Lexus NX (2022 year). Manual in english — page 6

Using the seat belts

●

Extend the shoulder belt so that it comes fully over the shoulder, but does not
come into contact with the neck or slide off the shoulder.

●

Position the lap belt as low as possible over the hips.

●

Adjust the position of the seatback. Sit up straight and well back in the seat.

●

Do not twist the seat belt.

WARNING

Observe the following precautions to reduce the risk of injury in the event of sudden
braking, sudden swerving or an accident. Failing to do so may cause death or serious
injury.

●

Ensure that all passengers wear a seat belt.

●

Always wear a seat belt properly.

●

Each seat belt should be used by one person only.
Do not use a seat belt for more than one person at once, including children.

●

Lexus recommends that children be seated in the rear seat and always use a seat belt
and/or an appropriate child restraint system.

●

To achieve a proper seating position, do not recline the seat more than necessary. The
seat belt is most effective when the occupants are sitting up straight and well back in
the seats.

●

Do not wear the shoulder belt under your arm.

●

Always wear your seat belt low and snug across your hips.

1-4. Obtaining the correct driving posture

103

1

Befor

e driving

WARNING

●

Women who are pregnant should consult their
doctor for any precautions for wearing the seat
belt correctly.
Position the lap belt as low as possible over the
hips in the same manner as other occupants,
extending the shoulder belt completely over the
shoulder and avoiding belt contact with the round-
ing of the abdominal area.
If the seat belt is not worn properly, not only the
pregnant woman, but also the fetus could suffer
death or serious injury as a result of sudden brak-
ing or a collision.

●

Persons with a medical condition should consult their doctor for any precautions for
wearing the seat belt correctly.

●

Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do
not use a damaged seat belt until it is replaced. Damaged seat belts cannot protect an
occupant from death or serious injury.

●

Replace the seat assembly, including the belts, if your vehicle has been involved in a
serious accident, even if there’s no obvious damage.

●

Do not attempt to install, remove, modify, disassemble or dispose of the seat belts.
Have any necessary repairs carried out by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer. Inappropriate handling may lead to
incorrect operation.

●

Do not allow children to play with the seat belt.
If the seat belt becomes twisted around a child's neck, it may lead to choking or other
serious injuries that could result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used to cut the
belt.

INFORMATION

■

Child seat belt usage

The seat belts of your vehicle were principally designed for persons of adult size.

●

Use a child restraint system appropriate for the child, until the child becomes large
enough to properly wear the vehicle’s seat belt.

1-4. Obtaining the correct driving posture

104

●

When the child becomes large enough to properly wear the vehicle’s seat belt, follow
the instructions regarding seat belt usage.

■

Seat belt regulations

If seat belt regulations exist in the country where you reside, please contact any author-
ized Lexus retailer or Lexus authorized repairer, or any reliable repairer for seat belt
replacement or installation.

Fastening and releasing the seat belts

1

To fasten the seat belt, push the plate into
the buckle until a click sound is heard.

2

To release the seat belt, press the release
button .

INFORMATION

■

Emergency locking retractor (ELR)

The retractor will lock the belt during a sudden stop or on impact. It may also lock if you
lean forward too quickly. When the seat belt locks, pull the belt strongly and then release
the belt, then a slow and easy pulling will allow the belt to extend.

WARNING

●

Do not damage the seat belts by allowing the belt, plate, or buckle to be jammed in the
door.

●

Ensure that the belt and plate are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.

1-4. Obtaining the correct driving posture

105

1

Befor

e driving

Adjusting the height of the front seat belts

1

Push the seat belt shoulder anchor down
while pressing the release button .

2

Push the seat belt shoulder anchor up while
pressing the release button .

Move the height adjuster up and down as need-
ed until you hear a click.

WARNING

■

Adjustable shoulder anchor

Always make sure the shoulder belt is positioned across the center of your shoulder. The
belt should be kept away from your neck, but not falling off your shoulder. Failure to do so
could reduce the amount of protection in an accident and cause death or serious injuries
in the event of a sudden stop, sudden swerve or accident.

1-4. Obtaining the correct driving posture

106

Adjusting the position of the steering wheel and mirrors

Adjusting the position of the steering wheel horizontally/vertically
(Manual type)

WARNING

Do not adjust the steering wheel while driving.

1

Hold the steering wheel and push the lever
down.

2

Adjust to the ideal position by moving the
steering wheel horizontally and vertically.

After adjustment, pull the lever up to secure the
steering wheel.

INFORMATION

■

After adjusting the steering wheel

Make sure that the steering wheel is securely locked.
The horn may not sound if the steering wheel is not securely locked.

WARNING

After adjusting the steering wheel, make sure that the steering wheel is securely
locked.
Otherwise, the steering wheel may move suddenly.

1-4. Obtaining the correct driving posture

107

1

Befor

e driving

Adjusting the position of the steering wheel horizontally/vertically
(Power type)

INFORMATION

■

The steering wheel can be adjusted when

The engine switch is in ACC or ON.

*1

WARNING

Do not adjust the steering wheel while driving.

Operating the switch moves the steering wheel
in the following directions:

1

Up

2

Down

3

Toward the driver

4

Away from the driver

INFORMATION

■

Automatic adjustment of the steering position

A desired steering position can be entered to memory and recalled automatically by the
driving position memory system.

■

Power easy access system

The steering wheel and driver’s seat move in accordance with engine switch mode and
the driver’s seat belt condition.

Adjusting the position of the inside rear view mirror

WARNING

Do not adjust the position of the mirror while driving.

Adjust the position of the inside rear view mirror so that the correct driving posture
can be achieved.

*1 :

If the driver’s seat belt is fastened, the steering wheel can be adjusted regardless of

engine switch mode.

1-4. Obtaining the correct driving posture

108

Adjust the inside rear view mirror vertically by
grasping and moving it.

Digital Rear-veiw mirror effort and caution

*

The Digital Rear-view Mirror is a system that uses the camera on the rear of the
vehicle and displays its image on the display of the Digital Rear-view Mirror.
The Digital Rear-view Mirror can be changed between optical mirror mode and
digital mirror mode by operating the lever.
The Digital Rear-view Mirror allows the driver to see the rear view despite obstruc-
tions, such as the head restraints or luggage, ensuring rear visibility. Also, the rear
seats are not displayed and privacy of the passengers is enhanced.

WARNING

Observe the following precautions. Failure to do so may result in death or serious injury.

■

Before using the Digital Rear-view Mirror

●

Make sure to adjust the mirror before driving.

•

Change to optical mirror mode and adjust the position of the Digital Rear-view
Mirror so that the area behind your vehicle can be viewed properly.

•

Change to digital mirror mode and adjust the display settings.

●

As the range of the image displayed by the Digital Rear-view Mirror is different from
that of the optical mirror, make sure to check this difference before driving.

System components of the Digital Rear-view Mirror

A

Camera indicator
Indicates that the camera is operating nor-
mally.

B

Icon display area
Displays icons, adjusting gauge, etc.

C

Select/adjust button

* :

If equipped

1-4. Obtaining the correct driving posture

109

1

Befor

e driving

Press to change the setting of the item you
want to adjust.

D

Menu button
Press to display the icon display area and
select the item you want to adjust.

E

Lever
Operate to change between digital mirror
mode and optical mirror mode.

Related Links

Adjusting the Digital Rear-view Mirror(P. 111)

Changing modes of the Digital Rear-view Mirror

Operate the lever to change between digital mirror mode and optical mirror
mode.

1

Digital mirror mode
Displays an image of the area behind the
vehicle.

[

] will illuminate in this mode.

2

Optical mirror mode
Turns off the display of the Digital Rearview
Mirror allows it to be used as an optical
mirror.

Digital mirror mode operating condition

The engine switch is turned to ON.
When the engine switch is changed from ON to OFF or ACC, the image will
disappear after several seconds.

Precautions about digital mirror mode

If it is difficult to see the displayed image due to light reflected off the Digital
Rear-view Mirror, the camera being dirty or covered with water droplets, dust, etc.,
or if lights of a vehicle behind your vehicle or the displayed image are bothering
you, change to optical mirror mode.
When it is raining, if the image is unclear due to water on the rear window, operate
the rear wiper.

1-4. Obtaining the correct driving posture

110

●

When the back door is open, the Digital Rear-view Mirror image may not
display properly. Before driving, make sure the back door is closed.

●

If the display is difficult to see due to reflected light, close the sunshade.

●

Any of the following conditions may occur when driving in the dark, such as at
night. None of them indicates that a malfunction has occurred.

•

Colors of objects in the displayed image may differ from their actual color.

•

Depending on the height of the lights of the vehicle behind, the area around the
vehicle may appear white and blurry.

•

Automatic image adjustment for brighter surrounding image may cause flickering.
If it is difficult to see the displayed image or flickering bothers you, change to optical
mirror mode.

●

The Digital Rear-view Mirror may become hot while it is in digital mirror mode.
This is not a malfunction.

●

Depending on your physical condition or age, it may take longer than usual to
focus on the displayed image. In this case, change to optical mirror mode.

●

Do not let passengers stare at the displayed image when the vehicle is being
driven, as doing so may cause motion sickness.

■

When the system malfunctions

If the symbol shown in the illustration is displayed
when using the Digital Rear-view Mirror in digital
mirror mode, the system may be malfunctioning.
The symbol will disappear in a few seconds.
Operate the lever, change to optical mirror
mode and have the vehicle inspected by any
authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.

Adjusting the Digital Rear-view Mirror

Settings of the display in the digital mirror mode, on/off operation of the automatic
anti-glare function, etc. can be changed.

1-4. Obtaining the correct driving posture

111

1

Befor

e driving

1

Press the menu button.

The icons will be displayed.

2

Press the menu button repeatedly and select the item you want to adjust.

3

Press [

] or [

]to change the setting.

The icons will disappear if a button is not operated for approximately 5 seconds or
more.

Icons

Settings

Select to adjust the brightness of the dis-
play.

Select to adjust the area displayed up/
down.

Select to adjust the area displayed to the
left/right.

Select to adjust the angle of the displayed
image.

Select to zoom in/out the displayed im-
age.

Select to enable/disable the automatic
anti-glare function.

*2

Responding to the brightness of the
headlights of vehicles behind, the reflect-
ed light is automatically adjusted.
The automatic anti-glare function is en-
abled each time the engine switch is
changed to ON.

*2 :

This is a function for the optical mirror mode, however, the setting can also be changed

while using the digital mirror mode.

1-4. Obtaining the correct driving posture

112

Precautions when adjusting the Digital Rear-view Mirror

■

Display settings (digital mirror mode)

●

The icons will disappear if a button is not operated for approximately 5 seconds
or more.

●

If the displayed image is adjusted, it may appear distorted. This is not a malfunc-
tion.

●

If the brightness of the Digital Rear-view Mirror is set too high, it may cause eye
strain. Adjust the Digital Rear-view Mirror to an appropriate brightness. If your
eyes become tired, change to optical mirror mode.

●

The brightness of the Digital Rear-view Mirror will change automatically accord-
ing to the brightness of the area in front of your vehicle.

■

To prevent the light sensors from malfunctioning

To prevent the light sensors from malfunctioning,
do not touch or cover them.

WARNING

Observe the following precautions. Failure to do so may result in death or serious injury.

■

While driving

●

Do not adjust the position of the Digital Rear-view Mirror or adjust the display settings
while driving.
Stop the vehicle and operate the Digital Rear-view Mirror control switches. Failure
to do so may cause a steering wheel operation error, resulting in an unexpected
accident.

●

Always pay attention to the vehicle’s surroundings.
The size of the vehicles and other objects may look different when in digital mirror
mode and optical mirror mode. When backing up, make sure to directly check the
safety of the area around your vehicle, especially behind the vehicle. Additionally, if a
vehicle approaches from the rear in the dark, such as at night, the surrounding area
may appear dim.

1-4. Obtaining the correct driving posture

113

1

Befor

e driving

Cleaning the Digital Rear-view Mirror

■

Cleaning the mirror surface

If the mirror surface is dirty, the image on the display may be difficult to see. Wipe
the mirror surface gently using a soft dry cloth.

INFORMATION

■

The camera

The camera for the Digital Rear-view Mirror is locat-
ed as shown.

NOTICE

■

To prevent the camera from malfunctioning

●

Observe the following precautions, otherwise the Digital Rear-view Mirror may not
operate properly.

•

Do not strike or hit the camera or subject it to a strong impact, as the camera
installation position and angle may be changed.

•

Do not remove, disassemble or modify the camera.

•

Do not allow an organic solvent, car wax, window cleaner or glass coating to
adhere to the camera. If this happens, wipe it off as soon as possible.

•

When applying colored film (including transparent film) to the rear window glass,
do not apply it to the area in front of the camera. If film is applied to the area in front
of the camera, the image from the camera may not display properly.

●

Do not subject the camera to a strong impact as this could cause a malfunction. If
this happens, have the vehicle inspected by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer as soon as possible.

1-4. Obtaining the correct driving posture

114

NOTICE

●

Do not block the vent holes of the mirror. Other-
wise, the mirror may be hot, leading to a malfunc-
tion or a fire.

If you notice any symptoms about the Digital Rear-view Mirror

If you notice any of the following symptoms, refer to the following table for the likely
cause and the solution.
If the symptom is not resolved by the solution, have the vehicle inspected by any
authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.

Symptom

Likely cause

Solution

The image is
difficult to see.

The mirror surface is dirty.

Wipe the mirror surface gently, using a
soft dry cloth.

Sunlight or headlights are
shining directly into the Digi-
tal Rear-view Mirror.

Change to optical mirror mode. (If the
light is coming through the moon roof
or panoramic moon roof, close the sun-
shade or electronic sunshade.)

1-4. Obtaining the correct driving posture

115

1

Befor

e driving

Symptom

Likely cause

Solution

The image is
difficult to see.

●

The vehicle is in a dark
area.

●

The vehicle is near a TV
tower, broadcasting sta-
tion, electric power plant,
or other location where
strong radio waves or
electrical noise may be
present.

●

The temperature around
the camera is extremely
high/low.

●

The ambient temperature
is extremely low.

●

It is raining or humid.

●

Sunlight or headlights are
shining directly into the
camera lens.

●

The vehicle is under flu-
orescent lights, sodium
lights, mercury lights, etc.

●

Exhaust gas is obstructing
the camera.

Change to optical mirror mode. (Change
back to digital mirror mode when the
conditions have improved.)

Foreign matters such as wa-
ter droplets or dust is on the
camera lens.

Have the vehicle inspected by any au-
thorized Lexus retailer or Lexus author-
ized repairer, or any reliable repairer

The luggage in the luggage
compartment is reflected off
the rear window glass and
obstructing the camera.

Change to optical mirror mode.
Move the luggage to a position where it
does not obstruct the camera or cover it
with a black cloth to reduce the amount it
is reflected off the rear window glass.

The rear window glass is fog-
ged up.

After defogging the rear window using
the rear window defogger, use the digital
mirror mode again.

The outside of the rear win-
dow glass is dirty.

Use the rear window wiper to remove
dirt.

1-4. Obtaining the correct driving posture

116

Symptom

Likely cause

Solution

The image is
difficult to see.

The inside of the rear window
glass is dirty.

Have the vehicle inspected by any au-
thorized Lexus retailer or Lexus author-
ized repairer, or any reliable repairer

The image is
out of align-
ment.

The back door is not fully
closed.

Fully close the back door.

The camera or its surround-
ing area has received a
strong impact.

Change to optical mirror mode and have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized re-
pairer, or any reliable repairer.

The display is
dim and [

]

is displayed.

The system may be malfunc-
tioning.

Change to optical mirror mode and have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized re-
pairer, or any reliable repairer.

[

] goes

off.

[

] is dis-

played.

The Digital Rear-view Mirror
is extremely hot. (The display
will gradually become more
dim. If the temperature con-
tinues to increase, the Digi-
tal Rear-view Mirror will turn
off.)

Reducing the cabin temperature is rec-
ommended to reduce the temperature
of the mirror. ([

] will disappear when

the mirror becomes cool.)

If [

] does not disappear even though

the mirror is cool, have the vehicle in-
spected by any authorized Lexus retailer
or Lexus authorized repairer, or any relia-
ble repairer.

The lever can-
not be operat-
ed properly.

The lever may be malfunc-
tioning.

Change to optical mirror mode and have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized re-
pairer, or any reliable repairer.
To change to optical mirror mode, press
and hold the menu button for approxi-
mately 10 seconds.

Adjusting the angle of the outside rear view mirrors

WARNING

Do not adjust the position of the mirror while driving.

1-4. Obtaining the correct driving posture

117

1

Befor

e driving

1

To select a mirror to adjust, press the switch.

A

Select the left mirror

B

Select the right mirror

2

To adjust the mirror, press the switch.

A

Adjust the mirror surface up

B

Adjust the mirror surface right

C

Adjust the mirror surface down

D

Adjust the mirror surface left

INFORMATION

■

Mirror angle can be adjusted when

The engine switch is in ACC or ON.

■

Automatic adjustment of the mirror angle (vehicles with driving position mem-
ory)

A desired mirror face angle can be entered to memory and recalled automatically by
the driving position memory.

■

Linked mirror function when reversing (vehicles with driving position memory)

When the mirror select switch is in the “L” or “R” position, the outside rear view
mirrors will automatically angle downwards when the vehicle is reversing in order to
give a better view of the ground.
To disable this function, move the mirror select switch to the neutral position (be-
tween “L” and “R”)
With the shift position in R, adjust the mirror angle at a desired position to set the
mirror angle used when the vehicle is reversing.
The adjusted angle will be memorized and the mirror will automatically tilt to the
memorized angle whenever the shift position is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position
(angle adjusted with the shift position in other than R). Therefore, if the normal
position is changed after adjustment, the tilt position will also change.

1-4. Obtaining the correct driving posture

118