraint system is not installed correctly, in the event of an
accident, the force of deployment of the SRS front passenger airbag can cause death
or serious injury.
●
Do not allow children to lean against the doors, roof side rails, or pillars. In the event
of an accident, the force of deployment of an SRS airbag can cause death or serious
injury to a child.
●
When adjusting the driver’s seat, if it contacts a child or child restraint system, install
the child restraint system to the rear seat behind the front passenger’s seat.
●
Adjust the front passenger seat so that it does not interfere with the child or child
restraint system.
●
If a child which is over 100 cm tall is to ride in the vehicle, use a junior seat. When using
a junior seat, make sure that the seat belt is worn correctly.
Preventing the rear doors from being opened from the inside of the
vehicle (child-protector lock)
The door cannot be opened from inside the vehicle when the lock is set.
1
Unlock
2
Lock
These locks can be set to prevent children from
opening the rear doors. Push down on each
rear door switch to lock both rear doors.
INFORMATION
■
Door opening method when using a child-protector lock
Unlock the door and pull the exterior door handle to open the door. If it is necessary to
open the door from inside the vehicle, open the rear door window and pull the exterior
door handle.
1-2. Preparations for safe driving with children in the vehicle
26
Selecting an appropriate child restraint system
Precautions for selecting a child restraint system
To ensure safety, observe the following when using a child restraint system.
●
Make sure to observe the precautions regarding child restraint systems.
●
Choose a child restraint system appropriate to the age and size of the child.
●
Check the compatibility of the child restraint system with each seating position.
Depending on the child restraint system, it may not be able to be installed.
●
For details about use of a child restraint system, check the user’s manual of the
child restraint system.
WARNING
●
Check that the seat belt for the seat next to a child restraint system can be worn
properly. Depending on the type of child restraint system, the seat belt may not be able
to be worn properly. In this case, use another seat.
●
When adjusting the driver’s seat, if it contacts a child or child restraint system, install
the child restraint system to the rear seat behind the front passenger’s seat.
●
Adjust the front passenger seat so that it does not interfere with the child or child
restraint system.
●
When installing a child restraint system with support base, if the child restraint system
contacts a seatback when installing it to the support base, adjust the seatback rear-
ward until they do not contact.
●
If the seat belt shoulder anchor is in front of the
seat belt guide of a child restraint system, move
the seat forward.
●
When installing a junior seat, if the child in your child restraint system is in a very
upright position, adjust the seatback angle to the most comfortable position.
Selecting a child restraint system
Use a child restraint system that conforms to UN (ECE) R44 or UN (ECE) R129.
UN (ECE) R44 and UN (ECE) R129 are U.N. regulations for child restraint
systems.
1-2. Preparations for safe driving with children in the vehicle
27
1
Befor
e driving
■
Example
"UN
(
ECE
)
R44"
"UN
(
ECE
)
R129"
NOTICE
●
The displayed mark may differ depending on the product.
●
If the category of a child restraint system is unclear, refer to the user's manual of the
child restraint system or check with the manufacturer.
■
Recommended child restraint systems information
Mass group
Recommended child
restraint system
Fixation
fixed with a seat belt
fixed with lower an-
chorages
Group 0 or 0+
Up to 10 kg or 13 kg
(Up to 22 lb. or 28
lb.)
LEXUS
G0+, BABY SAFE
PLUS
Yes
Not
Applicable
Group I
9 to 18 kg (20 to 39
lb.)
LEXUS
DUO PLUS
Yes
Yes
1-2. Preparations for safe driving with children in the vehicle
28
Mass group
Recommended child
restraint system
Fixation
fixed with a seat belt
fixed with lower an-
chorages
Group II and III
15 to 25 kg and 22
to 36 kg (34 to 55
lb. and 48 to 79 lb.)
LEXUS
Yes
Yes
LEXUS
MAXI PLUS
Yes
Yes
(1)
Adjust the restraint system headrest, so that it does not interfere with the vehicle
interior.
(2)
Be sure to attach the seat belt through the SecureGuard.
The child restraint systems mentioned in the table may not be available outside the
EU countries and United Kingdom.
●
When using the child restraint system with Se-
cureGuard, be sure to guide the lap belt into
SecureGuard as shown in the illustration.
INFORMATION
Lexus recommends the use of a Lexus genuine child restraint system, as they meet strict
quality standards.
Lexus genuine child restraint systems are made specifically for Lexus vehicles. For details,
refer to the Lexus web site or contact any authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
1-2. Preparations for safe driving with children in the vehicle
29
1
Befor
e driving
Child restraint system compatibility with each seating position
Left-hand drive vehicles:
Right-hand drive vehicles:
Seating position
Seat position
number
Airbag manual on-off switch
ON
OFF
Seating posi-
tion suitable
for universal
belted
(Yes/No)
Yes
Forward-fac-
ing only
Yes
Yes
Yes
Yes
i-Size seating
position
(Yes/No)
No
No
Yes
No
Yes
Seating posi-
tion suitable
for lateral fix-
ture
(L1/L2/No)
No
No
No
No
No
1-2. Preparations for safe driving with children in the vehicle
30
Left-hand drive vehicles:
Right-hand drive vehicles:
Seating position
Seat position
number
Airbag manual on-off switch
ON
OFF
Suitable
rearward
facing fixture
(R1/R2X/R2
/R3/No)
No
No
R1, R2X, R2,
R3
No
R1, R2X, R2,
R3
Suitable for-
ward facing
fixture
(F2X/F2/F3
/No)
No
No
F2X, F2, F3
No
F2X, F2, F3
Suitable jun-
ior seat fix-
ture
(B2/B3/No)
No
No
B2, B3
No
B2, B3
(1)
Move the front seat fully rearward. If the passenger seat height can be adjusted, move
it to the upper most position.
1-2. Preparations for safe driving with children in the vehicle
31
1
Befor
e driving
(2)
Raise the seatback to be as upright as possible and reduce the gap between the child
restraint system and seatback.
(3)
If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint. Otherwise, put the head restraint in the
upper most position.
(4)
All universal categories (group 0, 0+, I, II and III).
●
Lexus suggests the users to use
and
seating positions.
Activation of front passenger airbag.
Never use a rear-facing child restraint system on the front passen-
ger seat when the airbag manual on-off switch is on.
Deactivation of front passenger airbag.
Suitable for "universal" category child restraint system fixed with
the seat belt.
Suitable for forward-facing "universal" category child restraints
system fixed with the seat belt.
Suitable for recommended child restraint systems given on recom-
mended child restraint systems information.
Suitable for i-Size and ISOFIX child restraint system.
Includes a top tether anchorage point.
1-2. Preparations for safe driving with children in the vehicle
32
In the following situations, refer to the "vehicle compatibility list" from the manufac-
turer of the child restraint system, or contact your Lexus dealer or the retailer of the
child restraint system.
●
When the child restraint system is not a "universal" category child restraint
system
●
When it is unknown if the child restraint system is a "universal" category child
restraint system or not
Installation fixture list
ISOFIX child restraint systems are divided into different "fixture" types. Select a
fixture type according to the position where the child restraint system is to be
installed. Refer to the following table for the "fixture" types.
●
To check the "fixture" type of a child restraint system, check the user's manual
included with it.
●
If the child restraint system has no "fixture" type (or if the information is not in the
table), refer to the "vehicle compatibility list" from the manufacturer of the child
restraint system or contact the retailer of the child restraint system.
Mass group
Child weight
Size class
Fixture
Description
0
Up to 10 kg (22
lb.)
E
R1
Rearward-facing
infant seat
F
L1
Left lateral-facing
infant seat (Carry-
cot)
G
L2
Right lateral-facing
infant seat (Carry-
cot)
0
+
Up to 13 kg (28
lb.)
C
R3
Full-size, rearward-
facing child re-
straint systems
D
R2
Reduced-size,
rearward-facing
child restraint sys-
tems
—
R2X
Reduced-size,
rearward-facing
child restraint sys-
tems
1-2. Preparations for safe driving with children in the vehicle
33
1
Befor
e driving
Mass group
Child weight
Size class
Fixture
Description
0
+
Up to 13 kg (28
lb.)
E
R1
Rearward-facing
infant seat
I
9 to 18 kg (20 to
39 lb.)
A
F3
Full-height, for-
ward-facing child
restraint systems
B
F2
Reduced-height
forward-facing
child restraint sys-
tems
B1
F2X
Reduced-height
forward-facing
child restraint sys-
tems
C
R3
Full-size, rearward-
facing child re-
straint systems
D
R2
Reduced-size,
rearward-facing
child restraint sys-
tems
Ⅱ
15 to 25 kg (34
to 55 lb.)
—
B2, B3
Junior seat
Ⅲ
22 to 36 kg (48
to 79 lb.)
1-2. Preparations for safe driving with children in the vehicle
34
Installing a child restraint system
Lexus recommends that child restraint systems be installed to a rear seat. For
safety, when using a child restraint system, make sure to install it to a rear seat.
If installing the child restraint system to the front passenger seat is unavoidable,
refer to
Installing a child restraint system to the front passenger's seat(
.
Use a child restraint system appropriate for the size of the child. Never use an
incorrectly sized child restraint system.
NOTICE
Before installing a child restraint system, make sure to read the user's manual included
with it.
Installing an ISOFIX/i-Size compatible child restraint system
This vehicle is equipped with ISOFIX lower anchorages. Therefore, ISOFIX com-
patible child restraint systems can quickly and easily be installed.
Installation using ISOFIX lower anchorages
Install the child restraint system according to the user's manual included with it.
In the following situations, refer to the "vehicle compatibility list" from the manufac-
turer of the child restraint system, or contact your Lexus dealer or the retailer of the
child restraint system.
●
When the child restraint system is not a "universal" category child restraint
system
●
When it is unknown if the child restraint system is a "universal" category child
restraint system or not
WARNING
Observe the following when installing a child restraint system.
●
After installing a child restraint system, do not adjust the seat.
●
When using the lower anchorages, make sure that the area around the anchors is free
of objects and that the seat belt will not be caught behind the child restraint system.
●
Securely install the child restraint system according to the user's manual of the child
restraint system.
1-2. Preparations for safe driving with children in the vehicle
35
1
Befor
e driving
If a head restraint interferes with a child restraint system
When installing a child restraint system, if a head restraint interferes with the child
restraint system, remove the head restraint or adjust its position.
●
Remove the head restraint.
If a head restraint cannot be removed, move it to the uppermost position.
Installing a child restraint system with ISOFIX lower anchorages
Engage the connectors of an ISOFIX compati-
ble child restraint system to the ISOFIX lower
anchorages of the vehicle.
Install the child restraint system according to the
user's manual included with it.
1
Check the positions of the lower anchorages.
2
Install the child restraint system to the seat.
3
Engage the connectors of the child restraint system to the lower anchorages.
4
Install the child restraint system according to the user's manual included with it.
5
Shake the installed child restraint system in all directions.
Make sure that the child restraint system is securely installed.
Using a top tether anchorage
WARNING
Observe the following when installing a child restraint system.
●
Make sure that the top strap is not twisted.
●
Make sure that the top strap is engaged to the top tether anchorage.
●
Make sure that the top strap is securely attached.
●
After installing a child restraint system, do not adjust the seat.
●
After installing a child restraint system, do not adjust the head restraint.
●
Securely install the child restraint system according to the user’s manual of the child
restraint system.
1-2. Preparations for safe driving with children in the vehicle
36
Attach the top strap of the child restraint system to the top tether anchorage of the
vehicle.
Install the child restraint system according to the user’s manual included with it.
A
Top tether anchorages
B
Top strap
C
Hook
1
Remove the head restraint.
If the head restraint cannot be removed, move it to the uppermost position.
Route the top strap under the head restraint.
2
Engage the hook to the top tether anchorage.
3
Tighten the top strap to secure the hook.
Make sure that the top strap is tight and the hook is securely engaged.
Installing a child restraint system with a seat belt
Install the child restraint system according to the user's manual included with it.
In the following situations, refer to the "vehicle compatibility list" from the manufac-
turer of the child restraint system, or contact your Lexus dealer or the retailer of the
child restraint system.
●
When the child restraint system is not a "universal" category child restraint
system
●
When it is unknown if the child restraint system is a "universal" category child
restraint system or not
WARNING
Observe the following when installing a child restraint system.
●
After installing a child restraint system, do not adjust the seat.
1-2. Preparations for safe driving with children in the vehicle
37
1
Befor
e driving
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст