Lexus NX (2022 year). Manual in english — page 13

Brake hold system

WARNING

■

When the vehicle is on a steep incline

When using the brake hold system on a steep incline, exercise caution. The brake hold
function may not hold the vehicle in such a situation.

■

When stopped on a slippery road

The system cannot stop the vehicle when the gripping ability of the tires has been
exceeded. Do not use the system when stopped on a slippery road.

NOTICE

■

When parking the vehicle

The brake hold system is not designed for use when parking the vehicle for a long period
of time. Turning the engine switch off while the system is holding the brake may release
the brake, which would cause the vehicle to move. When operating the engine switch,
depress the brake pedal, shift the shift position to P and set the parking brake.

Turns the brake hold system on

The brake hold system keeps the brake applied when the shift lever is in D, M or
N with the system on and the brake pedal has been depressed to stop the vehicle.
The system releases the brake when the accelerator pedal is depressed with the
shift lever in D or M to allow smooth start off.
The brake hold system keeps the brake applied when the shift position is in D, M or
N with the system on and the brake pedal has been depressed to stop the vehicle.
The system releases the brake when the accelerator pedal is depressed with the
shift position in D or M to allow smooth start off.
Turns the brake hold system on
The brake hold standby indicator (green) comes
on. While the system is holding the brake, the
brake hold operated indicator (yellow) comes on.

3-9. Brake hold system

216

INFORMATION

■

Brake hold system operating conditions

The brake hold system cannot be turned on in the following conditions:

●

The driver’s door is not closed.

●

The driver is not wearing the seat belt.

●

The parking brake is engaged.

If any of the conditions above are detected when the brake hold system is enabled, the
system will turn off and the brake hold standby indicator light will go off. In addition, if any
of the conditions are detected while the system is holding the brake, a warning buzzer will
sound and a message will be shown on the multi-information display. The parking brake
will then be set automatically.

■

Brake hold function

●

If the brake pedal is left released for a period of about 3 minutes after the system has
started holding the brake, the parking brake will be set automatically. In this case, a
warning buzzer sounds and a message is shown on the multi-information display.

●

The brake hold function may not hold the vehicle when the vehicle is on a steep
incline. In this situation, it may be necessary for the driver to apply the brakes. A
warning buzzer will sound and the multi-information display will inform the driver of
this situation. If a warning message is shown on the multi-information display, read the
message and follow the instructions.

●

To turn the system off while the system is holding the brake, firmly depress the brake
pedal and press the button again.

●

When do not wish for the parking brake to operate automatically, press and hold the
brake hold switch until the standby indicator (green) turns off, and then turn the engine
switch off.

■

When the parking brake is set automatically while the system is holding the brakes

Perform any of the following operations to release the parking brake.

●

Depress the accelerator pedal. (The parking brake will not be released automatically if
the seat belt is not fastened.)

●

Operate the parking brake switch with the brake pedal depressed.

Make sure that the parking brake indicator light goes off.

■

When an inspection at any authorized Lexus retailer or Lexus authorized repairer,
or any reliable repairer is necessary

When the brake hold standby indicator (green) does not illuminate even when the brake
hold switch is pressed with the brake hold system operating conditions met, the system
may be malfunctioning.

3-9. Brake hold system

217

Driving accor

ding to the conditions

Have the vehicle checked by any authorized Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.

■

If "Brake Hold Malfunction" is displayed on the multiinformation display

The system may be malfunctioning.
Have the vehicle checked by any authorized Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.

■

Warning messages and buzzers

Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution. If a warning message is shown on the multi-information
display, read the message and follow the instructions.

3-9. Brake hold system

218

Interior features

4-1. Favorite settings

My Settings . . . . . . . . .

220

4-2. Adjusting the preferred driving

position

Enabling easier driver entry

and exit (Power easy access
system). . . . . . . . . . ...

222

Driving position registration/

recall/deletion. . . . . . . .

223

4-3. Adjusting the temperature/envi-

ronment inside the vehicle

Comfortable condition to be

maintained without adjusting
each system (Lexus Climate
Concierge). . . . . . . . ...

227

Air conditioning controls . . ..

229

Heated steering wheel. . . ...

237

Seat heaters. . . . . . . . ...

238

Seat ventilators. . . . . . . ..

240

Using the moon roof . . . . .

241

Using the panoramic moon

roof . . . . . . . . . . . . ..

244

Opening and closing the elec-

tronic sunshade. . . . . . ..

247

4-4. Illuminating the interior

Using the interior lights. . . ..

249

4-5. Using the interior features

Location of the storage fea-

tures . . . . . . . . . . . .

253

Convenient interior features ...

259

4-6. Using the luggage compartment

Using the cargo hooks. . . ...

270

Using the cargo net hooks . .

271

Using the grocery bag hooks..

272

Deck board. . . . . . . . . .

273

Stowing the luggage cover . ..

275

219

Interior feat

Favorite settings

My Settings

By recognizing an individual through a device, such as an electronic key, the
driving position and vehicle settings recorded for that driver can be recalled when
the vehicle is entered. By assigning an authentication device to a driver in advance,
the driver can enter the vehicle with their preferred settings. Settings for up to
3 drivers can be recorded by My Settings. For details on how to assign/delete
electronic keys, set driver names, perform initialization, change drivers manually, or
delete a driver, refer to the "Multimedia owner's manual".

■

Types of assigned authentication devices

An individual can be identified using the following authentication devices.

●

Electronic key

An individual is identified when the smart entry & start system detects their electronic
key.

●

Bluetooth devices

An individual can be detected if the same Bluetooth device that was used as a hands-
free phone the last time the vehicle was entered is connected to the audio system.

■

Recalled functions

When an individual is identified from an authentication device, settings for the
following functions are recalled.

●

Driving position (memory recall function)

After an individual is identified, the driving position that was set when driving was last
completed is recalled when the following operation is performed.
The door is unlocked and opened using the smart entry & start system or wireless
remote control.

●

Meter displays, head-up display

and multimedia information

When an individual is identified, the vehicle settings used when the engine switch was
last turned off are recalled.

●

Vehicle settings that can be set using the center display

When an individual is identified, the vehicle settings used when the engine switch was
last turned off are recalled.

●

Safe driving support function

* :

If equipped

*1 :

Some settings are excluded

4-1. Favorite settings

220

When an individual is identified, the vehicle settings used when the engine switch was
last turned off are recalled.

4-1. Favorite settings

221

Interior feat

Adjusting the preferred driving position

Enabling easier driver entry and exit (Power easy access system)

WARNING

Never use any part of your body to intentionally activate the jam protection function.

When all of the following have been performed,
the driver’s seat and steering wheel are automat-
ically adjusted to a position that allows driver to
enter and exit the vehicle easily.

●

The shift position has been shifted to P.

●

The engine switch has been turned to ACC or ON.

●

The driver’s seat belt has been unfastened.

When any of the following has been performed, the driver’s seat and steering
wheel automatically return to their original positions.

●

The engine switch has been turned to ACC mode or ON.

●

The driver’s seat belt has been fastened.

INFORMATION

■

Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if the seat is
already close to the rearmost position, etc.

■

Jam protection function

While the power easy access system is operating, if an object is stuck behind the front
seat, the front seat will stop and then slightly move forward. When the jam protection
function operates, the seat stops at a position other than the set seat position. Check the
seat position.

Related Links

Customizable features(P. 650)

* :

If equipped

4-2. Adjusting the preferred driving position

222

Driving position registration/recall/deletion

This feature automatically adjusts the positions of the driver’s seat, steering wheel,
outside rear view mirrors and head-up display

to make entering and exiting the

vehicle easier or to suit your preferences.
Up to 3 different driving positions can be recorded for each the driver and guest
that have been registered for My Settings. When electronic key (including a card
key) assignment is registered for My Settings, the driving position for each driver
can be recalled (memory recall function).

INFORMATION

■

Using the voice control system

The following operations can be performed using the voice control system:

●

Driving position registration

●

Driving position recall (only when the shift position is in P)

For details, refer to the "Multimedia owner's manual".

Registering a driving position into memory (position memory function)

Check that the shift position is in P.

Turn the engine switch to ON.

Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up
display

to the desired positions.

While pressing the “SET” button, or within
3 seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.

If a driving position has already been registered
to the selected button, the previously registered
position will be overwritten.

INFORMATION

■

Seat positions that can be memorized

The adjusted positions other than the position adjusted by lumbar support switch can
be recorded.

* :

If equipped

4-2. Adjusting the preferred driving position

223

Interior feat

■

In order to correctly use the driving position memory function

If a seat position is already in the furthest possible position and the seat is operated
in the same direction, the registered position may be slightly different when it is
recalled.

WARNING

Take care during seat adjustment so that the seat does not contact a rear passenger
or squeeze your body against the steering wheel.

Recalling a driving position (position memory function)

WARNING

Never use any part of your body to intentionally activate the jam protection function.

Check that the shift position is in P.

Turn the engine switch to ON.

Press one of the buttons for the driving po-
sition you want to recall until the buzzer
sounds.

INFORMATION

■

To stop the position recall operation part-way through

Perform any of the following:

●

Press the “SET” button.

●

Press button “1”, “2” or “3”.

●

Operate any of the seat adjustment switches (only cancels seat position recall).

●

Operate the tilt and telescopic steering control switch (only cancels steering
wheel position recall).

■

Operating the driving position memory after turning the engine switch off

Registered seat positions can be recalled up to 180 seconds after the driver’s door is
opened and another 61 seconds after it is closed again.

4-2. Adjusting the preferred driving position

224

■

When the recorded seat position cannot be recalled

The seat position may not be recalled in some situations when the seat position is
recorded in a certain range.
For details, contact any authorized Lexus retailer or Lexus authorized repairer, or
any reliable repairer.

■

Jam protection function

While the driving position is recalled or the power easy access system is operating, if
an object is stuck behind the front seat, the front seat will stop and then slightly move
forward. When the jam protection function operates, the seat stops at a position
other than the set seat position. Check the seat position.

■

Recalling a driving position

Take care so that a head restraint does not contact the ceiling or a sun visor.

Registering a driving position to an electronic key (memory recall
function)

The driving positions can be automatically recalled for each registered driver by
registering electronic key assignments in My Settings.
When the shift position is changed to P after driving the vehicle, the current driving
position will be recorded.

Clearing the registered driving position from an electronic key (memo-
ry recall function)

The driving positions can be automatically recalled for each registered driver by
registering electronic key assignments in My Settings.
Initialize the driver registered settings in My Settings.

Recalling the registered driving position from an electronic key (memo-
ry recall function)

The driving positions can be automatically recalled for each registered driver by
registering electronic key assignments in My Settings.

WARNING

Never use any part of your body to intentionally activate the jam protection function.

4-2. Adjusting the preferred driving position

225

Interior feat

Carry only the key that has been assigned and registered in My Settings, and
then unlock and open the driver’s door using the smart entry & start system or
wireless remote control.

The driving position other than the steering wheel will move to the recorded position.
However, the seat will move to a position slightly behind the recorded position in order
to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the driving
position will not move.

Turn the engine switch to ACC or ON.

The seat and steering wheel (only when the engine switch is in ON) will move to the
recorded position.

INFORMATION

■

Jam protection function

■

Recalling a driving position

Take care so that a head restraint does not contact the ceiling or a sun visor.

4-2. Adjusting the preferred driving position

226

Adjusting the temperature/environment inside the vehicle

Comfortable condition to be maintained without adjusting each system
(Lexus Climate Concierge)

Operation of the seat heaters and seat ventilators of the front seats and the heated
steering wheel is performed automatically according to the temperature setting of
the air conditioning system, outside temperature, temperature inside the vehicle,
etc.

Lexus Climate Concierge

Lexus Climate Concierge operates in conjunction with [AUTO] of the air condi-
tioning system.

Select the option screen switch.

→

P.230

Select the [Climate concierge] switch.

Turn the [AUTO] switch on.

Automatically controllable functions

●

Automatic air conditioning system

→

P.229

Operation of the air conditioning system is performed automatically according to the
temperature setting for the driver's side/front passenger's side.

●

Seat heaters

→

P.238

Operation of the seat heaters is performed automatically according to the temperature
setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Seat ventilators

→

P.240

Operation of the seat ventilators is performed automatically according to the tempera-
ture setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Heated steering wheel

→

P.237

Operation of the heated steering wheel is performed automatically according to the
temperature setting of the air conditioning system, outside temperature, etc.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

227

Interior feat

INFORMATION

■

Passenger detection functions

●

When a passenger is detected in the front passenger seat, the seat heater and
ventilator will operate automatically.

●

When the seat heater/seat ventilator switch is set to AUTO, the passenger detection
function will not operate.

■

Rear seat heater operation (vehicles with rear seat heaters)

The rear seat heaters are not controlled by the Lexus Climate Concierge.

4-3. Adjusting the temperature/environment inside the vehicle

228

Air conditioning controls

When the [AUTO] switch is on, the air outlets and fan speed will automatically be
changed according to the set temperature. The button positions and shapes will
differ for right-hand drive vehicles. Also, the display and button positions will differ
depending on the type of the system.

NOTICE

Do not leave the air conditioning system on longer than necessary when the engine is off.

INFORMATION

■

When driving on dusty roads

Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after
closing the windows, it is recommended that the air intake mode be set to outside air
mode and the fan speed to any setting except off.

■

When the outside temperature is low

The dehumidification function may not operate even when [A/C] is selected.

■

Ventilation and air conditioning odors

●

To let fresh air in, set the air conditioning system to the outside air mode.

●

During use, various odors from inside and outside the vehicle may enter into and
accumulate in the air conditioning system. This may then cause odor to be emitted
from the vents.

●

To reduce potential odors from occurring:

•

It is recommended that the air conditioning system be set to outside air mode prior
to turning the vehicle off.

•

The start timing of the blower may be delayed for a short period of time immediate-
ly after the air conditioning system is started in automatic mode.

●

When parking, the system automatically switches to outside air mode to encourage-
better air circulation throughout the vehicle, helping to reduce odors that occur when
starting the vehicle.

■

Using the voice command system

Air conditioning system can be operated using voice commands. For details, refer to
"Multimedia owner's manual"

■

Customization

Functions that are linked to automatic mode (when the [AUTO] switch is on) can be set
through [Vehicle customise] on the center display.

4-3. Adjusting the temperature/environment inside the vehicle

229

Interior feat

Lexus NX (2022 year). Manual in english — page 13

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.